LOCK 3B4897 - Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, and filters. The user is also responsible for the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components. Use fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Battery - Replace
Battery or Battery Cable - Disconnect
DEF Filler Screen - Clean
Diesel Exhaust Fluid - Fill
Diesel Exhaust Fluid Tank - Flush
Engine - Clean
Engine Air Cleaner Element (Single Element) - Inspect/Replace
Engine Oil Sample - Obtain
Fuel System - Prime
Generator - Dry
Generator Set - Test
Rotating Rectifier - Test
Aftercooler Core - Clean/Test
Daily
Cooling System Coolant Level - Check
Electrical Connections - Check
Engine Air Cleaner Service Indicator - Inspect
Engine Air Precleaner - Check/Clean
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Generator Load - Check
Walk-Around Inspection
Every Week
Driven Equipment - Check
Hoses and Clamps - Inspect/Replace
Every 50 Service Hours or Weekly
Fuel Tank Water and Sediment - Drain
Generator - Inspect
Every 250 Service Hours
Engine Oil Sample - Obtain
Every 500 Service Hours
Fan Clearance - Check
Every 500 Service Hours or 1 Year
Battery Electrolyte Level - Check
Engine Air Cleaner Element (Single Element) - Inspect/Replace
Engine Oil and Filter - Change
Fuel Filter (In-Line) - Replace
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter - Replace
Hoses and Clamps - Inspect/Replace
Radiator - Clean
Every 1000 Service Hours
Belt - Inspect
Belt Tensioner - Inspect
Water Pump - Inspect
Every 1000 Service Hours or 1 Year
Rotating Rectifier - Check
Every 1500 Service Hours
Engine Crankcase Breather Element - Replace
Diesel Exhaust Fluid Filter - Replace
Every 2000 Service Hours
Aftercooler Core - Inspect
Alternator - Inspect
Clean Emissions Module Support - Inspect
Engine Mounts - Inspect
Starting Motor - Inspect
Turbocharger - Inspect
Every 2000 Service Hours or 6 Months
Insulation - Test
Every Year
Engine Air Cleaner Element (Single Element) - Inspect/Replace
Every 3000 Service Hours
Alternator and Fan Belts - Replace
Every 3000 Service Hours or 2 Years
Cooling System Coolant (DEAC) - Change
Every 4000 Service Hours
Aftercooler Core - Clean/Test
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 10 000 Service Hours
DEF Manifold Filters - Replace
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change
Overhaul
Overhaul Considerations