391-1332 CYLINDER BLOCK GP-SHORT S/N DSE1-UP; SSW1-UP ALSO AN ATTACHMENT C18 GENERATOR SET

BASIC ENGINE

CYLINDER BLOCK GP

0. 391-1332 CYLINDER B

CYLINDER HEAD GP

1. 223-7263 CYLINDER H
2. 223-9250 CYLINDER H
3. 312-8590 CYLINDER H

DAMPER GP

4. 352-2818 DAMPER & P
5. 418-4508 DAMPER & P
6. 418-4514 DAMPER & P
7. 419-7231 DAMPER & P
8. 421-5638 DAMPER & P

COUPLING GP

9. 314-6211 FASTENER G
0. INFORMATION

GENERATOR SET C18 GENERATOR SET SSW
C18 Marine Generator Set SSW00001-UP M0064328 C18 SSW (2015)

BASIC ENGINE

CYLINDER BLOCK GP

384-9627 CYLINDER BLOCK GP

391-1332 CYLINDER BLOCK GP-SHORT

391-1335 JET GP-PISTON COOLING

373-6587 PLUG

234-9222 PLUG GP-CYLINDER BLOCK

#M00643280040

391-1332: CYLINDER BLOCK GP-SHORT

CYLINDER BLOCK GP-SHORT

391-1332 CYLINDER BLOCK GP-SHORT
S/N DSE1-UP; SSW1-UP
ALSO AN ATTACHMENT

i05021871 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
384-9630 Y	[1]	CRANKSHAFT GP
384-9627 Y	[1]	CYLINDER BLOCK GP
368-8185 Y	[6]	PISTON & ROD GP
Y		SEPARATE ILLUSTRATION

#M00643280041

223-7263: CYLINDER HEAD AS

CYLINDER HEAD AS

223-7263 CYLINDER HEAD AS
S/N DSE1-UP; SSW1-UP
WITH PRE-FINISHED VALVE SEAT INSERTS
PART OF 223-9250 CYLINDER HEAD GP
ALSO AN ATTACHMENT

i01877339 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	122-7375	[24]	GUIDE-VALVE (STANDARD)
	122-0447 AB		GUIDE-VALVE (0.51-MM OS)
	122-8612 AB		GUIDE-VALVE (0.13-MM OS)
2.	216-5582	[7]	BUSHING (STANDARD)
	217-0751 AB		BUSHING (0.25-MM OS)
	217-0752 AB		BUSHING (0.762-MM OS)
	261-3429 AB		BUSHING (1.778-MM OS)
	261-3430 AB		BUSHING (1.27-MM OS)
3.	280-3979	[12]	INSERT-VALVE SEAT (INLET)(STANDARD)
4.	226-5561	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
	288-4883 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
	AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
5.	263-4920	[6]	SLEEVE-INJECTOR (INLET)
8.	166-2904	[12]	SEAL-O-RING
9.	3B-0623	[17]	PLUG-CUP
10.	3B-0645	[20]	PLUG-CUP (32.08-MM OD)
11.	8T-6757	[3]	PLUG-PIPE
12.	9X-7430	[6]	SEAL-O-RING
13.	493-9591	[1]	HEAD-CYLINDER
	448-3297	[1]	HEAD-CYLINDER
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED

#M00643280042

223-9250: CYLINDER HEAD GP

CYLINDER HEAD GP

223-9250 CYLINDER HEAD GP
S/N DSE1-UP; SSW1-UP
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 312-8590 CYLINDER HEAD GP
ALSO AN ATTACHMENT

i02462290 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-4429	[48]	LOCK-RETAINER
2.	6I-0928	[24]	WASHER-SPECIAL
3.	490-7198	[12]	VALVE-INLET
4.	490-7200	[12]	VALVE-EXHAUST
5.	163-2478	[24]	SEAL-VALVE STEM
6.	247-9908	[24]	SPRING-VALVE (OUTER)
7.	223-7263 CY	[1]	CYLINDER HEAD AS
8.	186-2001	[24]	ROTOCOIL AS
9.	211-3122	[24]	SPRING-VALVE (INNER)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#M00643280043

312-8590: CYLINDER HEAD GP

CYLINDER HEAD GP

312-8590 CYLINDER HEAD GP
S/N DSE1-UP; SSW1-UP
ALSO AN ATTACHMENT

i02799489 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-6772	[24]	SEAL (WATER)
2.	6I-4025	[16]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
2A.	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
2B.	124-1855	[1]	BOLT-12 POINT HEAD (3/4-16X7.638-IN)
3.	106-5673	[10]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
3A.	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
3B.	124-1854	[1]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
4.	223-9250 Y	[1]	CYLINDER HEAD GP
5.	183-3407	[3]	PLUG AS
			(EACH INCLUDES)
5A.	214-7568	[1]	SEAL-O-RING
5B.	9S-8004	[1]	PLUG (9/16-18-THD)
6.	224-5122	[1]	GASKET (CYLINDER HEAD)
7.	5P-0840	[1]	SEAL-O-RING
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#M00643280044

