AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

415-6366 AXLE GP-CENTER S/N 2L61-UP PART OF 462-6584, 464-7252 AXLE AR-CENTER AN ATTACHMENT 725C2 ARTICULATED TRUCK


POWER TRAIN
AXLE GP
BREATHER GP
CONTROL GP-DIFFERENTIAL LOCK
CONTROL GP-TRANSMISSION HYD

ARTICULATED TRUCK 725C2 ARTICULATED TRUCK 2L6
 725C2 Articulated Truck 2L600001-UP (MACHINE) POWERED BY C9.3 Engine M0065564 725C2 2L6   (2016)

POWER TRAIN

AXLE GP
462-6584 AXLE AR-CENTER
464-7252 AXLE AR-CENTER
462-6583 AXLE AR-FRONT
462-6585 AXLE AR-REAR
464-7253 AXLE AR-REAR
AXLE GP-CENTER
415-6366 AXLE GP-CENTER
AXLE GP-FRONT
415-6365 AXLE GP-FRONT
AXLE GP-REAR
415-6367 AXLE GP-REAR
 

#M00655640340
 

415-6366: AXLE GP-CENTER

415-6366 AXLE GP-CENTER
S/N 2L61-UP
PART OF 462-6584, 464-7252 AXLE AR-CENTER
AN ATTACHMENT
i06551928 M0065564
4156366 AXLE GP-CENTER Parts scheme
  For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4608 [32] BOLT (3/4-10X2.75-IN)  
2. 415-6360 Y [2] WHEEL & FINAL DRIVE GP  
3. 8K-6282 [2] GEAR-SUN (17-TEETH)  
4. 127-1960 M [6] SCREW-FLAT HEAD (M6X1X16-MM)  
5. 109-8895 [1] PLATE-IDENTIFICATION (LOGGING SKID)  
6. 188-3777 [1] DISC  
7. 308-6002 [1] YOKE AS  
8. 390-3138 [2] WASHER-THRUST  
9. 493-2482 Y [1] DIFFERENTIAL & BEVEL GEAR GP  
10. 415-6368 [2] SHAFT-AXLE  
11. 416-0630 [2] HUB AS  
    (EACH INCLUDES)
  333-4636 [1] GEAR-SENSOR (40-TEETH)  
  420-5705 [1] SHAFT-GEAR  
  484-0135 [1] HUB  
12. 419-4942 [2] SENSOR GP-SPEED (WHEEL)  
13. 420-2911 [2] INDICATOR  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6H-9691 [1] SEAL-O-RING  
  6V-8399 [1] SEAL-O-RING  
14. 436-1472 [1] HOUSING-AXLE (LH)  
15. 436-1473 [1] HOUSING-AXLE (RH)  
16. 491-3153 Y [2] BRAKE GP-SERVICE  
17. 117-1385 [2] SEAL-O-RING  
18. 202-6473 M [23] BOLT (M16X2X60-MM)  
19. 4F-7391 [1] SEAL-O-RING  
20. 5P-8248 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
21. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
22. 7X-2454 M [1] BOLT (M24X3X110-MM)  
23. 8K-6464 [2] RING-RETAINING  
24. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
25. 8T-4944 M [20] BOLT-SOCKET HEAD (M16X2X40-MM)  
26. 9X-6491 M [23] BOLT (M16X2X150-MM)  
27. 9X-8257 [20] WASHER (17.5X30X3.5-MM THK)  
28. 9X-8268 [46] WASHER (17.5X30X3.5-MM THK)  
29. 481-1108 Y [1] LINES GP-SERVICE BRAKE  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00655640341
 

