7R4546 LOCKNUT Caterpillar parts
CS-551, CS-583
Rating:
Alternative (cross code) number:
CA7R4546
7R-4546
7R4546
CA7R4546
7R-4546
7R4546
Weight: 0.01 pounds 0 kg.
VIBRATORY COMPACTOR,
Number on catalog scheme:
11
For full view, you need register
Information:
Assembly And Installation Of The 6V2023 Flow Check Adapter Group
First, assemble the 6V2023 Flow Check Adapter Group as per the illustration.
Components of the 6V2023 Flow Check Adapter Group.For use on precombustion and direct injection engines without reverse flow check valves, remove the 6V2018 Pin. Next, put the 6F0612 Nut (jam nut) at the top of the threads and push the 6L3921 Washer against it. Tighten, by hand, the 6V2020 Adapter against the 6F0612 Nut and 6L3921 Washer. Install the flow check group on the desired pump bonnet and tighten the 6V2019 Nut to a maximum of 30 lb. ft. (40 N m). Begin the flow timing check.
For direct injection engines with reverse flow check valves, loosen the 6V2020 Adapter so .2" (0.5 mm) or less of the 6V2018 Pin is out of the adapter. Then, remove the 5P580 Tube. Install the flow check adapter group to the desired pump bonnet and tighten the 6V2019 Nut to 30 lb. ft. (40 N m). Turn the 6V2021 Fitting until the 6V2018 Pin starts to push on the reverse flow check valve. Some resistance will be felt when the pin pushes on the valve. Turn the fitting another one-fourth (1/4) turn and move the 6L3921 Washer against the 6V2020 Adapter and tighten, by hand, the 6F0612 Nut. Connect the 5P580 Tube and begin the flow timing check.
First, assemble the 6V2023 Flow Check Adapter Group as per the illustration.
Components of the 6V2023 Flow Check Adapter Group.For use on precombustion and direct injection engines without reverse flow check valves, remove the 6V2018 Pin. Next, put the 6F0612 Nut (jam nut) at the top of the threads and push the 6L3921 Washer against it. Tighten, by hand, the 6V2020 Adapter against the 6F0612 Nut and 6L3921 Washer. Install the flow check group on the desired pump bonnet and tighten the 6V2019 Nut to a maximum of 30 lb. ft. (40 N m). Begin the flow timing check.
For direct injection engines with reverse flow check valves, loosen the 6V2020 Adapter so .2" (0.5 mm) or less of the 6V2018 Pin is out of the adapter. Then, remove the 5P580 Tube. Install the flow check adapter group to the desired pump bonnet and tighten the 6V2019 Nut to 30 lb. ft. (40 N m). Turn the 6V2021 Fitting until the 6V2018 Pin starts to push on the reverse flow check valve. Some resistance will be felt when the pin pushes on the valve. Turn the fitting another one-fourth (1/4) turn and move the 6L3921 Washer against the 6V2020 Adapter and tighten, by hand, the 6F0612 Nut. Connect the 5P580 Tube and begin the flow timing check.
Caterpillar parts catalog:
Parts locknut Caterpillar catalog:
7R8914
LOCKNUT
CS-551
CS-551
0817573
LOCKNUT
AP-800
AP-800
0818327
LOCKNUT
AP-1200
AP-1200
324D, 325B L, 325C, 325C FM, 325D FM, 325D FM LL, 329D LN, 330B, 330B L, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG,...
2030524
LOCKNUT
AD45, AD55, AD55B, AD60
AD45, AD55, AD55B, AD60
0875385
LOCKNUT
325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D L, 350, 350 L, 365B, 365B II, 365B L, 365C, 365C L, 385C, 385C FS, 5080, 5090B, M325B, M325C M...
325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D L, 350, 350 L, 365B, 365B II, 365B L, 365C, 365C L, 385C, 385C FS, 5080, 5090B, M325B, M325C M...
0870319
LOCKNUT
AP-800
AP-800
0691383
LOCKNUT
CB-614
CB-614
6R1022
LOCKNUT
AP-1200
AP-1200
0812433
LOCKNUT
CB-521, CB-534, PS-300
CB-521, CB-534, PS-300
1C4380
LOCKNUT
PR-750B
PR-750B
7X9542
LOCKNUT
CB-434
CB-434