LOCK WASHER 0802016 - Caterpillar

Throttle Control
Engine governor high idle has been set to run at 2900 rpm. This idle speed is necessary for optimum vibratory efficiency and should not be raised or lowered.
1. To start the unit, pull the throttle control handle out to approximately one half throttle and turn handle clockwise to lock in place.2. To place the engine in low idle, turn the throttle handle counter-clockwise and push all the way in.3. To operate the unit, pull the throttle control handle all the way out and turn the handle clockwise to lock in place. The engine should always be run at full throttle during unit operation.