LOCKNUT 0964883 - Caterpillar

Entering data
In text and number fields in any of the dialogs, complete the following actions:
Press the up arrow or the down arrow in order to scroll through the available characters.
Press the left arrow in order to delete the last character.
Press the right arrow in order to add additional characters.Panning around the screen
Press the arrow keys in order to control the position of the "Plan View" screen, "Cross Section View" screen, or the "Profile View" screen:
Press the right arrow in order to move the view to the right.
Press the left arrow in order to move the view to the left.
Press the up arrow in order to move the view up.
Press the down arrow in order to move the view down.Display brightness
The brightness of the display can be adjusted:
From the "Setup Menu-Configuration" dialog, press the up arrow or the down arrow until "Display and Light Bar Brightness" is highlighted.Note: If the light bars are not configured, the dialog will show "Display Brightness".
Press the "OK" key. The "Display and Lightbar Brightness" dialog appears. Refer to Illustration 3.The "Display brightness" dialog is shown as the default.Note: If this option is not available, use the quick keys that are described below. Contact your supervisor if you need more assistance.
Illustration 3 g01280812
In order to adjust the brightness of the display, press the "Display" Soft Key. The field changes to "Display brightness".Do one of the following:
Press the up arrow or the down arrow in order to increase or decrease the brightness.
Press the "Set Maximum" in order to select the maximum brightness.
Press the "OK" key in order to save the settings and return to the "Setup Menu - Configuration" dialog. Press the "ESC" key (4) and then press the "OK" key (10) in order to cancel the changes.
Press the "ESC" key in order to exit the "Setup Menu - Configuration" dialog. All changes take effect immediately.Alternatively, you can adjust the brightness of the display when you are not in the "Display and Lightbar Brightness" dialog.
In order to increase the brightness of the display, hold down the Menu key and press "+".
In order to decrease the brightness of the display, hold down the Menu key and press the minus sign "-".Working With Display Information
Before you can begin work you must enter the configuration and setup information into the system, and view the current system state. You do this by working with screens called menus and dialogs. Menus allow you to select a dialog. Dialogs permit you to specify setup and configuration information. Dialogs allow you to view information about the state of system components.
Illustration 4 g01280804
AccuGrade GPS Display (1) LCD Screen (2) Soft Key Labels (3) Soft Keys (4) Next Key (5) Escape Key (6) Slot for Data Card (7) Power Key (8) Menu Key (9) Arrow Keys (10) OK Key (11) Zoom out Key (12) Zoom in KeyWhen you are working with the Display, you will be using a mix of keys, soft keys, menus, dialogs and guidance screens. The availability of many of these items is