ELECTRICAL AND STARTING SYSTEM
SENSOR GPSTARTING AID GP
STARTING AR
STARTING MOTOR GP
SWITCH GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
#M00655600280
234-5013: SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE -TRANSMISSION OIL
S/N DF71-UP; 2L81-UP; TXX1-UP
INTAKE AIR MANIFOLD
PART OF 343-8126 BASE GP-FUEL FILTER, 376-4483 CONTROL GP-TRANSMISSION HYD, 379-6636 SENSOR GP-ENGINE, 470-4416 WIRING GP-FRONT
ALSO AN ATTACHMENT
S/N DF71-UP; 2L81-UP; TXX1-UP
INTAKE AIR MANIFOLD
PART OF 343-8126 BASE GP-FUEL FILTER, 376-4483 CONTROL GP-TRANSMISSION HYD, 379-6636 SENSOR GP-ENGINE, 470-4416 WIRING GP-FRONT
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 730C2 EJ EJECTOR TRUCK:
CATERPILLAR SIS#M00655600281
364-8682: STARTING AID GP-ETHER
For full view, you need register
Parts for your 730C2 EJ EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2V-1713 | [1] | TAG-NOTICE (STARTING AID) | |
| 2. | 3S-2093 | [1] | STRAP-CABLE | |
| 3. | 7N-2059 | [1] | CLAMP AS (CYLINDER) | |
| 4. | 230-0917 | [1] | FITTING AS | |
| 236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
| 5. | 239-1134 | [1] | VALVE GP-ETHER STARTING (24-VOLT) | |
| 7N-9801 | [1] | GASKET | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 358-4889 | [1] | FILTER (ETHER START) | ||
| 6. | 252-1607 | [1] | ATOMIZER AS | |
| 236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
| 7. | 450-6352 | [1] | BRACKET AS | |
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 8. | 369-6872 | [1] | CONNECTOR AS | |
| 5P-5528 | [1] | BUSHING-REDUCER | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 9. | 4P-7581 | [1] | CLIP (LADDER) | |
| 10. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 11. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 12. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| 14. | 2U-4223 D | TUBE (0.2-M) | ||
| 275-3634 AF | [1] | CYLINDER AS-ETHER (U.S.) | ||
| (MUST BE PROCURED LOCALLY FROM YOUR CAT DEALER) | ||||
| A | NOT PART OF THIS GROUP | |||
| D | ORDER BY THE METER | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#M00655600282
381-0106: STARTING AR
For full view, you need register
Parts for your 730C2 EJ EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 381-0107 Y | [1] | BATTERY & WIRING GP | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00655600283
381-0108: STARTING AR-COLD WEATHER
For full view, you need register
Parts for your 730C2 EJ EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 381-0109 Y | [1] | BATTERY & WIRING GP | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00655600284
348-7651: STARTING MOTOR GP-ELECTRIC
348-7651 STARTING MOTOR GP-ELECTRIC
S/N 2L81-UP; TXX1-UP
24-VOLT
PART OF 369-0809 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
S/N 2L81-UP; TXX1-UP
24-VOLT
PART OF 369-0809 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
For full view, you need register
Parts for your 730C2 EJ EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7M-0326 | [1] | CONNECTOR | |
| 2. | 9H-3757 | [2] | WASHER (0.516X1X0.094-IN THK) | |
| 3. | 1S-7446 | [3] | SCREW-MACHINE (8-32X0.437-IN) | |
| 4. | 8C-9660 | [3] | WASHER (4.6X7.9X0.8-MM THK) | |
| 5. | 9S-2544 | [9] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 6. | 7M-0327 | [1] | WASHER-THRUST (17.4X25.4X1.6-MM THK) | |
| 7. | 3T-3418 | [1] | FRAME AS-END | |
| 3T-3423 | [1] | CUP | ||
| 3T-3424 | [1] | PLUG-FELT | ||
| 9G-4101 | [1] | BUSHING-END | ||
