AVSPARE.COM
parts catalog

LUG 2109638 - Caterpillar


2109638 LUG Caterpillar parts ATS
Rating:
19
Alternative (cross code) number:
CA2109638
210-9638
2109638
Caterpillar 2109638 LUG
Weight: 0.01 pounds 0 kg.

Buy LUG 2109638 Caterpillar genuine, new aftermarket tractor parts with delivery
AUTOMATIC TRANS SWITCH,

Compatible equipment models: 2109638:

AUTOMATIC TRANS SWITCH  ATS   Caterpillar
Number on catalog scheme: 4
  For full view, you need register

Information:


Illustration 1 g06237141
Bucket Control
(1) Lever
(2) Lift arm assembly
(3) Tilt cylinder
(4) Bucket
(5) Link
(6) Lift cylinders (two)
(7) Lift arm position sensorThe bucket control provides a way to control the operation of bucket (4).The group is made up of the following components: two lift cylinders (6), lift arm position sensor (7), tilt cylinder (3), lift arm assembly (2), lever (1) and link (5).The placement of link (5) in the lift arm assembly is called the z-bar linkage. The Z is formed by the following components: tilt cylinder (3), lever (1) and link (5).The following components are fastened to the loader frame by pins: tilt cylinder (3), lift cylinders (6) and lift arm assembly (2).When pressure oil is sent to the head end of lift cylinders (6), lift arm assembly (2) is raised. When pressure oil flows to rod end of lift cylinders (6), lift arm assembly (2) is lowered.The bucket tilts back when pressure oil is sent to the head end of tilt cylinder (3). The bucket dumps when pressure oil flows to the rod end of the tilt cylinder.Tilt Kickout
Illustration 2 g06250894
Tilt kickout
(3) Tilt cylinder
(8) Magnet
(9) SensorThe machine ECM automatically moves the tilt control valve spool to the HOLD position when the bucket gets to the desired tilt angle.When the rod moves in tilt cylinder (3), magnet (8) travels along sensor (9). Sensor (9) is monitored by the machine ECM. When, magnet (8) reaches a specified position on sensor (9) the machine ECM will disengage the tilt kickout. The tilt kickout uses electronic snubbing so that the tilt cylinder will not stop immediately.Lift Kickout
Illustration 3 g03832974
Lift kickout
(7) Lift arm position sensorThe machine ECM automatically moves the lift control valve spool to the HOLD position when the bucket gets to the desired lift position.When, the lift arm moves position sensor (7) rotates. The sensor is monitored by the machine ECM. The sensor gets to the desired position the machine ECM will disengage the lift kickout. The lift kickout uses electronic snubbing so that the lift cylinders will not stop immediately.

Caterpillar parts catalog:

Caterpillar parts catalog
Automatic Transfer Switches CTS, CTSD Series TSG00001-00999
Automatic Transfer Switches CTG, CTGD Series TSA00001-01499


Parts lug Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.