AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

484-8213 WIPER GP-WINDOW S/N JTR1-UP PART OF 418-9377, 435-7611 CAB GP AN ATTACHMENT D6K2 LGP TRACK-TYPE TRACTOR


OPERATOR STATION
WIPER GP-WINDOW
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
BLADE GP
WINCH GP
GROUND ENGAGING TOOLS (G.E.T.)

TRACK-TYPE TRACTOR D6K2 LGP TRACK-TYPE TRACTOR JTR
 D6K2 LGP Track-Type Tractor JTR00001-UP (MACHINE) POWERED BY C4.4 Engine M0064782 D6K2 LGP JTR   (2016)

OPERATOR STATION

WIPER GP-WINDOW
MOTOR GP-WINDOW WIPER
304-4243 MOTOR GP-WINDOW WIPER
MOTOR GP-WINDOW WIPER
304-4244 MOTOR GP-WINDOW WIPER
MOTOR GP-WINDOW WIPER
330-5023 MOTOR GP-WINDOW WIPER
MOTOR GP-WINDOW WIPER
469-4657 MOTOR GP-WINDOW WIPER
WIPER GP-WINDOW
484-8213 WIPER GP-WINDOW
 

#M00647820760
 

484-8213: WIPER GP-WINDOW

484-8213 WIPER GP-WINDOW
S/N JTR1-UP
PART OF 418-9377, 435-7611 CAB GP
AN ATTACHMENT
i06517596 M0064782
4848213 WIPER GP-WINDOW Parts scheme
  For full view, you need register

Parts for your D6K2 LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-8811 [1] BLADE AS-WIPER (500-MM)(FRONT)  
2. 8T-5400 [2] CONNECTOR  
3. 146-6433 [1] BLADE AS-WIPER (500-MM)(REAR)  
4. 263-2135 [1] ARM GP-WINDOW WIPER (FRONT)  
  136-3191 [1] NOZZLE AS-WASHER  
  240-8666 [2] CLIP  
  194-5171 E HOSE (60-CM)  
5. 266-3701 [1] ARM GP-WINDOW WIPER (REAR)  
  305-9192 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (50-CM)  
6. 330-5023 Y [1] MOTOR GP-WINDOW WIPER (REAR)  
7. 469-4657 Y [1] MOTOR GP-WINDOW WIPER (FRONT)(FRONT)  
8. 3S-2093 [1] STRAP-CABLE  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#M00647820761
 

462-4828: BIT-END

462-4828 BIT-END -RH
S/N JTR1-UP
FIELD INSTALLATION
i07048909 M0064782
4624828 BIT-END Parts scheme
  For full view, you need register

Parts for your D6K2 LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#M00647820762
 

462-4829: BIT-END

462-4829 BIT-END -LH
S/N JTR1-UP
FIELD INSTALLATION
i07048883 M0064782
4624829 BIT-END Parts scheme
  For full view, you need register

Parts for your D6K2 LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#M00647820763
 

483-9320: BLADE & EDGE GP-ANGLING

483-9320 BLADE & EDGE GP-ANGLING
S/N FD61-UP
PART OF 494-1763 OPTION AR-WORK TOOL
Type 1
AN ATTACHMENT
i06536636 M0064782
4839320 BLADE & EDGE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6K2 LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 8D-3791 [3] PIN  
4. 089-8249 [2] SPACER (64X72X13-MM THK)  
5. 104-4817 [1] PIN  
6. 223-3279 [1] RETAINER  
7. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER  
8. 358-2194 [3] PIN  
9. 358-2260 [1] ARM AS-SUPPORT  
10. 359-3371 [4] SPACER (50X58X16-MM THK)  
11. 371-0808 Y [1] EDGE GP-BIT & CUTTING  
12. 383-3364 [2] CAP-BEARING  
13. 450-3992 [1] COVER  
14. 466-2917 [2] SPACER (51.2X57X23-MM THK)  
15. 466-2918 [2] SPACER (51.2X57X10-MM THK)  
16. 477-0065 [1] PLATE AS  
  153-7452 [1] HOOK  
17. 483-9298 [2] BOSS  
18. 483-9299 [2] RETAINER  
19. 456-9700 [1] BEARING  
21. 484-0214 [2] PIN-DOWEL  
22. 484-0217 [2] PIN AS  
23. 144-5478 [2] BOLT (M20X2.5X130-MM)  
24. 328-4847 [2] SPACER (28X17.5X13-MM THK)  
25. 3E-9411 [2] WASHER-HARD (17.5X38X6-MM THK)  
26. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
27. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
28. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
29. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
30. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
31. 8T-4193 M [2] BOLT (M16X2X50-MM)  
32. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
34. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
35. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
36. 8T-5878 M [8] BOLT (M24X3X80-MM)  
37. 9J-4782 [3] PROTECTOR  
38. 348-6260 B [6] SHIM (1.5-MM THK)  
39. 483-9315 B [20] SHIM (0.5-MM THK)  
40. 484-0219 B [12] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00647820764
 

