502-6425 HARNESS AS-CAB -UPPER CAB S/N 2L61-UP PART OF 459-2359 WIRING GP-CAB 725C2 ARTICULATED TRUCK

Part No	Qty	Parts name
309-9886	[1]	BLOCK AS-FUSE
264-3617	[2]	LOCKWASHER
5C-7261 M	[2]	NUT (M8X1.25-THD)
7X-0608	[2]	WASHER-HARD (10.2X16X2-MM THK)
280-2710	[1]	CIRCUIT BREAKER AS (20-AMPERE, MANUAL RESET)
274-3774	[2]	CAP-CONNECTOR
123-7615	[1]	CONNECTOR (1-PIN)
228-5856	[1]	CONNECTOR (10-PIN)
113-8490	[8]	FUSE (10-AMPERE)
113-8491	[5]	FUSE (15-AMPERE)
113-8492	[6]	FUSE (20-AMPERE)
141-2760	[18]	FUSE (7.5-AMPERE)
264-5644	[2]	ENGINE AR-COMPLETE
5C-7261 M	[2]	NUT (M8X1.25-THD)
211-0052	[2]	NUT (1-11/16-18-THD)
7T-0093	[6]	PIN-CONNECTOR (12-GA TO 14-GA)
9X-3401	[40]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[40]	PIN-CONNECTOR (14-GA TO 16-GA)
271-5604	[52]	PIN-CONNECTOR (20-GA)
		-OR-
347-0109	[52]	WIRE AS (18-GA)
9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
176-2947	[2]	KIT-CONNECTING PLUG (4-PIN)
240-7878	[2]	PLUG AS-CONNECTOR (3-PIN)
		(EACH INCLUDES)
455-0705	[1]	SEAL-CONNECTOR
281-3388	[2]	PLUG AS-CONNECTOR (6-PIN)
		(EACH INCLUDES)
455-0708	[1]	SEAL-CONNECTOR
281-8803	[1]	PLUG AS-CONNECTOR (3-PIN)
455-0705	[1]	SEAL-CONNECTOR
331-4224	[1]	KIT-CONNECTING PLUG (6-PIN)
331-4226	[4]	KIT-CONNECTING PLUG (2-PIN)
155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
245-7434	[1]	KIT-CONNECTING PLUG (10-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
245-8026	[1]	PLUG AS-CONNECTOR (2-PIN)
8T-8737	[22]	PLUG-SEAL
9G-3695	[32]	PLUG-SEAL
274-8267	[2]	PLUG (4-GA)
242-1555	[1]	PULLER-FUSE
151-9272	[2]	KIT-RECEPTACLE (2-PIN)
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
210-8950	[1]	RECEPTACLE-CONNECTOR (9-PIN)
272-2840	[1]	RECEPTACLE AS-CONNECTOR (31-PIN)
358-4103	[1]	RECEPTACLE AS
245-8027	[1]	RECEPTACLE AS (9-PIN)
248-2841	[3]	RELAY AS (24-VOLT)
363-7123	[2]	RELAY AS (24-VOLT)
274-3784	[2]	CAP-SEAL
274-3778	[1]	CAP-SEAL
7T-0094	[5]	SOCKET-CONNECTOR (12-GA TO 14-GA)
196-2412	[46]	TERMINAL AS (16-GA)
		(EACH INCLUDES)
7R-2750	[1]	SEAL-CONNECTOR
196-2413	[9]	TERMINAL AS (12-GA)
		(EACH INCLUDES)
128-4123	[1]	SEAL-CABLE
194-5226	[128]	WIRE AS (16-GA)
		-OR-
194-5227	[128]	WIRE AS (14-GA)
204-6195	[2]	SOCKET-CONNECTOR (10-GA)
9X-3402	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
3S-2093	[7]	STRAP-CABLE
1P-0810 B		TAPE-ELECTRICAL
329-3734 B		TAPE-ELECTRICAL
2L-8051	[1]	TERMINAL-RING (6-GA, 5/16-IN SCREW)
		-OR-
5P-3455	[1]	TERMINAL-RING (8-GA, 5/16-IN SCREW)
9G-9435	[2]	TERMINAL-RING (18-GA TO 22-GA, 3/8-IN SCREW)
	[2]	TERMINAL AS
		(EACH INCLUDES)
6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(1-M)
	[5]	TERMINAL AS
		(EACH INCLUDES)
6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(1-M)
2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
104-1995	[10]	TERMINAL-BLADE (14-GA TO 18-GA)
124-8616	[2]	TERMINAL-RECEPTACLE (18-GA TO 22-GA)
124-8617	[2]	TERMINAL-RECEPTACLE (18-GA TO 22-GA)
204-1297	[7]	TERMINAL AS-BLADE (18-GA TO 20-GA)
		(EACH INCLUDES)
235-4123	[1]	TERMINAL (18-GA TO 20-GA)
5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
6V-9023 E		TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(105-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.9-M)
7X-0608	[2]	WASHER-HARD (10.2X16X2-MM THK)
310-0674	[2]	LOCKWASHER
155-2259	[1]	WEDGE-PLUG LOCK (8-PIN)
B		USE AS REQUIRED
D		ORDER BY THE METER
E		ORDER BY THE CENTIMETER
M		METRIC PART

