LITERATURE GP 5N6957 - Caterpillar

5N6957 LITERATURE GP Caterpillar parts

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5N6957
5N-6957
5N6957

Buy LITERATURE GP 5N6957 Caterpillar genuine, new aftermarket tractor parts with delivery

For full view, you need register

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

G3606 INDUSTRIAL 4ZS00001-UP

SDD-NZ00: G3606,IENG,E537-,4ZS1-UP,MASTER » SEBP37921924

G3616 GENERATOR AND INDUSTRIAL BLB00001-UP

SFV-JB00: G3616,IENG,E540-,BLB1-UP » SEBP37950839
SFV-HY00: G3616,IENG,E540-,BLB1-UP » SEBP37950841
SGW-CV00: G3616,IENG,E540-,BLB1-UP » SEBP37950842
SGW-CX00: G3616,IENG,E540-,BLB1-UP » SEBP37950843
SFV-HZ00: G3616,IENG,E540-,BLB1-UP » SEBP37950844
SGW-CT00: G3616,IENG,E540-,BLB1-UP » SEBP37950845

Information:

Illustration 1 g01352576
(1) Installed piston cooling jets The valve must move freely. Torque for the bolt ... 9 N m (7 lb ft)Piston Cooling Jet Alignment
Illustration 2 g01352578
(2) Piston cooling jet
(3) Rod
(4) Cylinder block Use the following procedure in order to check the alignment of the piston cooling jet.
Insert rod (3) into the end of the piston cooling jet (2). Rod (3) has a diameter of 1.70 mm (0.067 inch). Rod (3) must protrude out of the top of the cylinder block.
Dimension (A) is 58.5 mm (2.30315 inch) and dimension (B) is 13.5 mm (0.53150 inch). Dimension (A) and dimension (B) are tangential to the cylinder bore (4).
The position of the rod (3) must be within dimension (C). Dimension (C) is 10 mm (0.39370 inch). Note: Ensure that the rod (3) can not damage the piston cooling jet when the alignment is checked. The piston cooling jets can not be adjusted. If a piston cooling jet is not in alignment the piston cooling jet must be replaced.