LOCK GP-CENTERSHIFT 1428205 - Caterpillar

AFFECTED PRODUCT
Model Identification Number
621G DBB00479-00481, 483-485, 487-500, 502-511, 515-519, 526, 533-539, 551-556, 558-559, 566-581, 588, 590-593, 598, 600-603, 605-606, 613, 615, 617-618, 621-622, 626, 628-652
621G (OEM) DXB00100-00130
621G OEM MSE00125, 128, 131-143, 145-177, 179-187
623G DBC00342-00506
627G DBD00581-00903
CIPI 0EM02019-02020, 2022-2024, 2043
PARTS NEEDED
Qty
Part Number Description
2 3385012 PLATE
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 9% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-6000 hrs,
0-36 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job
This rework is to be reported as an after-failure repair only if the interference of the strap being replaced caused a fluid leak.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Refer to the Service Manual if/as required.
1. Remove the 228-5319 Crankcase Guard mounting hardware and lower the 228-5319 Crankcase Guard per Disassembly and Assembly manual instruction titled "Crankcase Guard - Remove and Install".
Image1.1.1
2. Remove RH 284-3132 Strap (1). This part will not be reused. The RH strap mounting bolts and washers will be reused.
Image1.2.1
3. Install 338-5012 Plates (2) using bolts and washers removed in previous step.
4. Raise the 228-5319 Crankcase Guard and reinstall the Crankcase Guard mounting hardware per Disassembly and Assembly manual instruction titled "Crankcase Guard - Remove and Install".