| 8. | 3T-9525 Y | [1] | PLATE AS-BRUSH (STARTING MOTOR) | |
| 9. | 1T-0808 | [2] | WASHER (0.516X0.812X0.09-IN THK) | |
| 10. | 3T-3422 | [1] | WIRE AS | |
| 11. | 2J-8163 | [2] | SEAL-O-RING | |
| 12. | 7X-3373 | [1] | BOLT (5/16-18X0.88-IN) | |
| 13. | 3T-3434 | [6] | PLUG | |
| 14. | 5J-5314 | [5] | BOLT (5/16-18X1.5-IN) | |
| 15. | 3L-3380 | [1] | BUSHING-TERMINAL | |
| 16. | 8C-3089 | [1] | SEAL-O-RING | |
| 17. | 4M-1853 | [1] | LEVER AS-SHIFT | |
| 18. | 5M-3034 | [1] | LOCKNUT (5/16-24-THD) | |
| 19. | 7L-2894 | [4] | GASKET | |
| 20. | 4M-1831 | [4] | PLUG-LEVER HOUSING | |
| 21. | 4M-1854 | [1] | SHAFT-LEVER | |
| 22. | 1H-1023 | [1] | SEAL-O-RING | |
| 23. | 2D-6392 | [1] | SEAL-O-RING | |
| 24. | 7T-3974 | [1] | HOUSING AS-DRIVE | |
| 25. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
| 26. | 2H-3429 | [1] | RING-RETAINING | |
| 27. | 6V-1322 | [4] | BOLT (1/4-20X0.375-IN) | |
| 28. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 29. | 6N-3279 | [1] | INSULATOR | |
| 30. | 0S-1597 | [13] | BOLT (1/4-28X1-IN) | |
| 31. | 1M-9971 | [1] | SPACER (0.835X1.72X0.188-IN THK) | |
| 32. | 1H-2629 | [3] | STRIP-INSULATION | |
| 33. | 7M-0324 | [1] | COIL AS-FIELD | |
| 34. | 3R-8797 | [12] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
| 35. | 7F-3488 | [6] | SHOE-POLE | |
| 36. | 7M-8651 | [1] | ARMATURE AS | |
| 37. | 7M-0325 | [1] | INSULATOR | |
| 38. | 3T-9524 | [6] | BRUSH AS (STARTING MOTOR) | |
| 39. | 3N-3763 | [1] | KIT-TERMINAL (STARTING MOTOR) | |
| (INCLUDES BUSHINGS & WASHERS) | ||||
| 41. | 3R-8801 | [1] | CLAMP | |
| 42. | 8F-1434 | [2] | LOCKWASHER | |
| 43. | 6V-8188 | [6] | NUT (1/2-13-THD) | |
| 44. | 7X-0562 | [6] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| 45. | 4B-2049 | [6] | NUT (10-32-THD) | |
| 46. | 8T-0328 | [10] | WASHER-HARD (5.5X10X1-MM THK) | |
| 47. | 3T-9494 | [6] | SPRING | |
| 48. | 3E-7771 | [1] | HOUSING AS (STARTING MOTOR) | |
| 49. | 9G-4101 | [1] | BUSHING-END | |
| 50. | 3T-3424 | [3] | PLUG-FELT | |
| 51. | 3T-3423 | [3] | CUP | |
| 52. | 1M-9968 | [1] | BUSHING | |
| 53. | 2F-6678 | [1] | SEAL-LIP TYPE | |
| 54. | 4L-2729 | [1] | WASHER (0.844X1.9X0.188-IN THK) | |
| 55. | 4M-1896 | [1] | BUSHING-TERMINAL | |
| 56. | 045-4065 | [4] | SCREW-MACHINE (10-32X0.75-IN) | |
| 57. | 125-6535 | [1] | COVER-STARTING MOTOR | |
| 58. | 338-3453 | [1] | SOLENOID AS-STARTING MOTOR (24-VOLT) | |
| 3R-8801 | [1] | CLAMP | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00655600285
369-0809: STARTING MOTOR GP-ELECTRIC
369-0809 STARTING MOTOR GP-ELECTRIC
S/N 2L81-UP; TXX1-UP
24-VOLT, 50-MT
PART OF 376-4211, 381-6485 ENGINE AR-COMPLETE
FOR USE WITH LEFT HAND STARTER APPLICATIONS
AN ATTACHMENT
S/N 2L81-UP; TXX1-UP
24-VOLT, 50-MT
PART OF 376-4211, 381-6485 ENGINE AR-COMPLETE
FOR USE WITH LEFT HAND STARTER APPLICATIONS
AN ATTACHMENT
For full view, you need register
Parts for your 730C2 EJ EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-9603 | [1] | CABLE AS-STARTING MOTOR | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(28-CM) | |||
| 2. | 9Y-6089 | [1] | GASKET | |
| 3. | 348-7651 Y | [1] | STARTING MOTOR GP-ELECTRIC | |
| 4. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| E | ORDER BY THE CENTIMETER | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00655600286
7N-0718: SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N 2L81-UP
12-VOLT
PART OF 446-6304 WIRING GP-ELECTRONIC CONTROL
S/N 2L81-UP
12-VOLT
PART OF 446-6304 WIRING GP-ELECTRONIC CONTROL