415-6365: AXLE GP-FRONT

415-6365 AXLE GP-FRONT
S/N 2L61-UP
PART OF 462-6583 AXLE AR-FRONT
i06560673 M0065564
4156365 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4608 [32] BOLT (3/4-10X2.75-IN)  
2. 415-6360 Y [2] WHEEL & FINAL DRIVE GP  
3. 8K-6282 [2] GEAR-SUN (17-TEETH)  
4. 127-1960 M [6] SCREW-FLAT HEAD (M6X1X16-MM)  
5. 109-8895 [1] PLATE-IDENTIFICATION (LOGGING SKID)  
6. 308-6004 [1] YOKE AS  
  7V-3791 [1] GUARD  
7. 390-3138 [2] WASHER-THRUST  
8. 493-2481 Y [1] DIFFERENTIAL & BEVEL GEAR GP  
9. 415-6368 [2] SHAFT-AXLE  
10. 416-0630 [2] HUB AS  
    (EACH INCLUDES)
  333-4636 [1] GEAR-SENSOR (40-TEETH)  
  420-5705 [1] SHAFT-GEAR  
  484-0135 [1] HUB  
11. 419-4942 [2] SENSOR GP-SPEED  
12. 420-2911 [2] INDICATOR (FRONT AXLE)  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6H-9691 [1] SEAL-O-RING  
  6V-8399 [1] SEAL-O-RING  
13. 420-3680 [1] HOUSING-AXLE  
14. 420-3681 [1] HOUSING-AXLE  
15. 491-3153 Y [2] BRAKE GP-SERVICE  
16. 203-3940 [2] SEAL-O-RING  
17. 202-6473 M [23] BOLT (M16X2X60-MM)  
18. 4F-7391 [1] SEAL-O-RING  
19. 5P-8248 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
20. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
21. 8K-6464 [2] RING-RETAINING  
22. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 8T-6868 M [1] BOLT (M12X1.75X80-MM)  
24. 9X-6491 M [23] BOLT (M16X2X150-MM)  
25. 9X-8268 [46] WASHER (17.5X30X3.5-MM THK)  
26. 481-1107 Y [1] LINES GP-SERVICE BRAKE  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00655640342
 

415-6367: AXLE GP-REAR

415-6367 AXLE GP-REAR
S/N 2L61-UP
PART OF 462-6585, 464-7253 AXLE AR-REAR
AN ATTACHMENT
i06551934 M0065564
4156367 AXLE GP-REAR Parts scheme
  For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4608 [32] BOLT (3/4-10X2.75-IN)  
2. 415-6360 Y [2] WHEEL & FINAL DRIVE GP  
3. 8K-6282 [2] GEAR-SUN (17-TEETH)  
4. 109-8895 [1] PLATE-IDENTIFICATION (LOGGING SKID)  
5. 308-6004 [1] YOKE AS  
  7V-3791 [1] GUARD (DIRT)  
6. 493-2483 Y [1] DIFFERENTIAL & BEVEL GEAR GP  
7. 415-6368 [2] SHAFT-AXLE  
8. 420-3682 [1] HOUSING-AXLE  
9. 420-3683 [1] HOUSING-AXLE  
10. 435-7782 [2] HUB  
11. 436-1474 Y [2] BRAKE GP-SERVICE  
12. 202-6473 M [23] BOLT (M16X2X60-MM)  
13. 4F-7391 [1] SEAL-O-RING  
14. 5P-1981 [2] RING-RETAINING  
15. 5P-8248 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
16. 8K-6464 [2] RING-RETAINING  
17. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 8T-6868 M [1] BOLT (M12X1.75X80-MM)  
19. 9X-6491 M [23] BOLT (M16X2X150-MM)  
20. 9X-8268 [46] WASHER (17.5X30X3.5-MM THK)  
21. 481-1109 Y [1] LINES GP-SERVICE BRAKE  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00655640343
 

364-4048: BREATHER GP-POWER TRAIN

364-4048 BREATHER GP-POWER TRAIN
S/N 2L61-UP
PART OF 464-5075 POWER TRAIN AR
i05408761 M0065564
3644048 BREATHER GP-POWER TRAIN Parts scheme
  For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [2] BREATHER (POWER TRAIN)  
2. 6U-0456 [2] STRAP  
3. 8T-9358 [2] CONNECTOR  
4. 189-7495 I [1] HOSE AS  
5. 166-1350 I [1] HOSE AS  
6. 148-8353 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9001 [1] ELBOW  
7. 148-8371 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  8C-8988 [1] ELBOW  
8. 199-6290 [1] ELBOW AS  
  2T-2305 [1] ELBOW  
  6V-8397 [1] SEAL-O-RING  
9. 3J-1907 [2] SEAL-O-RING  
10. 5P-3501 [2] ADAPTER  
11. 6V-8397 [2] SEAL-O-RING  
12. 6V-9168 [2] NUT (11/16-16-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#M00655640344
 

