AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

385-2831 CYLINDER & SEAL GP-STICK S/N DJE1-UP 120-MM (4.7-IN) BORE X 1197-MM (47.1-IN) STROKE PART OF 385-2829, 393-6350 CYLINDER & LINES GP-STICK 313F L


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP

EXCAVATOR 313F L EXCAVATOR DJE
 313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine M0064482 313F L DJE   (2016)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & SEAL GP-BUCKET
368-7046 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
385-2834 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-STICK
385-2831 CYLINDER & SEAL GP-STICK
385-2824 CYLINDER AR-BOOM
393-6344 CYLINDER AR-BOOM
CYLINDER GP-BUCKET
368-7047 CYLINDER GP-BUCKET
 

#M00644820500
 

385-2831: CYLINDER & SEAL GP-STICK

385-2831 CYLINDER & SEAL GP-STICK
S/N DJE1-UP
120-MM (4.7-IN) BORE X 1197-MM (47.1-IN) STROKE
PART OF 385-2829, 393-6350 CYLINDER & LINES GP-STICK
i04888771 M0064482
3852831 CYLINDER & SEAL GP-STICK Parts scheme
  For full view, you need register

Parts for your 313F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 390-4202 [1] CYLINDER AS-STICK  
1A. 229-1093 [1] BUSHING  
2. 390-4203 [1] ROD AS  
2A. 229-1093 [1] BUSHING  
3. 390-4204 [1] HEAD  
4. 385-2900 [1] BUSHING  
5. 385-2899 [1] RING-RETAINING  
6. 390-4207 [1] STOP  
7. 390-4208 [1] PISTON  
8. 385-2905 [1] RING-SNAP  
9. 385-2922 [1] BALL  
10. 422-9120 [1] SETSCREW-HEX SOCKET  
11. 385-2910 [1] RING-RETAINING  
12. 385-2920 [1] RING-RETAINING  
13. 390-4215 [1] STOP  
14. 095-0703 M [12] BOLT-SOCKET HEAD (M16X2X75-MM)  
15. 166-1492 [4] SEAL-LIP TYPE  
16. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
17. 8T-6763 [1] PLUG-PIPE (1/4-18-THD)  
18. 416-1284 J [1] SEAL-WIPER  
19. 416-1285 J [1] SEAL-U-CUP  
20. 416-1287 J [1] SEAL-BUFFER  
21. 416-1286 J [1] RING-BACKUP  
22. 416-1288 J [1] SEAL-O-RING  
23. 416-1289 J [1] RING-BACKUP  
24. 416-1291 J [1] SEAL AS  
25. 416-1290 J [2] RING-WEAR  
26. 416-1292 J [2] RING-WEAR  
27. 416-1293 J [1] RING-SEAL  
28. 416-1294 J [1] RING-SEAL  
   
    AVAILABLE REPAIR KIT(S):
  393-7949 J KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#M00644820501
 

385-2824: CYLINDER AR-BOOM

385-2824 CYLINDER AR-BOOM
S/N DJE1-UP
PART OF 457-1776, 457-1778 OPTION AR-LINKAGE
i05025796 M0064482
  For full view, you need register

Parts for your 313F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  385-2825 Y [1] CYLINDER & LINES GP-BOOM (LH)  
  385-2826 Y [1] CYLINDER & LINES GP-BOOM (RH)  
  Y   SEPARATE ILLUSTRATION
 

#M00644820502
 

393-6344: CYLINDER AR-BOOM

393-6344 CYLINDER AR-BOOM
S/N DJE1-UP
PART OF 457-1777 OPTION AR-LINKAGE
i05397341 M0064482
  For full view, you need register

Parts for your 313F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  422-9164 Y [1] CYLINDER & LINES GP-BOOM (RH)  
  393-6345 Y [1] CYLINDER & LINES GP-BOOM (LH)  
  Y   SEPARATE ILLUSTRATION
 

#M00644820503
 

368-7047: CYLINDER GP-BUCKET

368-7047 CYLINDER GP-BUCKET
S/N DJE1-UP
100-MM (3.9-IN) BORE X 939-MM (37-IN) STROKE
PART OF 368-7046 CYLINDER & SEAL GP-BUCKET
i04581774 M0064482
3687047 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 313F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-8737 [1] PLUG-SEAL  
3. 099-0600 [1] RING  
4. 102-2244 [1] GROMMET  
5. 165-9283 J [1] SEAL-LIP TYPE  
6. 212-0907 [1] PLATE-CONNECTOR  
7. 217-3312 [1] MAGNET  
8. 217-8763 [1] COVER-PROTECTION  
9. 246-9113 [1] RETAINER  
10. 289-7702 [1] HEAD  
11. 295-2534 [1] SENSOR AS-POSITION (BUCKET)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
12. 349-4116 J [1] SEAL-BUFFER  
13. 368-7048 [1] CYLINDER AS  
13A. 095-0879 [1] PIN-SPRING  
13B. 355-2203 [1] BUSHING  
14. 368-7053 [1] ROD AS  
14A. 248-7857 [1] BUSHING  
15. 368-7055 [1] PISTON  
16. 093-1519 J [1] RING-BACKUP  
17. 095-1267 M [2] SETSCREW-SOCKET (M10X1.5-THD)  
18. 095-1713 J [1] SEAL-O-RING  
19. 099-5399 J [1] RING-BACKUP  
20. 099-5400 [1] RING-RETAINING  
21. 114-0753 [1] BUSHING  
22. 143-8025 J [2] RING  
23. 188-2199 [1] SEAL-O-RING  
24. 215-1942 [1] RING-BACKUP  
25. 283-5953 J [2] RING  
26. 349-4118 J [1] SEAL-U-CUP  
28. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
29. 6V-8223 M [1] SETSCREW-SOCKET (M10X1.5X16-MM)  
30. 6V-8467 J [1] SEAL-O-RING  
31. 8T-8894 M [2] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
32. 9X-7298 J [1] SEAL AS  
33. 9X-1386 E SLEEVE (9-CM)  
33A. 9X-1386 E SLEEVE (7-CM)  
   
