LOCKWASHER-TOOTH 8N1523 - Caterpillar

Inspect the annunciator panel for good condition. Perform a lamp test. All of the warning lamps should illuminate. If a warning lamp does not illuminate, replace the bulb immediately. If the alarm does not sound, investigate the problem and correct the problem.Check the condition of all of the gauges. If a gauge is broken, repair the gauge or replace the gauge immediately.Frequently monitor the following parameters during normal engine operation:
Engine Oil Pressure
Engine Coolant Temperature
Inlet Air Restriction
Exhaust TemperatureRecord the data in a log. Compare the new data to the data that was previously recorded. Comparing the new data to the recorded data will establish the normal gauge readings for the engine. A gauge reading that is abnormal may indicate a problem with engine operation. Abnormal gauge readings may also indicate a possible problem with the gauge.Record the Performance of the Engine
Table 1 is offered as an example for use as a daily engine log. Record the engine performance regularly. Retain the recorded information for reference. Compare the recorded data in order to provide an indication of engine condition.Records of engine performance are an important element of a maintenance program. Record information about the engine operation on a daily basis. This will help to reveal the trends of the engine performance. Records of engine performance will also provide a baseline for evaluating the mechanical condition of the engine.The data on engine performance can help to predict problems with operation. This data can provide your Caterpillar dealer with information that is useful for recommending maintenance management information. A maintenance program that is properly managed will provide your engine with an optimum service life.
Table 1
Daily Engine Log
Date
Authorization
Engine Serial Number
Engine Hours
Engine Speed
Percent Load
Ambient Temperature
Inlet Air Restriction
Engine Coolant Temperature
Engine Oil Temperature
Engine Oil Pressure
System Battery Voltage
Exhaust Manifold Temperature
Generator Voltage
Generator Amperage
Comments