For full view, you need register
#M00655600287
241-8368: SWITCH GP-MAGNETIC
For full view, you need register
Parts for your 730C2 EJ EJECTOR TRUCK:
CATERPILLAR SIS#M00655600288
337-9078: SWITCH GP-MAGNETIC
337-9078 SWITCH GP-MAGNETIC
S/N 2L81-UP
24-VOLT TO 32-VOLT
PART OF 446-6304 WIRING GP-ELECTRONIC CONTROL
S/N 2L81-UP
24-VOLT TO 32-VOLT
PART OF 446-6304 WIRING GP-ELECTRONIC CONTROL
For full view, you need register
#M00655600289
398-0940: SWITCH GP-MAGNETIC
398-0940 SWITCH GP-MAGNETIC
S/N 2L81-UP
24-VOLT
PART OF 367-1754 PANEL GP-CIRCUIT BREAKER
S/N 2L81-UP
24-VOLT
PART OF 367-1754 PANEL GP-CIRCUIT BREAKER
For full view, you need register
Parts for your 730C2 EJ EJECTOR TRUCK:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Cat Production Measurement System (CPM) Installation Procedure for Certain 725C and 730C Articulated Trucks {1408, 1439, 1926, 5057, 7490, 7566, 7601, 7603, 7610, 7620}
Cat Production Measurement System (CPM) Installation Procedure for Certain 725C and 730C Articulated Trucks {1408, 1439, 1926, 5057, 7490, 7566, 7601, 7603, 7610, 7620}
Cat Production Measurement System (CPM) Installation Procedure for Certain 725C and 730C Articulated Trucks {1408, 1439, 1926, 5057, 7490, 7566, 7601, 7603, 7610, 7620}
Technical Information Bulletin
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Wheel Speed Sensor May Fail on Certain 700 Series Articulated Trucks {1408, 1439, 4008}
Wheel Speed Sensor May Fail on Certain 700 Series Articulated Trucks {1408, 1439, 4008}
Wheel Speed Sensor May Fail on Certain 700 Series Articulated Trucks {1408, 1439, 4008}
Specifications
Temperature Sensor (Torque Converter Oil)
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems
Speed Sensor (Torque Converter Output)
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems
Speed Sensor (Torque Converter Output)
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems
Position Sensor (Throttle)
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems
Speed Sensor (Transmission Output)
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems
Testing and Adjusting
Troubleshooting
Sensor Signal (Analog, Passive) - Test
725C2, 730C, 730C EJECTOR, 730C2 and 730C2 EJECTOR Articulated Trucks
725C2, 730C, 730C EJECTOR, 730C2 and 730C2 EJECTOR Articulated Trucks
Sensor Signal (Analog, Active) - Test
725C2, 730C, 730C EJECTOR, 730C2 and 730C2 EJECTOR Articulated Trucks
725C2, 730C, 730C EJECTOR, 730C2 and 730C2 EJECTOR Articulated Trucks
Sensor (Data Link Type) - Test
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application
Sensor Supply - Test
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application
725C, 725C2, 730C, 730C Ejector, 730C2, 730C2 EJ, 735C, 740 Ejector, 740C Ejector, 745 and 745C Articulated Trucks Cat® Production Measurement Application
Disassembly and Assembly
Inlet Air Temperature Sensor - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
Temperature Sensor (Transmission Oil) - Remove and Install
730C2 and 725C2 Articulated Truck Power Train
730C2 and 725C2 Articulated Truck Power Train
Service Magazine
Improved Payload Sensor for Monitor Arrangement Is Now Used on Certain 700 Series Articulated Trucks {1408, 1439, 7494}
Improved Payload Sensor for Monitor Arrangement Is Now Used on Certain 700 Series Articulated Trucks {1408, 1439, 7494}
Improved Payload Sensor for Monitor Arrangement Is Now Used on Certain 700 Series Articulated Trucks {1408, 1439, 7494}