    AVAILABLE REPAIR KIT(S):
  349-4121 J [1] KIT-SEAL (BUCKET CYLINDER)  
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#M00644820504
 

484-2102: CYLINDER GP-BUCKET

484-2102 CYLINDER GP-BUCKET -LH
S/N DJE1-UP
70-MM (28-IN) BORE X 167.3-MM (6.6-IN) STROKE
PART OF 482-0862, 484-0197 BUCKET GP-DITCH CLEANING
i06296640 M0064482
4842102 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 313F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 324-0496 [1] HEAD AS  
2A. 323-2465 J [1] BUSHING  
2B. 338-2412 J [1] SEAL-WIPER  
2C. 338-2442 J [1] SEAL-U-CUP  
2D. 340-9308 J [1] SEAL-O-RING  
  324-0442 [1] CYLINDER HEAD  
3. 324-0498 [1] PISTON AS  
3A. 161-7145 J [1] SEAL-PISTON  
3B. 340-6272 J [2] RING-WEAR  
3C. 340-9311 J [1] SEAL-O-RING  
  324-0497 [1] PISTON  
4. 350-3842 M [2] SETSCREW (M8X1.25X12.3-MM)  
5. 484-2093 [1] CYLINDER AS-TILT  
5A. [1] BUSHING  
6. 484-2094 [1] ROD AS  
6A. [1] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  324-0355 J [1] KIT-SEAL (STEERING CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#M00644820505
 

484-2103: CYLINDER GP-BUCKET

484-2103 CYLINDER GP-BUCKET -RH
S/N DJE1-UP
70-MM (28-IN) BORE X 167.3-MM (6.6-IN) STROKE
PART OF 482-0862, 484-0197 BUCKET GP-DITCH CLEANING
i06296644 M0064482
4842103 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 313F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 494-4313 JY [1] HEAD GP-HYDRAULIC CYLINDER  
3. 324-0498 [1] PISTON AS  
3A. 161-7145 J [1] SEAL-PISTON  
3B. 340-6272 J [2] RING-WEAR  
3C. 340-9311 J [1] SEAL-O-RING  
  324-0497 [1] PISTON  
4. 350-3842 M [2] SETSCREW (M8X1.25X12.3-MM)  
5. 484-2094 [1] ROD AS  
5A. [1] BUSHING  
6. 484-2104 [1] CYLINDER AS-TILT  
6A. [1] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  501-6692 J [1] KIT-HYD CYLINDER SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00644820506
 

395-4045: CYLINDER GP-COUPLER

395-4045 CYLINDER GP-COUPLER -312-LINKAGE
S/N DJE1-UP
44.5-MM (1.75-IN) BORE X 124.5-MM (4.9-IN) STROKE
PART OF 388-6156 COUPLER GP-QUICK
i05849983 M0064482
3954045 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 313F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 237-0947 J [1] VALVE GP-CHECK (PILOT OPERATED)(QUICK COUPLER)  
2. 3J-1907 [1] SEAL-O-RING  
3. 3J-7354 [1] SEAL-O-RING  
4. 9S-8002 [1] PLUG (7/16-20-THD)  
5. 9S-8004 [1] PLUG (9/16-18-THD)  
6. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
   
    AVAILABLE REPAIR KIT(S):
  453-6525 [1] KIT-PACKING (COUPLER CYLINDER)  
    (INCLUDES O-RINGS, BACK-UP RINGS, DUST SEAL, BP SEAL & POLYPAK SEAL)
  213-8433 J [1] KIT-SEAL (CHECK VALVE)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#M00644820507
 

425-7084: DRIVE & MTG GP-SWING

425-7084 DRIVE & MTG GP-SWING
S/N DJE1-UP
PART OF 427-9706 DRIVE AR-SWING
i06145792 M0064482
4257084 DRIVE & MTG GP-SWING Parts scheme
  For full view, you need register

Parts for your 313F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-1374 [1] SUPPORT  
2. 352-7064 [2] CAP  
3. 424-0520 Y [1] DRIVE GP-SWING  
4. 191-2543 [2] PIN  
5. 5D-1026 [1] CLAMP-BAND  
6. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
8. 461-3872 M [14] BOLT (M16X2X50-MM)  
9. 481-3909 [14] WASHER-HARD (17.5X30X5-MM THK)  
10. 5P-0767 E HOSE (62-CM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00644820508
 