464-1489: BREATHER GP-POWER TRAIN

464-1489 BREATHER GP-POWER TRAIN
S/N 2L61-UP
PART OF 462-6585 AXLE AR-REAR
AN ATTACHMENT
i06563942 M0065564
4641489 BREATHER GP-POWER TRAIN Parts scheme
  For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 449-0744 I [1] HOSE AS  
2. 495-3484 Y [1] BREATHER GP  
3. 148-8354 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-9002 [1] ELBOW  
4. 153-6241 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  8C-8989 [1] ELBOW  
5. 5P-7464 [1] CLIP (SLOT)  
6. 5P-7465 [1] CLIP (TAB)  
7. 6V-1249 [1] GROMMET (22-MM ID)  
8. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4133 M [2] NUT (M10X1.5-THD)  
10. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
11. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00655640345
 

464-2106: BREATHER GP-POWER TRAIN

464-2106 BREATHER GP-POWER TRAIN
S/N 2L61-UP
PART OF 462-6584 AXLE AR-CENTER
AN ATTACHMENT
i06569797 M0065564
4642106 BREATHER GP-POWER TRAIN Parts scheme
  For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-8354 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-9002 [1] ELBOW  
2. 6U-0455 [1] STRAP  
3. 6U-1989 [1] VALVE-RELIEF (BREAKER)  
4. 169-7395 [1] ADAPTER AS  
  6V-8398 [1] SEAL-O-RING  
  156-6129 [1] ADAPTER  
5. 218-0011 I [1] HOSE AS  
6. 466-3667 [1] BRACKET AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
7. 487-5137 [1] BRACKET  
8. 5P-7464 [1] CLIP (SLOT)  
9. 5P-7465 [1] CLIP (TAB)  
10. 6V-1249 [1] GROMMET (22-MM ID)  
11. 6V-9169 [1] NUT (13/16-16-THD)  
12. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
14. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
15. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00655640346
 

464-7255: BREATHER GP-POWER TRAIN

464-7255 BREATHER GP-POWER TRAIN
S/N 2L61-UP
PART OF 464-7252 AXLE AR-CENTER
AN ATTACHMENT
i06563966 M0065564
4647255 BREATHER GP-POWER TRAIN Parts scheme
  For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-8354 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-9002 [1] ELBOW  
2. 6U-0455 [1] STRAP  
3. 6U-1989 [1] VALVE-RELIEF (BREAKER)  
4. 169-7395 [1] ADAPTER AS  
  6V-8398 [1] SEAL-O-RING  
  156-6129 [1] ADAPTER  
5. 396-1672 I [1] HOSE AS  
6. 466-3667 [1] BRACKET AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
7. 487-5137 [1] BRACKET  
8. 5P-7464 [1] CLIP (SLOT)  
9. 5P-7465 [1] CLIP (TAB)  
10. 6V-1249 [1] GROMMET (22-MM ID)  
11. 6V-9169 [1] NUT (13/16-16-THD)  
12. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
14. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
15. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00655640347
 

