AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

371-0749 BLADE GP-ANGLING -FOLDABLE S/N DWN1-UP PART OF 472-2255 OPTION AR-WORK TOOL AN ATTACHMENT D6K2 XL


WORK TOOLS
BLADE GP
WINCH GP
GROUND ENGAGING TOOLS (G.E.T.)

TRACK-TYPE TRACTOR D6K2 XL TRACK-TYPE TRACTOR DFR
 D6K2 XL Track-Type Tractor DFR00001-UP (MACHINE) POWERED BY C4.4 Engine M0064784 D6K2 XL DFR   (2016)

WORK TOOLS

BLADE GP
BLADE GP-ANGLING
348-6280 BLADE GP-ANGLING
BLADE GP-ANGLING
348-6280 BLADE GP-ANGLING
BLADE GP-ANGLING
348-6300 BLADE GP-ANGLING
BLADE GP-ANGLING
348-6300 BLADE GP-ANGLING
BLADE GP-ANGLING
371-0749 BLADE GP-ANGLING
BLADE GP-ANGLING
371-0779 BLADE GP-ANGLING
BLADE GP-ANGLING
483-9250 BLADE GP-ANGLING
BLADE GP-ANGLING
483-9250 BLADE GP-ANGLING
SHIM GP-SPECIAL
498-6447 SHIM GP-SPECIAL
 

#M00647840760
 

371-0749: BLADE GP-ANGLING

371-0749 BLADE GP-ANGLING -FOLDABLE
S/N DWN1-UP
PART OF 472-2255 OPTION AR-WORK TOOL
AN ATTACHMENT
i06131430 M0064784
3710749 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 8D-3791 [3] PIN  
4. 9J-4782 [3] PROTECTOR  
5. 089-8249 [2] SPACER (64X72X13-MM THK)  
6. 104-4817 [1] PIN  
7. 223-3279 [1] RETAINER  
8. [1] PLATE & FILM GP  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
9. 437-9738 C [2] DOWEL AS  
10. 466-2917 C [2] SPACER (51.2X57X23-MM THK)  
11. 266-4761 [2] PIN AS  
12. 358-2194 [3] PIN  
13. 477-0065 C [1] PLATE AS  
14. 358-2260 [1] ARM AS-SUPPORT  
15. 359-3371 [4] SPACER (50X58X16-MM THK)  
16. C [1] BLADE AS (LH)  
  8P-9770 [1] PLATE  
17. C [1] BLADE AS (RH)  
17A. 456-9700 [1] BEARING  
  450-3991 [1] PLATE AS  
  9R-3761 M [1] BOSS (M10X1.5X51-MM)  
18. 371-0759 Y [1] EDGE GP-BIT & CUTTING  
19. 490-1616 [2] CAP-BEARING  
20. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
21. 7D-1649 C [2] WASHER-HARD (13.5X32X5-MM THK)  
22. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
23. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
24. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
25. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
27. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
28. 8T-5878 M [8] BOLT (M24X3X80-MM)  
29. 348-6260 B [6] SHIM (1.5-MM THK)  
30. 466-2918 C [2] SPACER (51.2X57X10-MM THK)  
31. BC [6] SHIM (0.5-MM THK)  
32. 450-3992 C [1] COVER  
33. 8T-4224 C [2] WASHER-HARD (8.8X16X2-MM THK)  
34. 8T-4189 CM [2] BOLT (M8X1.25X20-MM)  
35. 2U-9234 C [2] BUSHING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00647840761
 

