LINKAGE GP-IMPLEMENT 3P3278 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1
Illustration 1 g02294113
Use Tooling (A) to remove engine oil filters (4).
Remove bracket (3)
Remove bolts (1) and remove the engine oil filter base (2).
Illustration 2 g02294238
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove cover (5), gasket (6), springs (7) and plungers (8) from oil filter base (2). Installation Procedure
Install the engine oil filter base (2) in the reverse order.
Apply clean engine oil to the oil filter seals prior to installation. Install the engine oil filters until the oil filter seal contacts the base, then turn the engine oil filters one full turn.