467-4523: CONTROL GP-DIFFERENTIAL LOCK

467-4523 CONTROL GP-DIFFERENTIAL LOCK
S/N 2L61-UP
PART OF 464-7236, 464-7239 HYDRAULIC AR
AN ATTACHMENT
i06563990 M0065564
4674523 CONTROL GP-DIFFERENTIAL LOCK Parts scheme
  For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-8433 [1] TEE AS  
  6V-8397 [2] SEAL-O-RING  
  6V-9836 [1] TEE-SWIVEL  
2. 6U-0455 [3] STRAP  
3. 132-8567 I [1] HOSE AS  
4. 152-9071 I [2] HOSE AS  
5. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  214-7568 [1] SEAL-O-RING  
7. 290-5562 [1] MOUNT (DUAL SWIVEL)  
8. 432-1661 [1] VALVE & MTG GP-DIFF LOCK  
  6E-5066 [2] SCREEN (HYDRAULIC)  
  393-1012 J [1] VALVE GP-SOLENOID (24-VDC)(DIFFERENTIAL LOCK)  
9. 447-0296 I [1] HOSE AS  
10. 454-7441 [1] TUBE AS  
11. 509-0011 [1] TUBE AS  
12. 454-8212 [1] TUBE AS  
13. 509-0013 [1] TUBE AS  
14. 488-4889 I [1] HOSE AS  
15. 489-4227 I [1] HOSE AS  
16. 148-8367 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
17. 148-8371 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  8C-8988 [1] ELBOW  
18. 148-8374 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8723 [1] ELBOW  
19. 148-8378 [3] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
20. 148-8383 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8T-1683 [1] ELBOW  
21. 155-3502 [1] ADAPTER AS  
  3E-7403 [1] ADAPTER  
  6V-8398 [1] SEAL-O-RING  
23. 5P-7462 [1] CLIP (SLOT)  
24. 5P-7463 [1] CLIP (TAB)  
25. 6V-0683 [1] GROMMET  
26. 6V-0852 [1] CAP-DUST  
27. 6V-8397 [6] SEAL-O-RING  
28. 6V-9168 [2] NUT (11/16-16-THD)  
29. 7X-7729 [2] WASHER (11X25X3-MM THK)  
30. 8T-1887 [8] CLIP (SLOT)  
31. 8T-1888 [8] CLIP (TAB)  
32. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
34. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
35. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
37. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
38. 8W-8909 [8] SLEEVE  
39. 5P-8939 [2] GROMMET  
40. 8T-1890 [2] CLIP (TAB)  
41. 8T-1889 [2] CLIP (SLOT)  
   
    AVAILABLE REPAIR KIT(S):
  508-9040 J [1] KIT-SEAL  
    (INCLUDES O-RING SEALS)
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#M00655640348
 

469-2308: CONTROL GP-DIFFERENTIAL LOCK

469-2308 CONTROL GP-DIFFERENTIAL LOCK
S/N 2L61-UP
PART OF 465-1348 HYDRAULIC AR
i06551891 M0065564
4692308 CONTROL GP-DIFFERENTIAL LOCK Parts scheme
  For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-3056 [1] TEE AS  
  6V-8397 [3] SEAL-O-RING  
  6V-8788 [1] TEE  
2. 6U-0455 [3] STRAP  
3. 6U-0456 [1] STRAP  
4. 148-8464 I [1] HOSE AS  
5. 276-5394 I [1] HOSE AS  
6. 290-5562 [1] MOUNT (DUAL SWIVEL)  
7. 297-7930 [1] TEE AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  297-7929 [1] TEE  
8. 428-7255 I [1] HOSE AS  
9. 432-1661 [1] VALVE & MTG GP-DIFF LOCK  
  6E-5066 [2] SCREEN (HYDRAULIC)  
  393-1012 [1] VALVE GP-SOLENOID (24-VDC)(DIFFERENTIAL LOCK)  
10. 444-6795 [1] TUBE AS  
11. 445-9936 [1] PLATE AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
12. 446-1855 [1] BRACKET AS  
  9R-2672 M [1] BOSS-THREADED (M10X1.5X120-MM)  
13. 473-9419 [1] TUBE AS  
15. 164-5605 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8T-0076 [1] CONNECTOR  
16. 148-8336 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
17. 148-8374 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8723 [1] ELBOW  
18. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
  148-8439 [1] TEE AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [2] SEAL-O-RING  
  6V-8774 [1] TEE  
20. 150-4050 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  8T-0788 [1] ELBOW  
21. 2R-1866 [2] CLAMP  
22. 3S-8665 [1] CLIP (LOOP)  
23. 5P-7462 [1] CLIP (SLOT)  
24. 5P-7463 [1] CLIP (TAB)  
25. 6V-0683 [1] GROMMET  
27. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
29. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
30. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
31. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
32. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 8T-4956 M [1] BOLT (M12X1.75X35-MM)  
34. 494-1931 [1] ADAPTER GP-MOUNTING  
  6V-9168 [2] NUT (11/16-16-THD)  
  9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
  149-5452 [2] UNION AS (STRAIGHT)  
    (EACH INCLUDES)
  6V-8397 [2] SEAL-O-RING  
  6V-8994 [1] UNION (STRAIGHT)  
  487-4301 [1] BRACKET AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00655640349
 