371-0779: BLADE GP-ANGLING

371-0779 BLADE GP-ANGLING -FOLDABLE
S/N SAZ1-UP
PART OF 472-2259 OPTION AR-WORK TOOL
AN ATTACHMENT
i06131432 M0064784
3710779 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 8D-3791 [3] PIN  
4. 089-8249 [2] SPACER (64X72X13-MM THK)  
5. 104-4817 [1] PIN  
6. 223-3279 [1] RETAINER  
7. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
8. 266-4761 [2] PIN AS  
9. 358-2194 [3] PIN  
10. 358-2260 [1] ARM AS-SUPPORT  
11. 359-3371 [4] SPACER (50X58X16-MM THK)  
12. 371-0808 Y [1] EDGE GP-BIT & CUTTING  
13. 490-1616 [2] CAP-BEARING  
14. 437-9738 C [2] DOWEL AS  
15. 450-3992 C [1] COVER  
16. 477-0065 C [1] PLATE AS  
17. C [1] BLADE AS (RH)  
17A. 456-9700 [1] BEARING  
  9R-3761 M [1] BOSS (M10X1.5X51-MM)  
  450-3991 [1] PLATE AS  
18. C [1] BLADE AS (LH)  
  8P-9770 [1] PLATE  
20. 466-2917 C [2] SPACER (51.2X57X23-MM THK)  
21. 466-2918 [2] SPACER (51.2X57X10-MM THK)  
22. 2U-9234 C [2] BUSHING  
23. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
24. 7D-1649 C [2] WASHER-HARD (13.5X32X5-MM THK)  
25. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
26. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
27. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
28. 8T-4189 CM [2] BOLT (M8X1.25X20-MM)  
29. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4224 C [2] WASHER-HARD (8.8X16X2-MM THK)  
31. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
32. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 8T-5878 M [8] BOLT (M24X3X80-MM)  
34. 9J-4782 [3] PROTECTOR  
35. 348-6260 B SHIM (1.5-MM THK)  
36. 498-6447 BY [2] SHIM GP-SPECIAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00647840762
 

483-9250: BLADE GP-ANGLING

483-9250 BLADE GP-ANGLING -FOLDABLE
S/N FD51-UP
PART OF 494-1762 OPTION AR-WORK TOOL
Type 1
AN ATTACHMENT
i06538332 M0064784
4839250 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [3] RETAINER  
3. 089-8249 [2] SPACER (64X72X13-MM THK)  
4. 104-4817 [1] PIN  
5. 223-3279 [1] RETAINER  
6. [1] PLATE & FILM GP  
  8T-7371 [1] PLATE-SERIAL NUMBER  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
7. 358-2194 [3] PIN  
8. 358-2260 [1] ARM AS-SUPPORT  
9. 359-3371 [4] SPACER (50X58X16-MM THK)  
10. 371-0759 Y [1] EDGE GP-BIT & CUTTING  
11. 383-3364 [2] CAP-BEARING  
12. 450-3992 [1] COVER  
13. 466-2917 [2] SPACER (51.2X57X23-MM THK)  
14. 466-2918 [2] SPACER (51.2X57X10-MM THK)  
15. 477-0065 [1] PLATE AS  
16. [1] BLADE AS (RH)  
16A. 456-9700 [1] BEARING  
18. 483-9298 [2] BOSS  
19. 483-9299 [2] RETAINER  
20. 484-0214 [2] PIN-DOWEL  
21. 484-0217 [2] PIN AS  
22. 144-5478 [2] BOLT (M20X2.5X130-MM)  
23. 328-4847 [2] SPACER (28X17.5X13-MM THK)  
24. 3E-9411 [2] WASHER-HARD (17.5X38X6-MM THK)  
25. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
26. 8D-3791 [3] PIN  
27. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
28. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
29. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
30. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
31. 8T-4193 M [2] BOLT (M16X2X50-MM)  
32. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
34. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
35. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
36. 8T-5878 M [8] BOLT (M24X3X80-MM)  
37. 9J-4782 [3] PROTECTOR  
38. 348-6260 B [6] SHIM (1.5-MM THK)  
39. 483-9315 B [20] SHIM (0.5-MM THK)  
40. 484-0219 B [12] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00647840763
 

