AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

126-1372 CYLINDER BLOCK AS S/N DPZ1-UP PART OF 126-1375 CYLINDER BLOCK AS 3412 GENERATOR SET


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP
DAMPER GP
DRIVE GP-FAN

GENERATOR SET 3412 GENERATOR SET DK6
 3412 Generator Set DK600001-UP M0064370 3412 DK6   (2014)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
486-0874 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK AS
126-1372 CYLINDER BLOCK AS
CYLINDER BLOCK AS
126-1375 CYLINDER BLOCK AS
CYLINDER BLOCK GP
7E-3762 CYLINDER BLOCK GP
PLUG GP-CYLINDER BLOCK
483-3773 PLUG GP-CYLINDER BLOCK
PLUG GP-CYLINDER BLOCK
483-3774 PLUG GP-CYLINDER BLOCK
 

#M00643700020
 

126-1372: CYLINDER BLOCK AS

126-1372 CYLINDER BLOCK AS
S/N DPZ1-UP
PART OF 126-1375 CYLINDER BLOCK AS
i01083742 M0064370
1261372 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3412 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
2. 485-1966 [7] CAP-CRANKSHAFT  
3. 4N-6658 [2] BUSHING (1.3-IN WIDE)  
4. 4N-0685 [5] BUSHING (1-IN WIDE)  
5. 7W-6492 [2] PLUG-PIPE (1/2-14-THD)  
6. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
   
  4W-4588 AFJN SLEEVE-LIFTER BORE  
  4W-6061 AFLN SLEEVE  
  2W-3815 AFJN INSERT-LINER SEAT (1.605-MM THK)  
  6I-4363 AFJN INSERT-LINER SEAT (1.555-MM THK)  
  6I-4364 AFJN INSERT-LINER SEAT (1.655-MM THK)  
  5N-0093 AFJN INSERT-LINER SEAT (2.71-MM THK)  
  6I-4365 AFJN INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 AFJN INSERT-LINER SEAT (2.76-MM THK)  
  9Y-3368 AFJN INSERT-LINER SEAT (0.822-MM THK)  
  6I-4361 AFJN INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 AFJN INSERT-LINER SEAT (0.872-MM THK)  
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  J   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
  L   FOR SALVAGE OF THE BOTTOM LINER O-RING BORE
  N   QUANTITY TO BE DETERMINED BY USER
 

#M00643700021
 

126-1375: CYLINDER BLOCK AS

126-1375 CYLINDER BLOCK AS
S/N DPZ1-UP
PART OF 7E-3762 CYLINDER BLOCK GP
i00896759 M0064370
1261375 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3412 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-1372 Y [1] CYLINDER BLOCK AS  
2. 9L-5854 [12] BAND-FILLER (130.2-MM ID)  
3. 197-9322 [12] LINER-CYLINDER BLOCK  
4. 110-2220 [12] SEAL-LINER  
5. 142-7072 [12] SEAL-LINER  
6. 142-6217 [12] SEAL-O-RING  
  4W-4588 ABFJ SLEEVE-LIFTER BORE  
  4W-6061 ABFL SLEEVE  
  2W-3815 ABFJ INSERT-LINER SEAT (1.605-MM THK)  
  5N-0093 ABFJ INSERT-LINER SEAT (2.71-MM THK)  
  9Y-3368 ABFJ INSERT-LINER SEAT (0.822-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  J   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
  L   FOR SALVAGE OF THE BOTTOM LINER O-RING BORE
  Y   SEPARATE ILLUSTRATION
 

#M00643700022
 

7E-3762: CYLINDER BLOCK GP

7E-3762 CYLINDER BLOCK GP
S/N DPZ1-UP
i00988391 M0064370
7E3762 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3412 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-1375 Y [1] CYLINDER BLOCK AS  
2. 4N-1650 [4] DOWEL  
3. 8T-6763 [4] PLUG-PIPE (1/4-18-THD)  
4. 8T-6757 [5] PLUG-PIPE (MARKED Y)  
5. 225-3101 [2] GASKET-PLATE  
6. 225-3100 [2] PLATE-SPACER  
7. 7C-9614 [3] PLUG-TAPERLOCK (1-5/8-12-THD)  
8. 4N-0683 [4] DOWEL  
10. 3B-0645 [1] PLUG-CUP (32.08-MM OD)  
11. 6L-4428 [3] STUD-TAPERLOCK (3/8-16X4.01-IN)(MARKED X)  
12. 7C-7407 [1] STUD  
14. 5P-8356 [4] SEAL-O-RING  
15. 3S-6605 [2] PLUG-CUP  
  Y   SEPARATE ILLUSTRATION
 

