LOCK-BOLT 9M6775 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g02007277
Remove bolts (1), elbow (2), the gasket and the O-ring seal.
Disconnect tube assembly (3) from adapter (6).
Remove bolts (4) and adapter (6).
Remove adapter (5), the sleeve, and the O-ring seal.
If necessary, remove bolt (7) and exhaust manifold (8).
Illustration 2 g02007993
Remove bolts (10) and adapter (9).
Remove adapter (11), the sleeve, and the O-ring seal.
Illustration 3 g02007995
Attach Tooling (A) and a suitable lifting device to aftercooler housing (13). For 3508