483-9250: BLADE GP-ANGLING

483-9250 BLADE GP-ANGLING -FOLDABLE
S/N FD51-UP
PART OF 494-1762 OPTION AR-WORK TOOL
Type 2
AN ATTACHMENT
i07394912 M0064784
4839250 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
2. 8T-4184 CM [2] BOLT (M12X1.75X45-MM)  
3. 8T-4193 CM [1] BOLT (M16X2X50-MM)  
4. 8T-5878 M [8] BOLT (M24X3X80-MM)  
5. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
6. 3E-9411 C [1] WASHER-HARD (17.5X38X6-MM THK)  
7. 4T-0231 [3] RETAINER  
8. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
9. 7D-1649 C [2] WASHER-HARD (13.5X32X5-MM THK)  
10. 8T-4121 C [9] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
12. 8T-4136 CM [5] BOLT (M10X1.5X25-MM)  
13. 8T-4137 CM [4] BOLT (M10X1.5X20-MM)  
14. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
15. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
17. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
18. 9J-4782 [3] PROTECTOR  
19. 089-8249 [2] SPACER (64X72X13-MM THK)  
20. 104-4817 [1] PIN  
21. 144-5478 [2] BOLT (M20X2.5X130-MM)  
22. 223-3279 [1] RETAINER  
23. 232-4810 C [3] PIN  
24. [1] PLATE & FILM GP  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
25. 328-4847 C [1] SPACER (28X17.5X13-MM THK)  
26. 358-2194 [3] PIN  
27. 358-2260 [1] ARM AS-SUPPORT  
28. 359-3371 [4] SPACER (50X58X16-MM THK)  
29. 371-0759 Y [1] EDGE GP-BIT & CUTTING  
30. 466-2917 [2] SPACER (51.2X57X23-MM THK)  
31. 466-2918 [2] SPACER (51.2X57X10-MM THK)  
32. 477-0065 [1] PLATE AS  
33. [1] BLADE AS (RH)  
33A. 456-9700 [1] BEARING  
34. 484-0219 B [12] SHIM (0.5-MM THK)  
35. 483-9298 [2] BOSS  
36. 483-9299 [2] RETAINER  
37. 483-9315 BC [20] SHIM (0.5-MM THK)  
38. 484-0217 C [1] PIN AS  
39. 490-1616 C [2] CAP-BEARING  
40. 500-4763 C [1] PLATE  
41. 505-7069 C [1] PIN  
42. 505-7081 C [2] PIN AS  
43. 541-3521 C [1] COVER  
44. 541-3522 C [1] BRACKET AS  
45. 348-6260 B [6] SHIM (1.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00647840764
 

187-1713: CONVERSION GP-WINCH

187-1713 CONVERSION GP-WINCH
S/N DFR1-UP
FAIRLEAD ROLLER
FOR USE WITH @@@@@187-1710@@@@@
AN ATTACHMENT
i05440618 M0064784
1871713 CONVERSION GP-WINCH Parts scheme
  For full view, you need register

Parts for your D6K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 214-9542 [1] SHAFT-ROLLER  
2. 214-9543 Y [1] ROLLER GP-FAIRLEAD (TOP)  
3. 215-1866 [1] KEEPER  
4. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
5. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
6. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#M00647840765
 

325-0002: EDGE GP-BIT & CUTTING

325-0002 EDGE GP-BIT & CUTTING
S/N JRZ1-UP
PART OF 348-6280 BLADE GP-ANGLING
AN ATTACHMENT
i03659083 M0064784
3250002 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9379 [1] BIT-END (RH)  
2. 8E-9378 [1] BIT-END (LH)  
3. 2J-3506 [26] NUT-FULL (3/4-10-THD)  
4. 5J-4773 [26] BOLT-PLOW (3/4-10X2.5-IN)  
5. 5P-8248 [26] WASHER-HARD (20X36.5X3.5-MM THK)  
6. 8E-7245 [2] EDGE-CUTTING  
 

#M00647840766
 

371-0759: EDGE GP-BIT & CUTTING

371-0759 EDGE GP-BIT & CUTTING
S/N FD51-UP; DWN1-UP
PART OF 371-0749, 483-9250 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
i04883269 M0064784
3710759 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
2. 8E-9379 [1] BIT-END (RH)  
3. 300-0168 [1] BIT-END (LH)  
4. 342-8851 [1] EDGE-CUTTING  
5. 371-0758 [1] EDGE-CUTTING  
6. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
7. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#M00647840767
 