#M00643700023
 

143-0046: CYLINDER HEAD AS

143-0046 CYLINDER HEAD AS
S/N DPZ1-UP
PART OF 143-0047 CYLINDER HEAD AS
FIELD REPLACEMENT ORDER @@@@@143-0047@@@@@
i01267621 M0064370
1430046 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3412 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [10] PLUG-CUP (32.08-MM OD)  
2. 4N-5893 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 3B-0623 [12] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#M00643700024
 

143-0047: CYLINDER HEAD AS

143-0047 CYLINDER HEAD AS
S/N DPZ1-UP
PART OF 141-3228 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@143-0046@@@@@
i02194598 M0064370
1430047 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3412 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0046 Y [1] CYLINDER HEAD AS  
2. 173-7188 [24] GUIDE-VALVE  
  Y   SEPARATE ILLUSTRATION
 

#M00643700025
 

141-3228: CYLINDER HEAD GP

141-3228 CYLINDER HEAD GP
S/N DPZ1-UP
PART OF 4P-2153, 9Y-8510 CYLINDER HEAD GP
i00990619 M0064370
1413228 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0047 Y [1] CYLINDER HEAD AS  
2. 122-0322 [12] VALVE-INLET  
3. 2A-4429 [48] LOCK-RETAINER  
4. 6N-7175 [24] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
5. 4N-5906 [24] SPRING-VALVE  
6. 122-0321 [12] VALVE-EXHAUST  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#M00643700026
 

4P-2153: CYLINDER HEAD GP

4P-2153 CYLINDER HEAD GP
S/N DPZ1-UP
i00988378 M0064370
4P2153 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-3228 YC [2] CYLINDER HEAD GP  
2. 4N-0932 [2] PLUG-CUP (57.53-MM OD)  
3. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 225-3099 [2] GASKET-CYLINDER HEAD  
5. 0L-1352 [14] BOLT (3/8-16X3.25-IN)  
6. 8T-6764 [2] PLUG-PIPE (1/8-27-THD)  
7. 6N-6547 [1] SUPPORT (TIMING GEAR)  
8. 7W-8301 [40] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
8A. 5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
9. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
10. 3E-6772 [48] SEAL (WATER)  
11. 100-6920 [12] ADAPTER-NOZZLE  
12. 8M-5249 [12] SEAL-O-RING  
13. 123-3292 [12] GASKET  
14. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
16. 7E-0039 [1] BRACKET  
17. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
18. 5P-0063 [4] PLUG-CUP  
19. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
20. 0T-0055 [2] BOLT (3/8-16X4.25-IN)  
21. 6N-6546 [1] SUPPORT (TIMING GEAR)  
22. 8T-6762 [6] PLUG-PIPE (1/2-14-THD)  
23. 9Y-7128 [1] BRACKET  
24. 8S-9191 [4] BOLT (3/8-16X4-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#M00643700027
 

9Y-8510: CYLINDER HEAD GP

9Y-8510 CYLINDER HEAD GP
S/N DPZ1-UP
i00990613 M0064370
9Y8510 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-3228 Y [2] CYLINDER HEAD GP  
2. 4N-0932 [2] PLUG-CUP (57.53-MM OD)  
3. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 225-3099 [2] GASKET-CYLINDER HEAD  
5. 0L-1352 [14] BOLT (3/8-16X3.25-IN)  
6. 8T-6764 [2] PLUG-PIPE (1/8-27-THD)  
7. 6N-6547 [1] SUPPORT (TIMING GEAR)  
8. 7W-8301 [40] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
10. 359-1439 [48] SEAL AS-WATER  
11. 100-6920 [12] ADAPTER-NOZZLE  
12. 7L-4774 [12] SEAL-O-RING  
13. 4N-7253 [12] GASKET-CHAMBER  
14. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
15. 7E-0039 [1] BRACKET  
16. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
17. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
18. 5P-0063 B [4] PLUG-CUP  
19. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
20. 0T-0055 [2] BOLT (3/8-16X4.25-IN)  
21. 6N-6546 [1] SUPPORT (TIMING GEAR)  
22. 8T-6762 [6] PLUG-PIPE (1/2-14-THD)  
23. 9Y-7128 [1] BRACKET  
24. 8S-9191 [4] BOLT (3/8-16X4-IN)  
25. 0L-1352 B [4] BOLT (3/8-16X3.25-IN)  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#M00643700028
 

