LOCKNUT 1346437 - Caterpillar

Display
Mounting
The display is mounted in the cab and placed in an area that is visible by the operator.
Illustration 1 g03405915
Touch Screen Display
The following information lists the functions of the display:
The display monitors the data from the system components.
The display monitors the status of the system components.
The display shows the information to the operator.
The display warns the operator of objects and/or faults.
The display provides an operator interface to control the system.The display consists of the following components:
A capacitive touch display.
An audible alarm.Object Detection Sensor
Illustration 2 g03406116
Object Detection Sensor
The system utilizes one, two, or three medium range object detection sensors depending on application. Machines will use sensors mounted at the rear of the machine. These sensor can be used to increase awareness of objects, within the coverage area, to the machines rear. This sensor provides information on proximity to the detected object.Note: The system can be equipped with either a C5 or C6 model Object Detection Sensor. The system can use up to three sensors depending on application.Note: The system can use up to three sensors.Camera
Illustration 3 g01223051
Camera
The camera provides the operator with a view of the rear of the machine. The camera is used to identify objects to the rear of the machine.