LOCK 1273990 - Caterpillar

Illustration 1 g06031374
(1) “Pave Start Assistant” buttonPave Start Assistant enables the operator to save the current configuration of the machine and to easily reload it to the exact same setting.Note: Pave Start Assistant will show only when the Cylinder Position Sensors are installed.Paving Calculator
The Paving Calculator is used by the operator to help plan various tasks.
Illustration 2 g06031376
(2) Paving Calculator menu button
Press the Paving Calculator menu button (2). The button will turn blue, then turn yellow. The Paving Calculator menu page will appear.
Illustration 3 g06031382
(3) Paving Calculator Menu buttons
(4) Non-Interactive Scroll Bar with Sliding Indicator
Illustration 4 g06031389
(3) Paving Calculator Menu buttons
(5) UP Arrow button
(6) OK button
(7) DOWN Arrow button
(8) BACK button
(9) HOME button
The Paving Calculator menus are:
Trucking
Paver Speed
Yield
Slope
ThicknessTo scroll through the menu list, press the UP Arrow button (5) or the DOWN Arrow button (7). The Sliding Indicator of the Non-Interactive Scroll Bar (4) will move accordingly with the page.
Press the intended menu button (3). The button will turn blue, then turn yellow. The intended input page will appear.
Illustration 5 g06031395
Example: Paver Calculator > Trucking
(10) Input Page (Example: Trucking)
Press the intended Calculator button. The Calculator keypad page will appear.
Illustration 6 g06031401
(6) OK button
(8) BACK button
(9) HOME button
(11) Calculator keypad
(12) Keypad BACK button
Press the numbers on the keypad to enter intended value. Press the Keypad BACK button (12) to backspace over a number.
Press the OK button (6) to advance to the next page.
Illustration 7 g06031415
(8) BACK button
(9) HOME button
Press the BACK button (8) to return to the Main Menu.
Press the HOME button (9) to return to the Home Page.
Illustration 8 g06031419
Illustration 9 g06031429Note: There may be more than one input page per category. For example, the Trucking page has a total of three input pages. Press the OK button (6) to move to the next input page.The following input pages of the Paver Calculator are shown below.Trucking
Trucking > General Inputs
Plant Production Rate
Silo Plant Storage
Truck Capacity
Paving HoursTrucking > Truck Cycle Times to Job
Tarp
Load Time
Haul to JobTrucking > Truck Cycle Times to Return
Dump/Clean
Time on Site
Return HaulPaver Speed
Paver Speed > General Inputs
Plant Production Rate
Paving Thickness
Paving Width
Material DensityYield
Yield > General Inputs
Length of Mat
Paving Thickness
Paving Width
Material Density
Truck CapacitySlope
Slope > General Inputs
Percent of Slope
Mat WidthThickness
Thickness > General Inputs
Initial Density
Compacted Mat Thickness
Final DensityNote: Unit Measurements can be set to either English or Metric. For more information, refer to the following section in this manual:
Display > Units