5M9419 LOCK Caterpillar parts
1693, 631C, 633C, 657, 769, 824B, 825B, D343
Rating:
Alternative (cross code) number:
CA5M9419
5M-9419
5M9419
CA5M9419
5M-9419
5M9419
Weight: 0.04 pounds 0 kg.
INDUSTRIAL ENGINE, WHEEL TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$8.97
29 Jul 2022
Amazon.com
CTP 5M9419 Lock for Heavy Equipment
CTP Lock Only || Sold in each || Easy in-and-out fit
CTP Lock Only || Sold in each || Easy in-and-out fit
$9.99
15 Feb 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar Lock 5M9419 New
$9.48
22 Dec 2018
11 Hundredths Pounds
CTP: CTP
Caterpillar LOCK (5M9419)
5M9419 Weight(lbs): 0.10 Length(cm): 15.2400 Width(cm): 12.7000 Depth(cm): 2.5400
5M9419 Weight(lbs): 0.10 Length(cm): 15.2400 Width(cm): 12.7000 Depth(cm): 2.5400
Number on catalog scheme:
None
For full view, you need register
Compatible equipment models: 5M9419:
Information:
Probable Causes
Misreading oil level
Oil leaks
Engine crankcase breather
Oil level
Air intake and exhaust system
Turbocharger
Low compression (cylinder pressure)Recommended Actions
Note: The procedures have been listed in order of probability. Complete the procedures in order.
Table 1
Troubleshooting Test Steps Values Results
1. Misreading Oil Level
A. Accurately measure the consumption of oil and fuel over a period of 50 engine hours.
Oil level
Result: The oil consumption is less than 0.08% of the fuel consumption.
Oil consumption is within specification. Return the unit to service
Result: The oil consumption is greater than 0.08% of the fuel consumption.
Proceed to Test Step 2.
2. Oil Leaks
A. Check for evidence of oil leaks on the engine.
B. Check for evidence of oil in the coolant.
Oil leaks
Result: An oil leak is identified.
Repair: Rectify the cause of the oil leak.
Result: Oil is present in the coolant.
Repair: Refer to Troubleshooting, "Coolant Contains Oil".
Result: No oil leaks are identified
Proceed to Test Step 3.
3. Engine Crankcase Breather
A. Check the engine crankcase breather for blockage or restrictions.
B. Check for excessive oil from the outlet of the breather.
Breather
Result: The engine crankcase breather is blocked or restricted.
Repair: Clear the blockage or restriction.
Result: Excessive oil is ejected from the outlet of the breather.
Repair: Investigate the cause of the excessive oil content in the breather flow. If equipped, replace the filter in the breather.
Result: No oil is ejected through the breather.
Proceed to Test Step 4.
4. Oil Level
A. Check for a high oil level in the engine.
Oil level
Result: The oil level in the engine is high.
Repair: Make sure that the oil is not contaminated with fuel. Refer to Troubleshooting, "Oil Contains Fuel".
Make sure that the oil is not contaminated with coolant. Refer to Troubleshooting, "Oil Contains Coolant".
Remove the excess oil.
Result: The oil level is OK.
Proceed to Test Step 5.
5. Air Intake and Exhaust System
A. Check the air filter restriction indicator, if equipped.
Check the air intake and the exhaust system for the following defects:
Blockages
Restrictions
Damage to the air intake and exhaust lines and hose
Air intake and exhaust system
Result: The air filter restriction indicator has operated or the air filter is blocked.
Repair: Make sure that the air filter is clean and serviceable. If necessary, replace the air filter.
Result: The air intake or the exhaust system is blocked, restricted, or damaged.
Repair: Repair the air intake or the exhaust system, as required.
Result: The air intake or the exhaust system is OK.
Proceed to Test Step 6.
6. Turbocharger
Note: The turbocharger that is installed on this engine is a nonserviceable item. If any mechanical fault exists, then the turbocharger must be replaced.
A. Check that the oil drain for the turbocharger is not blocked or restricted.
B. Check the turbocharger for evidence of an internal oil leak.
Turbocharger
Result: The oil drain for the turbocharger is blocked or restricted.
Repair: Remove the blockage or restriction. If necessary, replace the oil drain line.
Result: The turbocharger has an internal oil leak.
Repair: Replace the turbocharger.
Result: The turbocharger is OK.
Proceed to Test Step 7.
7. Low Compression (Cylinder Pressure)
A. Perform a compression test. Refer to Systems Operation, Testing, and Adjusting, "Compression - Test ".
Cylinder compression
Result: The results of the compression test are outside the
Misreading oil level
Oil leaks
Engine crankcase breather
Oil level
Air intake and exhaust system
Turbocharger
Low compression (cylinder pressure)Recommended Actions
Note: The procedures have been listed in order of probability. Complete the procedures in order.
Table 1
Troubleshooting Test Steps Values Results
1. Misreading Oil Level
A. Accurately measure the consumption of oil and fuel over a period of 50 engine hours.
Oil level
Result: The oil consumption is less than 0.08% of the fuel consumption.
Oil consumption is within specification. Return the unit to service
Result: The oil consumption is greater than 0.08% of the fuel consumption.
Proceed to Test Step 2.