#M00655640201

502-6426: HARNESS AS-CAB

HARNESS AS-CAB

502-6426 HARNESS AS-CAB
S/N 2L61-UP
PART OF 459-2359 WIRING GP-CAB

i06826844 M0065564

For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS

Part No	Qty	Parts name
126-1774	[2]	COVER-CONNECTOR
347-0596	[1]	FLANGE-MOUNTING
211-0052	[7]	NUT (1-11/16-18-THD)
7T-0093	[7]	PIN-CONNECTOR (12-GA TO 14-GA)
9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
9X-3401	[175]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[175]	PIN-CONNECTOR (14-GA TO 16-GA)
276-1151	[4]	PIN-CONNECTOR (8-GA TO 10-GA)
272-2838	[1]	PLUG AS-CONNECTOR (31-PIN)
309-6831	[2]	PLUG AS-CONNECTOR (70-PIN)
		(EACH INCLUDES)
159-9322	[1]	SEAL-O-RING
331-4222	[1]	KIT-CONNECTING PLUG (12-PIN)
331-4224	[1]	KIT-CONNECTING PLUG (6-PIN)
331-4226	[1]	KIT-CONNECTING PLUG (2-PIN)
155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
331-3594	[1]	PLUG AS-CONNECTOR (31-PIN)
338-8860	[2]	PLUG AS-CONNECTOR (70-PIN)
		(EACH INCLUDES)
159-9322	[1]	SEAL-O-RING
174-3016	[1]	PLUG AS-CONNECTOR (3-PIN)
8T-8737	[235]	PLUG-SEAL
9G-3695	[32]	PLUG-SEAL
274-8267	[2]	PLUG (4-GA)
176-9299	[1]	KIT-RECEPTACLE (3-PIN)
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
272-2840	[2]	RECEPTACLE AS-CONNECTOR (31-PIN)
273-6316	[1]	RECEPTACLE AS-CONNECTOR (9-PIN)
167-7801	[1]	RESISTOR AS (390-OHM, 2-WATT)
8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
169-0705	[6]	SEAL
274-3779	[3]	CAP-SEAL
194-5226	[253]	WIRE AS (16-GA)
		-OR-
194-5227	[253]	WIRE AS (14-GA)
3S-2093	[4]	STRAP-CABLE
1P-0810 B		TAPE-ELECTRICAL
329-3734 B		TAPE-ELECTRICAL
9G-9435	[1]	TERMINAL-RING (18-GA TO 22-GA, 3/8-IN SCREW)
2L-8079	[5]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(190-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
310-0674	[7]	LOCKWASHER
155-2258	[4]	WEDGE-PLUG LOCK (12-PIN)
155-2259	[1]	WEDGE-PLUG LOCK (8-PIN)
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER

#M00655640202

424-5545: HARNESS AS-CONTROL

HARNESS AS-CONTROL

424-5545 HARNESS AS-CONTROL -TANK
S/N 2L61-UP
PART OF 470-4415 WIRING GP-FRONT

i05409392 M0065564

For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS

Part No	Qty	Parts name
274-3775	[1]	CAP-CONNECTOR
180-9214	[1]	NUT (1-11/16-18-THD)
213-0139	[4]	PIN (4-MM)
7T-0093	[3]	PIN-CONNECTOR (12-GA TO 14-GA)
8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
9W-0852	[6]	PIN-CONNECTOR (14-GA TO 16-GA)
9X-3401	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
177-9656	[1]	KIT-CONNECTING PLUG (4-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8T-8737	[9]	PLUG-SEAL
169-0705	[6]	SEAL
8T-8730	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
9W-0844	[8]	SOCKET-CONNECTOR (14-GA TO 16-GA)
3T-4692	[1]	TERMINAL-RING (6-GA, 7/16-IN SCREW)
		-OR-
3T-4693	[1]	TERMINAL-RING (8-GA, 7/16-IN SCREW)

