LOCK 7L5436 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     447-0910     Electric Hydraulic Pump Gp (115 V)     1    
447-0911 Electric Hydraulic Pump Gp (230 V)     1    
9U-7536 Lift Stand     2    Start By:
Connect the steering frame lock.
Remove the front cleaner bars.
Place suitable blocks in front and in back of the rear compactor wheels.
Illustration 1 g03686334
Position Tooling (A) under the loader frame of the machine. Use Tooling (A) in order to raise the machine until compactor wheel (1) is off the ground. Lock Tooling (A) with the locking ring.
Attach a suitable lifting device to compactor wheel (1) . The weight of compactor wheel (1) is approximately 1980 kg (4365 lb).
Remove nuts (2) . Use the suitable lifting device in order to remove compactor wheel (1) from the machine.Installation Procedure
Install compactor wheel (1) in the reverse order of removal.
Tighten nuts (2) to a torque of 570 80 N m (420 60lb ft).