LOCK-NUT 0L1126 - Caterpillar

Illustration 1 g01237741
(A) Chisel Tool (B) Moil Tool (C) Parallel Spade Tool (D) Transverse Spade Tool (E) Compacting Plate
Illustration 2 g01166173
(F) Diameter of Tool (G) Area of tool inside the hammer
Table 1
Tools for H65D S    
Tool     Part Number     Length of Tool     Working Length     Tool Weight     Diameter of Tool (F)    
Chisel Tool (A)     254-1455    
580 mm (22.83 inch)    
330 mm (13 inch)    
14 kg (30.86 lb)    
65 mm (2.56 inch)    
Moil Tool (B)     254-1456    
580 mm (22.83 inch)    
330 mm (13 inch)    
13.6 kg (29.98 lb)    
65 mm (2.56 inch)    
Parallel Spade tool (C)     254-1461    
570 mm (22.44 inch)    
320 mm (12.60 inch)    
12.9 kg (28.44 lb)    
65 mm (2.56 inch)    
Transverse Spade Tool (D)     254-1462    
570 mm (22.44 inch)    
320 mm (12.60 inch)    
12.9 kg (28.44 lb)    
65 mm (2.56 inch)    
Compacting Plate Tool (E)     254-1459    
485 mm (19.09 inch)    
485 mm (19.09 inch)    
26.2 kg (57.76 lb)    
65 mm (2.56 inch)    Note: If the diameter of the tool (F) inside the hammer (Area (G) ) is less than 63 mm (2.48 inch), replace the tool. Wear will be greater at the lower end of the tool within area (G).