#M00655640203

433-0095: HARNESS AS-CONTROL

HARNESS AS-CONTROL

433-0095 HARNESS AS-CONTROL -MAIN CONTROL VALVE
S/N 2L61-UP
PART OF 470-4428 WIRING GP-FRONT

i05409401 M0065564

For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS

Part No	Qty	Parts name
8T-8729	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
230-4013	[3]	PLUG AS-CONNECTOR (3-PIN)
		(EACH INCLUDES)
264-7030	[1]	SEAL-CONNECTOR
8T-8737	[2]	PLUG-SEAL
102-8805	[1]	KIT-RECEPTACLE (6-PIN)
102-8806	[1]	KIT-RECEPTACLE (8-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
9X-3402	[9]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[9]	SOCKET-CONNECTOR (14-GA TO 16-GA)
1P-0810 B		TAPE-ELECTRICAL
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER

#M00655640204

480-7190: HARNESS AS-CONTROL

HARNESS AS-CONTROL

480-7190 HARNESS AS-CONTROL
S/N 2L61-UP
PART OF 396-1139, 396-1140, 454-7219, 454-7220 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT

i06568258 M0065564

For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS

Part No	Qty	Parts name
237-0336	[1]	COVER (CONNECTOR)
9X-3401	[15]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[15]	PIN-CONNECTOR (14-GA TO 16-GA)
155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
		(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
159-9322	[1]	SEAL-O-RING
8T-8737	[62]	PLUG-SEAL
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
190-7614	[1]	KIT-RECEPTACLE (12-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
9X-3402	[20]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[20]	SOCKET-CONNECTOR (14-GA TO 16-GA)
194-5226	[9]	WIRE AS (16-GA)
		-OR-
194-5227	[9]	WIRE AS (14-GA)
329-3734 B		TAPE-ELECTRICAL
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER

#M00655640205

367-5453: HARNESS AS-ENGINE

HARNESS AS-ENGINE

367-5453 HARNESS AS-ENGINE
S/N WYE1-UP
PART OF 354-5336 WIRING GP-ELECTRONIC CONTROL
AN ATTACHMENT

i05454257 M0065564

For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[9]	STRAP-CABLE
2.	6K-0806	[2]	STRAP-CABLE
3.	359-9896	[1]	HARNESS AS-ENGINE
	7K-1181	[1]	STRAP-CABLE
		[1]	HARNESS AS-SENSOR
	3E-6446	[1]	CAP AS-CONNECTOR
	110-6844	[1]	SEAL
	9X-3401	[10]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[10]	PIN-CONNECTOR (14-GA TO 16-GA)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
			(EACH PLUG AS INCLUDES)
	126-5011	[1]	SEAL-CONNECTOR
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	237-0227	[1]	PLUG AS-CONNECTOR (3-PIN)
			(EACH PLUG AS INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
	238-8245	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH PLUG AS INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	264-5732	[1]	PLUG AS-CONNECTOR (120-PIN)
	288-7324	[1]	SEAL-CONNECTOR
	281-8803	[1]	PLUG AS-CONNECTOR (3-PIN)
	281-8804	[1]	PLUG AS-CONNECTOR (3-PIN)
			(EACH PLUG AS INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
	160-8124	[1]	PLUG AS (2-PIN)
	8T-8737	[2]	PLUG-SEAL
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[118]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	324-6267	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	9X-3402	[78]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[78]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	305-5362	[4]	TERMINAL AS (18-GA)
	3S-2093	[3]	STRAP-CABLE
	1P-0810 B		TAPE-ELECTRICAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
4.		[1]	COVER AS
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER

#M00655640206

487-2116: HARNESS AS-ENGINE

HARNESS AS-ENGINE

487-2116 HARNESS AS-ENGINE
S/N WYE1-UP
WITHOUT BRAKES
PART OF 343-9066 WIRING GP-UNIT INJECTOR
AN ATTACHMENT

i06286588 M0065564

For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	Y	[1]	HARNESS AS-WIRING (INJECTOR)
	Y		SEPARATE ILLUSTRATION

#M00655640207

367-1758: HARNESS AS-FRONT

HARNESS AS-FRONT

367-1758 HARNESS AS-FRONT -FENDER, RH
S/N 2L61-UP
PART OF 470-4415 WIRING GP-FRONT

i05409402 M0065564

For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS

Part No	Qty	Parts name
155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
264-7033	[1]	SEAL-CONNECTOR
272-2838	[1]	PLUG AS-CONNECTOR (31-PIN)
8T-8737	[17]	PLUG-SEAL
274-3784	[1]	CAP-SEAL
274-3778	[1]	CAP-SEAL
186-3736	[20]	SOCKET-CONNECTOR (16-GA TO 18-GA)
9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
126-1768	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
194-5226	[4]	WIRE AS (16-GA)
		-OR-
194-5227	[4]	WIRE AS (14-GA)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
E		ORDER BY THE CENTIMETER