7W-2365: DAMPER & PULLEY GP

7W-2365 DAMPER & PULLEY GP
S/N DPZ1-UP
i00988402 M0064370
7W2365 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
2. 3N-9540 [1] PULLEY (1-GROOVE)  
3. 6N-7785 [1] PULLEY (5-GROOVE)  
    -OR-
  6N-7786 A [1] PULLEY (6-GROOVE)(6 GROOVES)  
4. 2D-8155 [12] STUD-TAPERLOCK (1/2-13X3.58-IN)  
  1F-7958 [12] NUT-FULL (1/2-13-THD)  
5. 167-8131 [1] DAMPER AS  
6. 6N-7787 [1] ADAPTER-DAMPER  
  A   NOT PART OF THIS GROUP
 

#M00643700029
 

153-5104: DRIVE GP-FAN

153-5104 DRIVE GP-FAN
S/N DPZ1-UP
i00738595 M0064370
1535104 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3412 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-8828 [1] PULLEY-FAN DRIVE (4-GROOVE)  
2. 4N-3123 [1] ADAPTER-FAN  
3. 1F-7960 [4] WASHER (13.5X32X6-MM THK)  
4. 6N-7688 [1] BRACKET AS-FAN  
4A. 1P-9946 [1] SHAFT-FAN  
4B. 4N-0684 [1] DOWEL  
5. 8H-9789 [1] BALL BEARING  
6. 2D-4867 [1] FITTING-GREASE (1/8-27 PTF)(FAN DRIVE)  
7. 9F-4446 [1] SEAL-O-RING  
8. 3L-1425 [1] BALL BEARING  
9. 7N-2900 [1] RETAINER  
10. 5P-7979 [2] BOLT-LOCKING (5/16-24X2.25-IN)  
11. 8N-5305 [1] SPACER (35.6X47.62X43.74-MM THK)  
12. 7N-8827 [1] HUB  
13. 0L-2070 [6] BOLT (3/8-16X2.25-IN)  
14. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
15. 6N-2547 [1] ADAPTER-FAN BRACKET  
16. 9L-4238 [1] BOLT (3/8-16X8.5-IN)  
17. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
18. 0S-1594 [2] BOLT (3/8-16X1-IN)  
19. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 153-5625 [1] V-BELT SET (INCLUDES 4-BELTS)(FAN DRIVE)  
21. 5S-2106 [1] SEAL-LIP TYPE  
22. 4B-4550 [1] FITTING-PRESSURE RELIEF (1/8-27 PTF)  
23. 6N-2538 [1] BRACKET-FAN ADJUSTMENT  
24. 9L-0553 [4] STUD-TAPERLOCK  
25. 1D-4719 [4] NUT-FULL (1/2-13-THD)  
 

Information:

Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Fuel Injection Lines
3412 Generator Set Engines
Cylinder Block
3412 Generator Set Engines
Cylinder Liner
3412 Generator Set Engines
Main Bearing Journal
3412 Generator Set Engines
Fuel Injection Lines
3412 Generator Set Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Caterpillar Parts SIS Catalog 3412 :

CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
CRANKSHAFT AS
384-9906 CRANKSHAFT AS
COVER GP-VALVE MECHANISM
464-6645 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
464-6644 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
469-0234 COVER GP-FRONT HOUSING
COVER GP-ENGINE LIFTING EYE
144-7184 COVER GP-ENGINE LIFTING EYE
COVER GP-CYLINDER BLOCK
486-0874 COVER GP-CYLINDER BLOCK
COVER GP-ACCESS
483-3785 COVER GP-ACCESS
CYLINDER BLOCK AS
126-1375 CYLINDER BLOCK AS
CYLINDER BLOCK GP
7E-3762 CYLINDER BLOCK GP
CYLINDER HEAD AS
143-0046 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS
CYLINDER HEAD GP
141-3228 CYLINDER HEAD GP
CYLINDER HEAD GP
4P-2153 CYLINDER HEAD GP
CYLINDER HEAD GP
9Y-8510 CYLINDER HEAD GP
DAMPER & PULLEY GP
7W-2365 DAMPER & PULLEY GP

Truck sale:

Caterpillar 3412, mobile generator sets, Construction
95,720 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
96,795 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, mobile generator sets, Construction
93,569 
Caterpillar 3412, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3412, Stationary Generator Sets, Construction
60,000 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3412, Stationary Generator Sets, Construction
159,600 
Caterpillar 3412, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.