LINKAGE GP-IMPLEMENT 6Y3528 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite Gasket Sealant No. 2 -
B - Loctite 271 -
Illustration 1 g00924839
Install O-ring seal (17) and temperature sender assembly (18).
Apply Tooling (A) to screen (16). Install screen (16), O-ring seal (15), and tube assembly (14). Apply Tooling (B) to bolts (13). Install bolts (13). Tighten bolts (13) to a torque of 8 2 N m (71 18 lb in).
Install grommet (11) and elbow (12).
Position sight gauge (10) and install bolts (9). Torque bolts (9) to 9 1 N m (80 9 lb in).
Illustration 2 g00924835
Position tank (7). Install bracket (3) and bolts (2).
Connect hoses (6). Tighten clamps (5). Tighten clamp (4).
Connect hose (1). Connect harness assembly (8) (not shown).
Fill the hydraulic system oil tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".