#M00655640208

396-1133: HARNESS AS-FRONT

HARNESS AS-FRONT

396-1133 HARNESS AS-FRONT
S/N 2L61-UP
PART OF 470-4415 WIRING GP-FRONT

i05408820 M0065564

For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS

Part No	Qty	Parts name
122-6869 G		HOSE-HYDRAULIC (11.1-IN)
126-1767	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
		-OR-
9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
264-7029	[1]	SEAL-CONNECTOR
281-8803	[1]	PLUG AS-CONNECTOR (3-PIN)
264-7030		SEAL-CONNECTOR
102-8804	[1]	KIT-RECEPTACLE (4-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
126-1768	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
E		ORDER BY THE CENTIMETER
G		ORDER BY THE INCH

#M00655640209

423-7678: HARNESS AS-FRONT

HARNESS AS-FRONT

423-7678 HARNESS AS-FRONT -OUTPUT TRANSFER GEAR
S/N 2L61-UP
PART OF 499-5228 GEAR & CASE GP-TRANSFER

i05409397 M0065564

For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS

Part No	Qty	Parts name
155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
264-7030	[1]	SEAL-CONNECTOR
8T-8737	[1]	PLUG-SEAL
8T-8730	[11]	SOCKET-CONNECTOR (16-GA TO 18-GA)
126-1768	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
1P-0810 B		TAPE-ELECTRICAL
B		USE AS REQUIRED

Information:

ELECTRICAL AND STARTING SYSTEM

HARNESS GP

Special Instruction

Cat Production Measurement System (CPM) Installation Procedure for Certain 725C and 730C Articulated Trucks {1408, 1439, 1926, 5057, 7490, 7566, 7601, 7603, 7610, 7620}
Cat Production Measurement System (CPM) Installation Procedure for Certain 725C and 730C Articulated Trucks {1408, 1439, 1926, 5057, 7490, 7566, 7601, 7603, 7610, 7620}

Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408}
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat^® Products Equipped with BR Series Connectors {1408}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Technical Information Bulletin

Wipers Inoperative on Certain 700 Series Articulated Trucks {1408, 7301, 7305}
Wipers Inoperative on Certain 700 Series Articulated Trucks {1408, 7301, 7305}

Payload Harness May Wear on Certain 700 Series Articulated Trucks {1408, 7494}
Payload Harness May Wear on Certain 700 Series Articulated Trucks {1408, 7494}

Service Magazine

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

An Improved Routing for the Column Switch Harness Is Now Used on Certain 700 C-Series Articulated Trucks {1408, 4310, 4338}
An Improved Routing for the Column Switch Harness Is Now Used on Certain 700 C-Series Articulated Trucks {1408, 4310, 4338}

A New Circuit Breaker Assembly is Now Used With the Blower Motor of Certain 700 Series Articulated Trucks {1408, 1417, 1420}
A New Circuit Breaker Assembly is Now Used With the Blower Motor of Certain 700 Series Articulated Trucks {1408, 1417, 1420}

Improved Standard Seat Harness Installation Is Now Used for Certain 700 C and C2 Series Articulated Trucks {1408, 7312, 7324}
Improved Standard Seat Harness Installation Is Now Used for Certain 700 C and C2 Series Articulated Trucks {1408, 7312, 7324}

Improved HVAC Unit is Now Used On Certain 700 Series Articulated Trucks {1408, 7320}
Improved HVAC Unit is Now Used On Certain 700 Series Articulated Trucks {1408, 7320}

Improved Payload Sensor for Monitor Arrangement Is Now Used on Certain 700 Series Articulated Trucks {1408, 1439, 7494}
Improved Payload Sensor for Monitor Arrangement Is Now Used on Certain 700 Series Articulated Trucks {1408, 1439, 7494}

Caterpillar Parts SIS Catalog 725C2 :

493-2542 HARNESS AS-CAB

493-2541 HARNESS AS-CAB

493-2534 HARNESS AS-CAB

487-0460 HARNESS AS-CAB

455-3049 HARNESS AS-CAB

382-7577 HARNESS AS-CAB

382-7576 HARNESS AS-CAB

468-7868 FASTENER GP-WIRING HARNESS

502-6426 HARNESS AS-CAB

424-5545 HARNESS AS-CONTROL

433-0095 HARNESS AS-CONTROL

480-7190 HARNESS AS-CONTROL

367-5453 HARNESS AS-ENGINE

487-2116 HARNESS AS-ENGINE

367-1758 HARNESS AS-FRONT

396-1133 HARNESS AS-FRONT