LOCK 4M8210 - Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, and filters. The user is also responsible for the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components. Use fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Battery - Recycle
Battery - Replace
Battery Charger - Check
Battery or Battery Cable - Disconnect
DEF Filler Screen - Clean
Diesel Exhaust Fluid - Fill
Enclosure - Inspect
Engine - Clean
Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
Fuel System - Prime
Generator - Dry
Generator Set - Test
Generator Set Alignment - Check
Stator Winding Temperature - Test
Daily
Coolant Level - Check
Engine Air Cleaner Service Indicator - Inspect
Engine Oil Level - Check
Fuel System Water Separator - Check/Drain
Fuel Tank Water and Sediment - Drain
Trailer - Inspect
Walk-Around Inspection
Every 6000 Service Hours or 3 Years
Coolant (ELC) - Change
Coolant Extender (ELC) - Add
PM Level 2 - Every 83 250 L (22 000 US gal) of Fuel or 2000 Service Hours or 1 Year
Engine Valve Lash - Check
Every 6000 Service Hours or 6 Years
Coolant Temperature Regulator - Replace
Every 10 000 Service Hours
DEF Manifold Filters - Replace
Every Week
Automatic Start/Stop - Inspect
Battery Charger - Check
Electrical Connections - Check
Generator - Inspect
Generator Bearing Temperature - Test/Record
Generator Load - Check
Voltage and Frequency - Check
Overhaul
Generator Bearing - Replace
Overhaul Considerations
Every 250 Service Hours
Coolant Sample (Level 1) - Obtain
Every 250 Service Hours or 6 Months
Battery Electrolyte Level - Check
Engine Oil Sample - Obtain
Every 500 Service Hours or 1 Year
Belts - Inspect/Adjust/Replace
Engine Oil and Filter - Change
Fuel System Primary Filter (Water Separator) Element - Replace
Every 6 Months
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Every 2000 Service Hours
Fumes Disposal Filter Element - Replace
Every 2000 Service Hours or 6 Months
Generator Set Vibration - Test/Record
Hoses and Clamps - Inspect/Replace
Every 2000 Service Hours or 1 Year
Coolant Sample (Level 2) - Obtain
Radiator - Clean
Stator Lead - Check
Every Year
Alternator - Inspect
Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
Generator Bearing - Inspect
Every 3 Years
Coolant Temperature Regulator - Replace
Every 3000 Service Hours or 3 Years
Alternator - Inspect
Coolant (DEAC) - Change
Engine Mounts - Inspect
Starting Motor - Inspect
Every 4500 Service Hours
Generator Bearing - Lubricate
Every 5000 Service Hours
ARD Spark Plug - Clean
Diesel Exhaust Fluid Filter - Replace
Diesel Particulate Filter - Clean/Replace