483-9320: BLADE & EDGE GP-ANGLING

483-9320 BLADE & EDGE GP-ANGLING
S/N FD61-UP
PART OF 494-1763 OPTION AR-WORK TOOL
Type 2
AN ATTACHMENT
i07394914 M0064782
4839320 BLADE & EDGE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6K2 LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
2. 8T-4184 CM [2] BOLT (M12X1.75X45-MM)  
3. 8T-4193 CM [1] BOLT (M16X2X50-MM)  
4. 8T-5878 M [8] BOLT (M24X3X80-MM)  
5. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
6. 3E-9411 C [1] WASHER-HARD (17.5X38X6-MM THK)  
7. 4T-0231 [3] RETAINER  
8. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
9. 7D-1649 C [2] WASHER-HARD (13.5X32X5-MM THK)  
10. 8T-4121 C [9] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
12. 8T-4136 CM [5] BOLT (M10X1.5X25-MM)  
13. 8T-4137 CM [4] BOLT (M10X1.5X20-MM)  
14. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
15. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
17. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
18. 9J-4782 [3] PROTECTOR  
19. 089-8249 [2] SPACER (64X72X13-MM THK)  
20. 104-4817 [1] PIN  
21. 144-5478 [2] BOLT (M20X2.5X130-MM)  
22. 223-3279 [1] RETAINER  
23. 232-4810 C [3] PIN  
24. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER  
25. 328-4847 C [1] SPACER (28X17.5X13-MM THK)  
26. 358-2194 [3] PIN  
27. 358-2260 [1] ARM AS-SUPPORT  
28. 359-3371 [4] SPACER (50X58X16-MM THK)  
29. 371-0808 Y [1] EDGE GP-BIT & CUTTING  
30. 466-2917 [2] SPACER (51.2X57X23-MM THK)  
31. 466-2918 [2] SPACER (51.2X57X10-MM THK)  
32. 477-0065 [1] PLATE AS  
  153-7452 [1] HOOK  
33. 483-9298 [2] BOSS  
34. 483-9299 [2] RETAINER  
35. 483-9315 BC [20] SHIM (0.5-MM THK)  
36. 483-9321 [1] BLADE AS  
36A. 456-9700 [1] BEARING  
38. 484-0217 C [1] PIN AS  
39. 490-1616 C [2] CAP-BEARING  
40. 500-4763 C [1] PLATE  
41. 505-7069 C [1] PIN  
42. 505-7081 C [2] PIN AS  
43. 541-3521 C [1] COVER  
44. 541-3522 C [1] BRACKET AS  
45. 348-6260 B [6] SHIM (1.5-MM THK)  
46. 484-0219 B [12] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00647820765
 

348-6280: BLADE GP-ANGLING

348-6280 BLADE GP-ANGLING
S/N JRZ1-UP
PART OF 472-2257 OPTION AR-WORK TOOL
Type 1
AN ATTACHMENT
i04852311 M0064782
3486280 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6K2 LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 9J-4782 [1] PROTECTOR  
4. 089-8249 [2] SPACER (64X72X13-MM THK)  
5. 104-4817 [1] PIN  
6. 223-3279 [1] RETAINER  
7. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
9. 325-0002 Y [1] EDGE GP-BIT & CUTTING  
10. 348-6260 B [6] SHIM (1.5-MM THK)  
11. 455-0790 [1] BLADE AS  
11A. 456-9700 [1] BEARING  
12. 358-2194 [3] PIN  
13. 477-0065 [1] PLATE AS  
14. 359-3371 [4] SPACER (50X58X16-MM THK)  
15. 490-1616 [2] CAP-BEARING  
16. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
17. 8T-5878 M [8] BOLT (M24X3X80-MM)  
18. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
19. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
20. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
21. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
23. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
24. 450-3992 [1] COVER  
25. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
26. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
27. 466-2917 [2] SPACER (51.2X57X23-MM THK)  
28. 466-2918 [2] SPACER (51.2X57X10-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00647820766
 

348-6280: BLADE GP-ANGLING

348-6280 BLADE GP-ANGLING
S/N JRZ1-UP
PART OF 472-2257 OPTION AR-WORK TOOL
Type 2
AN ATTACHMENT
i07395355 M0064782
3486280 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6K2 LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 9J-4782 [1] PROTECTOR  
4. 089-8249 [2] SPACER (64X72X13-MM THK)  
5. 104-4817 [1] PIN  
6. 223-3279 [1] RETAINER  
7. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
8. 8T-4136 CM [5] BOLT (M10X1.5X25-MM)  
9. 325-0002 Y [1] EDGE GP-BIT & CUTTING  
10. 348-6260 B [6] SHIM (1.5-MM THK)  
11. 455-0790 [1] BLADE AS  
11A. 456-9700 [1] BEARING  
12. 358-2194 [3] PIN  
13. 477-0065 [1] PLATE AS  
14. 359-3371 [4] SPACER (50X58X16-MM THK)  
15. 490-1616 [2] CAP-BEARING  
16. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
17. 8T-5878 M [8] BOLT (M24X3X80-MM)  
18. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
19. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
20. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
21. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
23. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
24. 541-3521 C [1] COVER  
25. 541-3522 C [1] BRACKET AS  
26. 8T-4137 CM [2] BOLT (M10X1.5X20-MM)  
27. 466-2917 [2] SPACER (51.2X57X23-MM THK)  
28. 466-2918 [2] SPACER (51.2X57X10-MM THK)  
29. 8T-4121 C [9] WASHER-HARD (11X21X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00647820767
 