2. Oil Leaks
A. Check for evidence of oil leaks on the engine.
B. Check for evidence of oil in the coolant.
Oil leaks
Result: An oil leak is identified.
Repair: Rectify the cause of the oil leak.
Result: Oil is present in the coolant.
Repair: Refer to Troubleshooting, "Coolant Contains Oil".
Result: No oil leaks are identified
Proceed to Test Step 3.
3. Engine Crankcase Breather
A. Check the engine crankcase breather for blockage or restrictions.
B. Check for excessive oil from the outlet of the breather.
Breather
Result: The engine crankcase breather is blocked or restricted.
Repair: Clear the blockage or restriction.
Result: Excessive oil is ejected from the outlet of the breather.
Repair: Investigate the cause of the excessive oil content in the breather flow. If equipped, replace the filter in the breather.
Result: No oil is ejected through the breather.
Proceed to Test Step 4.
4. Oil Level
A. Check for a high oil level in the engine.
Oil level
Result: The oil level in the engine is high.
Repair: Make sure that the oil is not contaminated with fuel. Refer to Troubleshooting, "Oil Contains Fuel".
Make sure that the oil is not contaminated with coolant. Refer to Troubleshooting, "Oil Contains Coolant".
Remove the excess oil.
Result: The oil level is OK.
Proceed to Test Step 5.
5. Air Intake and Exhaust System
A. Check the air filter restriction indicator, if equipped.
Check the air intake and the exhaust system for the following defects:
Blockages
Restrictions
Damage to the air intake and exhaust lines and hose
Air intake and exhaust system
Result: The air filter restriction indicator has operated or the air filter is blocked.
Repair: Make sure that the air filter is clean and serviceable. If necessary, replace the air filter.
Result: The air intake or the exhaust system is blocked, restricted, or damaged.
Repair: Repair the air intake or the exhaust system, as required.
Result: The air intake or the exhaust system is OK.
Proceed to Test Step 6.
6. Turbocharger
Note: The turbocharger that is installed on this engine is a nonserviceable item. If any mechanical fault exists, then the turbocharger must be replaced.
A. Check that the oil drain for the turbocharger is not blocked or restricted.
B. Check the turbocharger for evidence of an internal oil leak.
Turbocharger
Result: The oil drain for the turbocharger is blocked or restricted.
Repair: Remove the blockage or restriction. If necessary, replace the oil drain line.
Result: The turbocharger has an internal oil leak.
Repair: Replace the turbocharger.
Result: The turbocharger is OK.
Proceed to Test Step 7.
7. Low Compression (Cylinder Pressure)
A. Perform a compression test. Refer to Systems Operation, Testing, and Adjusting, "Compression - Test ".
Cylinder compression
Result: The results of the compression test are outside the
Cat SIS web machinery list:
Parts lock Caterpillar catalog:
631C, 769, 824B, 825B, 983
657, 657B, 666, 769, 772, 834, 992, D9G, D9H
16, 16G, 561D, 651, 657, 768B, 769, 769C, 772, 773, 955H
16, 621, 621B, 623B, 627, 627B, 630B, 631B, 631C, 631D, 633D, 637, 637B, 637D, 639D, 641B, 650B, 651, 651B, 657, 657B, 666, 769, 834, 992, D8H, D9G
641, 651, 657, 657B, 666, 769, 772, 834, 992
12F, 14E, 621, 768B, 769, 980
16, 631C, 657, 769, 824B, 834, 988
641B, 777, 824, 824B, 988
16, 651, 657, 666, 768B, 769, 772, 773
824, 824B, 825B, 834, 988, 992
16, 769, 772, 824B, 825B, 834, 988, 992
16, 824, 824B, 834, 988
633C, 657, 824B, 825B, D343
1693, 631C, 633C, 651, 657, 657B, 666, 769, 824, D343
7L9393
LOCK
D348
D348
14E, 16, 1676, 1693, 594, 613, 621, 621B, 623B, 627B, 631C, 633C, 637D, 641, 641B, 650B, 651, 657, 657B, 666, 768B, 769, 772, 773, 777, 824, 824B, 825B, 834, 955C, 977D, 983, 988, 992, D10, D315, D320...
12F, 14E, 16, 1693, 561B, 561C, 631C, 651, 657, 657B, 666, 768B, 769, 824B, 834, 955H, 977H, 983, 988, D320A, D330A, D342C, D343, D4D, D4E, D4E SR, D5, D5B, D5E, D6C, D6D, D7F, D7G, G343
3304, 3306, 561C, 941, 955L, 966C, D4D, D6C, D7F
12E, 1673, 1673B, 1673C, 3306, 518, 561B, 657, 941, 950, 951B, 955H, 966C, 977H, D320A, D330A, D330B, D333A, D333B, D4D, D5, D6C, D7F, D8K, G3306
16, 1693, 657, 769, 977D, 988, D315, D326F, D337F, D343
16, 1693, 631C, 650B, 657, 657B, 769, 772, 773, 777, 824, 824B, 834, 983, 988, 992, D10, D343, D346, D348, D349, G343
16, 631C, 641, 651, 657, 657B, 666, 769, 824, 824B, 834, 988, D343, G343
16, 1693, 631C, 657, 657B, 769, 824, 824B, 834, 983, 988, D343, G343
4L7773
LOCK
3192, D320A
3192, D320A