LUBRICANT GP - 4612534 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8T-3207     Lifting Bracket     1    Start By:
Remove the track roller frame. Refer to Disassembly and Assembly, "Track Roller Frame - Remove".
Illustration 1 g00866580
Illustration 2 g00866582
Illustration 3 g00866583
Attach a lifting sling to pivot bar (1). Attach the lifting sling to Tooling (A) .Note: Tooling (A) is rotated 180 degrees.
Remove mounting bolts (2) .
Use bolt (2) in hole (3) to remove pivot bar (1). The weight of pivot bar (1) is approximately 75 kg (165 lb). Remove oil seal (4) .Installation Procedure
Note: Tooling (A) is rotated 180 degrees.
Illustration 4 g00866580
Illustration 5 g00866582
Illustration 6 g00866583
Install oil seal (4) to pivot bar (1). Attach a lifting sling to pivot bar (1). Attach the lifting sling to Tooling (A). Install pivot bar (1). The weight of pivot bar (1) is approximately 75 kg (165 lb).
Install mounting bolts (2). Remove the lifting sling and Tooling (A). Tighten mounting bolts (2) to a torque of 2100 250 N m (1549 184 lb ft).End By: Install the track roller frame. Refer to Disassembly and Assembly, "Track Roller Frame - Install".