427-9706: DRIVE AR-SWING

427-9706 DRIVE AR-SWING
S/N DJE1-UP
FINE SWING
PART OF 483-7752, 483-7753, 483-7754, 492-2950, 492-2951, 510-1039, 510-1041, 510-1042, 510-1043, 510-1044, 565-3833, 565-3834, 565-3838, 565-3840, 565-3842 DISTRIBUTION AR
i06145788 M0064482
  For full view, you need register

Parts for your 313F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  425-7084 Y [1] DRIVE & MTG GP-SWING  
  428-8256 Y [1] LINES GP-SWING MOTOR  
  350-8400 Y [1] SWITCH GP-ROCKER (FINE SWING)  
  350-8161 Y [1] WIRING GP-FINE SWING  
  Y   SEPARATE ILLUSTRATION
 

#M00644820509
 

422-1346: DRIVE GP-SWING

422-1346 DRIVE GP-SWING
S/N DJE1-UP
WITH MOTOR
PART OF 424-0520 DRIVE GP-SWING
i06701224 M0064482
4221346 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 313F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 467-4412 CY [1] DRIVE GP-SWING (WITHOUT MOTOR)  
2. 422-9183 Y [1] MOTOR GP-PISTON  
3. 6V-7644 [1] RING-RETAINING  
4. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 8T-5041 M [12] BOLT (M12X1.75X120-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Cylinder Guard
312F and 313F Excavator Machine System Specifications
Blade Lift Cylinder
312F and 313F Excavator Machine System Specifications
Boom Cylinder Lines
312F and 313F Excavator Machine System Specifications
Boom Cylinder Lines
312F and 313F Excavator Machine System Specifications
Boom Cylinder
312F and 313F Excavator Machine System Specifications
Stick Cylinder
312F and 313F Excavator Machine System Specifications
Bucket Cylinder
312F and 313F Excavator Machine System Specifications
Boom Lines
312F and 313F Excavator Machine System Specifications
Bucket Cylinder
312F and 313F Excavator Machine System Specifications
Boom Cylinder Lines
312F and 313F Excavator Machine System Specifications
Boom Cylinder Lines
312F and 313F Excavator Machine System Specifications
Systems Operation
Blade Hydraulic System
312F and 313F Excavator Machine Systems
Blade Hydraulic System
312F and 313F Excavator Machine Systems
Boom Cylinder
312F and 313F Excavator Machine Systems
Stick Cylinder
312F and 313F Excavator Machine Systems
Bucket Cylinder
312F and 313F Excavator Machine Systems
Blade Cylinder
312F and 313F Excavator Machine Systems
Blade Hydraulic System
312F and 313F Excavator Machine Systems
Blade Hydraulic System
312F and 313F Excavator Machine Systems
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
312F and 313F Excavator Machine Systems
Cylinder Drift - Check - Loaded Bucket
312F and 313F Excavator Machine Systems
Cylinder Speed - Check
312F and 313F Excavator Machine Systems
Cylinder Drift - Check - Blade (If Equipped)
312F and 313F Excavator Machine Systems
Cylinder Speed - Check - Blade (If Equipped)
312F and 313F Excavator Machine Systems
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Cylinder
312F, 313F, 313F L Excavator Machine Systems
Boom Cylinder
312F, 313F, 313F L Excavator Machine Systems
Load Control Valve (Stick Cylinder)
312F, 313F, 313F L Excavator Machine Systems
Stick Cylinder
312F, 313F, 313F L Excavator Machine Systems
Boom Cylinder - Lines
312F, 313F, 313F L Excavator Machine Systems
Stick Cylinder - Stick Lowering Control Valve
312F, 313F, 313F L Excavator Machine Systems
Stick Cylinder - Lines
312F, 313F, 313F L Excavator Machine Systems
Bucket Cylinder - Lines
312F, 313F, 313F L Excavator Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

Caterpillar Parts SIS Catalog 313F L :

CYLINDER & SEAL GP-BUCKET
385-2834 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
368-7046 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BOOM
385-2828 CYLINDER & SEAL GP-BOOM
CYLINDER & SEAL GP-BLADE
385-2887 CYLINDER & SEAL GP-BLADE
CYLINDER & SEAL GP-BLADE
385-2886 CYLINDER & SEAL GP-BLADE
393-6350 CYLINDER & LINES GP-STICK
385-2829 CYLINDER & LINES GP-STICK
385-2832 CYLINDER & LINES GP-BUCKET
385-2824 CYLINDER AR-BOOM
393-6344 CYLINDER AR-BOOM
CYLINDER GP-BUCKET
368-7047 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
484-2102 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
484-2103 CYLINDER GP-BUCKET
CYLINDER GP-COUPLER
395-4045 CYLINDER GP-COUPLER
DRIVE & MTG GP-SWING
425-7084 DRIVE & MTG GP-SWING
427-9706 DRIVE AR-SWING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.