371-0779: BLADE GP-ANGLING

371-0779 BLADE GP-ANGLING -FOLDABLE
S/N SAZ1-UP
PART OF 472-2259 OPTION AR-WORK TOOL
AN ATTACHMENT
i06131432 M0064782
3710779 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6K2 LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 8D-3791 [3] PIN  
4. 089-8249 [2] SPACER (64X72X13-MM THK)  
5. 104-4817 [1] PIN  
6. 223-3279 [1] RETAINER  
7. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
8. 266-4761 [2] PIN AS  
9. 358-2194 [3] PIN  
10. 358-2260 [1] ARM AS-SUPPORT  
11. 359-3371 [4] SPACER (50X58X16-MM THK)  
12. 371-0808 Y [1] EDGE GP-BIT & CUTTING  
13. 490-1616 [2] CAP-BEARING  
14. 437-9738 C [2] DOWEL AS  
15. 450-3992 C [1] COVER  
16. 477-0065 C [1] PLATE AS  
17. C [1] BLADE AS (RH)  
17A. 456-9700 [1] BEARING  
  9R-3761 M [1] BOSS (M10X1.5X51-MM)  
  450-3991 [1] PLATE AS  
18. C [1] BLADE AS (LH)  
  8P-9770 [1] PLATE  
20. 466-2917 C [2] SPACER (51.2X57X23-MM THK)  
21. 466-2918 [2] SPACER (51.2X57X10-MM THK)  
22. 2U-9234 C [2] BUSHING  
23. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
24. 7D-1649 C [2] WASHER-HARD (13.5X32X5-MM THK)  
25. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
26. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
27. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
28. 8T-4189 CM [2] BOLT (M8X1.25X20-MM)  
29. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4224 C [2] WASHER-HARD (8.8X16X2-MM THK)  
31. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [8] BOLT (M24X3X80-MM)  
34. 9J-4782 [3] PROTECTOR  
35. 348-6260 B SHIM (1.5-MM THK)  
36. 498-6447 BY [2] SHIM GP-SPECIAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00647820768
 

187-1713: CONVERSION GP-WINCH

187-1713 CONVERSION GP-WINCH
S/N JTR1-UP
FAIRLEAD ROLLER
FOR USE WITH @@@@@187-1710@@@@@
AN ATTACHMENT
i05440618 M0064782
1871713 CONVERSION GP-WINCH Parts scheme
  For full view, you need register

Parts for your D6K2 LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 214-9542 [1] SHAFT-ROLLER  
2. 214-9543 Y [1] ROLLER GP-FAIRLEAD (TOP)  
3. 215-1866 [1] KEEPER  
4. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
5. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
6. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#M00647820769
 

325-0002: EDGE GP-BIT & CUTTING

325-0002 EDGE GP-BIT & CUTTING
S/N JRZ1-UP
PART OF 348-6280 BLADE GP-ANGLING
AN ATTACHMENT
i03659083 M0064782
3250002 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6K2 LGP TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9379 [1] BIT-END (RH)  
2. 8E-9378 [1] BIT-END (LH)  
3. 2J-3506 [26] NUT-FULL (3/4-10-THD)  
4. 5J-4773 [26] BOLT-PLOW (3/4-10X2.5-IN)  
5. 5P-8248 [26] WASHER-HARD (20X36.5X3.5-MM THK)  
6. 8E-7245 [2] EDGE-CUTTING  
 

Information:

Caterpillar Parts SIS Catalog D6K2 LGP :

WINDOW GP-SLIDING
388-1411 WINDOW GP-SLIDING
WINDOW GP-SLIDING
388-1410 WINDOW GP-SLIDING
WINDOW GP-CAB
486-0482 WINDOW GP-CAB
WINDOW GP-CAB
486-0482 WINDOW GP-CAB
WINDOW GP-CAB
483-9594 WINDOW GP-CAB
WINDOW GP-CAB
483-9594 WINDOW GP-CAB
WINDOW GP-CAB
338-9768 WINDOW GP-CAB
WINDOW GP-CAB
338-9767 WINDOW GP-CAB
BIT-END
462-4828 BIT-END
BIT-END
462-4829 BIT-END
BLADE & EDGE GP-ANGLING
483-9320 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
483-9320 BLADE & EDGE GP-ANGLING
BLADE GP-ANGLING
348-6280 BLADE GP-ANGLING
BLADE GP-ANGLING
348-6280 BLADE GP-ANGLING
BLADE GP-ANGLING
371-0779 BLADE GP-ANGLING
CONVERSION GP-WINCH
187-1713 CONVERSION GP-WINCH
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.