352-2818: DAMPER & PULLEY GP

DAMPER & PULLEY GP

352-2818 DAMPER & PULLEY GP
S/N SSW1-UP
AN ATTACHMENT

i04970514 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-7787	[1]	ADAPTER-DAMPER
2.	213-3199	[1]	DAMPER AS
3.	345-8401	[1]	PULLEY (8-GROOVE)
4.	131-7880	[6]	BOLT (5/8-18X5.5-IN)
5.	1F-7958	[12]	NUT-FULL (1/2-13-THD)
6.	3D-0490	[12]	STUD-TAPERLOCK (1/2-13X1.97-IN)
7.	3H-7654	[12]	WASHER-HARD (13.5X22.5X3-MM THK)

#M00643280045

418-4508: DAMPER & PULLEY GP

DAMPER & PULLEY GP

418-4508 DAMPER & PULLEY GP
S/N SSW1-UP
FOR USE WITH HIGH HORSEPOWER ENGINES
AN ATTACHMENT

i05071652 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-7787	[1]	ADAPTER-DAMPER
2.	167-8130	[2]	DAMPER AS
3.	6N-7654	[1]	SPACER (6.312X8.18X0.312-IN THK)
4.	418-4510	[1]	PULLEY-CRANKSHAFT (8-GROOVE)
5.	420-4441	[1]	SHAFT-STUB
6.	131-7880	[6]	BOLT (5/8-18X5.5-IN)
7.	1F-7958	[12]	NUT-FULL (1/2-13-THD)
8.	3H-7654	[12]	WASHER-HARD (13.5X22.5X3-MM THK)
9.	8T-7061	[12]	STUD (1/2-13X5.5-IN)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#M00643280046

418-4514: DAMPER & PULLEY GP

DAMPER & PULLEY GP

418-4514 DAMPER & PULLEY GP
S/N SSW1-UP
8-GROOVE
FOR USE WITH 803 HP AUX/GENSET RATING
AN ATTACHMENT

i05109958 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-7787	[1]	ADAPTER-DAMPER
2.	167-8130	[2]	DAMPER AS
3.	6N-7654	[1]	SPACER (6.312X8.18X0.312-IN THK)
4.	418-4510	[1]	PULLEY-CRANKSHAFT (8-GROOVE)
5.	8T-7061	[12]	STUD (1/2-13X5.5-IN)
6.	131-7880	[6]	BOLT (5/8-18X5.5-IN)
7.	1F-7958	[12]	NUT-FULL (1/2-13-THD)
8.	3H-7654	[12]	WASHER-HARD (13.5X22.5X3-MM THK)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#M00643280047

419-7231: DAMPER & PULLEY GP

DAMPER & PULLEY GP

419-7231 DAMPER & PULLEY GP
S/N SSW1-UP
FOR USE WITH 803 HP AUX/GEN ENGINES
AN ATTACHMENT

i05115552 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-7787	[1]	ADAPTER-DAMPER
2.	167-8130	[2]	DAMPER AS
3.	6N-7654	[1]	SPACER (6.312X8.18X0.312-IN THK)
4.	355-3671	[1]	PULLEY (4-GROOVE)
5.	418-4510	[1]	PULLEY-CRANKSHAFT (8-GROOVE)
6.	0S-1587	[8]	BOLT (1/2-13X1.75-IN)
7.	8T-7061	[12]	STUD (1/2-13X5.5-IN)
8.	131-7880	[6]	BOLT (5/8-18X5.5-IN)
9.	1F-7958	[12]	NUT-FULL (1/2-13-THD)
10.	3H-7654	[12]	WASHER-HARD (13.5X22.5X3-MM THK)
11.	5P-8245	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#M00643280048

421-5638: DAMPER & PULLEY GP

DAMPER & PULLEY GP

421-5638 DAMPER & PULLEY GP
S/N SSW1-UP
PROVIDES STUB SHAFT POWER TAKE OFF OPTION
CANNOT BE USED WITH 803 HORSE POWER RATINGS
AN ATTACHMENT

i05066269 M0064328

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-7787	[1]	ADAPTER-DAMPER
2.	213-3199	[1]	DAMPER AS
3.	418-4510	[1]	PULLEY-CRANKSHAFT (8-GROOVE)
4.	420-4441	[1]	SHAFT-STUB
5.	131-7880	[6]	BOLT (5/8-18X5.5-IN)
6.	1F-7958	[12]	NUT-FULL (1/2-13-THD)
7.	315-5008	[12]	STUD-TAPERLOCK
8.	3H-7654	[12]	WASHER-HARD (13.5X22.5X3-MM THK)
9.	6N-7654	[1]	SPACER (6.312X8.18X0.312-IN THK)

#M00643280049

314-6211: FASTENER GP-COUPLING

FASTENER GP-COUPLING

314-6211 FASTENER GP-COUPLING
S/N SSW1-UP
AN ATTACHMENT

i02787607 M0064328

3146211 FASTENER GP-COUPLING Parts scheme

For full view, you need register

Parts for your C18 GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-2424	[14]	BOLT (1/2-13X2.25-IN)
2.	5P-2566	[2]	BOLT (1/2-13X1.5-IN)
3.	8T-4122	[6]	WASHER-HARD (17X32X3.5-MM THK)
4.	8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
5.	6C-3244	[6]	BOLT (5/8-11X3.25-IN)