LINKAGE GP-BACKHOE BUCKET 3485465 - Caterpillar

Removal Procedure
Table 1
Required Tooling
Tool Part Number Part Description Qty
A 5P-3931 Anti-Seize Compound - Start By:
Remove exhaust gas valve (NRS).
Illustration 1 g06064173
Remove bolts (2) and position harness assembly (1) out of the way.
Illustration 2 g06064284
Disconnect tube assembly (2) and remove bolt (3).
Illustration 3 g06064347
Remove bolt (4), bolt (5), and bolts (6).
Illustration 4 g06064393
Disconnect harness assembly (7) and position shield assembly (8) out of the way.
Illustration 5 g06064439
Disconnect tube assembly (12).
Remove bolts (9), bolts (10), and bolt (11). Position shield assembly (13) out of the way.
Illustration 6 g06064450
Remove sensor (15).
Remove clamp (14) and venturi tube (16).Note: Clamp (14) is one time use only, discard and replace with new clamp.Installation Procedure
Install venturi tube (16) in the reverse order of removal.
Lubricate the threads, bearing surfaces, and inside diameter of clamp (14) with Tooling (A) before assembly.
Tighten clamp (14) to a torque of 12 1 N m (106 9 lb in).
Tighten sensor (15) to a torque of 10 2 N m (89 18 lb in).