2058260 LOCK NUT Caterpillar parts
D6T, RM-350B
Rating:
Alternative (cross code) number:
CA2058260
205-8260
2058260
CA2058260
205-8260
2058260
Weight: 0.60 pounds 0 kg.
Information:
COATING/PLATING
Phosphate and Oil Coating
HEX LENGTH
57.15
mm
HEIGHT
21.03
mm
MATERIAL
Steel -600 Mpa Tensile strength min
SERRATED FACE
N
STYLE
NYLON RING
THREAD SIZE
1.50-12
RECLAIMER MIXER, TRACK-TYPE TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$24.89
27 May 2022
Amazon.com
Aervoe Industries Crown 205-8260 Heavy Duty Cleaner & Degreaser Cfc Free Ae,A8260-1
Aervoe Industries A heavy-duty, citrus-based cleaner that is safe on most plastics || Wipes off without rinsing || Does not leave a residue || Do not use on electrical equipment or machinery while in operation || Made in the USA!
Aervoe Industries A heavy-duty, citrus-based cleaner that is safe on most plastics || Wipes off without rinsing || Does not leave a residue || Do not use on electrical equipment or machinery while in operation || Made in the USA!
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 168-0383 Breaker Bar 1 Start By:
Remove the right side engine enclosure.
Open the left side door for the engine compartment.
Remove the left side, lower engine guard.
Illustration 1 g02793424
Illustration 2 g02793482
Remove bolts (1) and fan guard (2) .
Illustration 3 g02793518
Illustration 4 g02882397
Loosen bolts (4) .
Insert Tooling (A) into Hole (X). Use Tooling (A) to release tension on belt (7). Position belt (7) out of the way.
Remove bolts (4) .
Remove fan (3), spacer (6), and pulley (5) .Installation Procedure
Install the fan and fan guard in the reverse order of removal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 168-0383 Breaker Bar 1 Start By:
Remove the right side engine enclosure.
Open the left side door for the engine compartment.
Remove the left side, lower engine guard.
Illustration 1 g02793424
Illustration 2 g02793482
Remove bolts (1) and fan guard (2) .
Illustration 3 g02793518
Illustration 4 g02882397
Loosen bolts (4) .
Insert Tooling (A) into Hole (X). Use Tooling (A) to release tension on belt (7). Position belt (7) out of the way.
Remove bolts (4) .
Remove fan (3), spacer (6), and pulley (5) .Installation Procedure
Install the fan and fan guard in the reverse order of removal.