371-0808: EDGE GP-BIT & CUTTING

371-0808 EDGE GP-BIT & CUTTING
S/N SAZ1-UP
PART OF 371-0779 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
i04852369 M0064784
3710808 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9379 [1] BIT-END (RH)  
2. 297-1699 [1] BIT-END  
3. 371-0786 [1] EDGE-CUTTING  
4. 2J-3506 [26] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [26] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [26] WASHER-HARD (20X36.5X3.5-MM THK)  
7. 8E-7245 [1] EDGE-CUTTING  
 

#M00647840768
 

507-2841: EDGE GP-BIT & CUTTING

507-2841 EDGE GP-BIT & CUTTING -LEVEL CUT
S/N DFR1-UP
FIELD INSTALLATION
i06986686 M0064784
5072841 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 323-4279 [1] BIT-END (RH)  
2. 323-4280 [1] BIT-END (LH)  
3. 484-2299 [2] EDGE-CUTTING  
4. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#M00647840769
 

507-2842: EDGE GP-BIT & CUTTING

507-2842 EDGE GP-BIT & CUTTING -LEVEL CUT
S/N DFR1-UP
REVERSIBLE
FIELD INSTALLATION
i06986688 M0064784
5072842 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6K2 XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4285 [2] BIT-END  
2. 342-8851 [2] EDGE-CUTTING  
3. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
4. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
5. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

Information:

Special Instruction
Installation of the Variable Pitch, Angle, and Tilt Blade on a D6K2 Track-Type Tractor {6052, 6060, 6701}
Installation of the Variable Pitch, Angle, and Tilt Blade on a D6K2 Track-Type Tractor {6052, 6060, 6701}
Rework Procedure for the Foldable Blade on Certain D6K2 and D6N Track-Type Tractors {6052, 6060, 6701}
Rework Procedure for the Foldable Blade on Certain D6K2 and D6N Track-Type Tractors {6052, 6060, 6701}
Installation of the Variable Pitch, Angle, and Tilt Blade on a D6K2 Track-Type Tractor {6052, 6060, 6701}
Installation of the Variable Pitch, Angle, and Tilt Blade on a D6K2 Track-Type Tractor {6052, 6060, 6701}
Specifications
Angling Blade
D6K2 and D6K Track-Type Tractor Systems
Angling Blade
D6K2 and D6K Track-Type Tractor Systems
Angling Blade
D6K2 and D6K Track-Type Tractor Systems
Angling Blade
D6K2 and D6K Track-Type Tractor Systems
Angling Blade
D6K2 and D6K Track-Type Tractor Systems
Disassembly and Assembly
Bulldozer Blade (VPAT) - Remove and Install
D6K Track Type Tractor Machine Systems
Service Magazine
An Improved Design is Now Used on the Foldable Blades on Certain D6K2 and D6N Track-Type Tractors {6052, 6060, 6701}
An Improved Design is Now Used on the Foldable Blades on Certain D6K2 and D6N Track-Type Tractors {6052, 6060, 6701}
New Installation Procedure to Improve Harness Durability for Blade Slope Assist on Certain D6K and D6N Track-Type Tractors {6052, 6060, 6063, 6701}
New Installation Procedure to Improve Harness Durability for Blade Slope Assist on Certain D6K and D6N Track-Type Tractors {6052, 6060, 6063, 6701}

Caterpillar Parts SIS Catalog D6K2 XL :

BLADE GP-ANGLING
348-6300 BLADE GP-ANGLING
BLADE GP-ANGLING
348-6300 BLADE GP-ANGLING
BLADE GP-ANGLING
348-6280 BLADE GP-ANGLING
BLADE GP-ANGLING
348-6280 BLADE GP-ANGLING
BIT-END
462-4829 BIT-END
BIT-END
462-4828 BIT-END
WIPER GP-WINDOW
484-8213 WIPER GP-WINDOW
WINDOW GP-SLIDING
388-1411 WINDOW GP-SLIDING
BLADE GP-ANGLING
371-0779 BLADE GP-ANGLING
BLADE GP-ANGLING
483-9250 BLADE GP-ANGLING
BLADE GP-ANGLING
483-9250 BLADE GP-ANGLING
CONVERSION GP-WINCH
187-1713 CONVERSION GP-WINCH
EDGE GP-BIT & CUTTING
325-0002 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
371-0759 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
371-0808 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2841 EDGE GP-BIT & CUTTING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.