LOCKWASHER 0012158 - Caterpillar

VPAT Bulldozer
Illustration 1 g00868324
160-0054 Tilt Cylinder (1) Torque for nut with clean grease on threads ... 3400 340 N m (2510 250 lb ft) (2) Put clean grease on the threads. Torque for the crown ... 600 130 N m (440 95 lb ft) (3) Apply 4C-4032 Sealant to the wiper seal groove prior to assembly. (4) Bore of new cylinder ... 139.7 0.08 mm (5.50 0.0031 inch) (5) Bore of new head ... 63.78 0.03 mm (2.51 0.0012 inch) (6) Diameter of new rod ... 63.45 .038 mm (2.50 0.0015 inch)Note: Use the lubricant that is being sealed in order to lubricate the sealing lips in the head.SU-Blade Bulldozer
Illustration 2 g01302375
115-3523 Tilt Cylinder (1) Torque for bolt with lubrication on threads ... 3100 350 N m (2280 260 lb ft) (2) Torque for four bolts ... 900 100 N m (660 75 lb ft) (3) Apply 4C-4032 Sealant to the wiper seal groove prior to assembly. (4) Bore of new cylinder ... 165.15 0.10 mm (6.5019 0.0039 inch) (5) Bore of new head ... 76.48 0.03 mm (3.011 0.0019 inch) (6) Diameter of new rod ... 76.15 .038 mm (2.998 0.0015 inch)Note: Use the lubricant that is being sealed in order to lubricate the sealing lips in the head.