447-7310: CONTROL GP-TRANSMISSION HYD

447-7310 CONTROL GP-TRANSMISSION HYD
S/N TLP1-UP
PART OF 420-0615 TRANSMISSION AR
i05451829 M0065564
4477310 CONTROL GP-TRANSMISSION HYD Parts scheme 4477310 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your 725C2 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-6341 [2] SEAL  
2. 2H-6184 [1] SEAL-O-RING  
3. 2P-1692 [1] SEAL-O-RING  
4. 6D-7889 [6] SEAL-O-RING  
5. 6V-0852 [10] CAP-DUST  
6. 8T-7000 [2] SEAL  
7. 9M-9545 [1] SEAL-O-RING  
8. 124-9401 [1] CLIP (TAB)  
9. 134-2252 Y [1] SENSOR GP-TEMPERATURE (8-VOLT)(ENGINE COOLANT)  
10. 149-0978 Y [1] VALVE GP-RETARDER HYD CONTROL  
11. 171-1526 [1] GUARD  
12. 172-7970 Y [1] VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL)  
13. 180-3178 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
14. 183-9358 [1] PLATE  
15. 191-8305 [2] SENSOR GP-SPEED (TRANSMISSION OUTPUT)  
    (EACH INCLUDES)
  137-6645 [1] PAD-CONNECTOR  
16. 209-6632 Y [1] VALVE GP-BYPASS  
17. 214-7568 [1] SEAL-O-RING  
18. 230-3166 [1] VALVE GP-RELIEF (TORQUE CONVERTER OUTLET)  
19. 244-3114 Y [6] VALVE GP-MODULATING (24-VOLT)  
20. 245-1158 Y [1] HARNESS AS-TRANSMISSION  
21. 245-1159 [1] BRACKET  
22. 246-2584 [1] BRACKET AS  
23. 315-9835 [3] ELBOW AS  
    (EACH INCLUDES)
  6V-0484 [1] ELBOW  
  214-7568 [1] SEAL-O-RING  
24. 318-1181 Y [1] SENSOR GP-SPEED (MAGNETIC)  
25. 318-1182 Y [1] SENSOR GP-SPEED (TRANSMISSION)  
26. 369-3540 [1] PLATE  
27. 447-7288 [1] BRACKET AS  
  7T-1099 [1] LINK  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
28. 117-1385 [2] SEAL-O-RING  
29. 130-5300 [2] CLIP  
30. 132-5789 [9] CLIP (LADDER)  
31. 3S-2093 [22] STRAP-CABLE  
32. 4B-1226 [1] SCREW-MACHINE (10-24X6.35-MM)  
33. 4P-7428 [1] CLIP (LADDER)  
34. 4P-7429 [2] CLIP (LADDER)  
35. 4P-7581 [6] CLIP (LADDER)  
36. 5P-8245 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
37. 5P-8347 M [10] BOLT (M8X1.25X70-MM)  
38. 5P-9085 [3] CLIP (LOOP)  
39. 6A-5591 M [1] BOLT (M12X1.75X25-MM)  
40. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
41. 6V-5215 M [5] BOLT (M8X1.25X16-MM)  
42. 6V-5839 [7] WASHER (11X21X2.5-MM THK)  
43. 6V-8455 M [7] BOLT (M10X1.5X16-MM)  
44. 8M-1112 [1] SEAL-O-RING  
45. 8T-0100 M [12] BOLT (M8X1.25X60-MM)  
46. 8T-0106 M [4] BOLT (M12X1.75X100-MM)  
47. 9M-1974 [28] WASHER-HARD (8.8X16X2-MM THK)  
48. 9X-4609 [1] SEAL-O-RING  
49. 9X-8268 [2] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Frame and Body - Inspect
725C2 Articulated Truck
Axle Breathers - Clean/Replace
725C2 Articulated Truck
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Procedure to Install the Front Axle Grease Line Protective Cover on 725C, 730C, 730C Ejector, 725C2, 730C2, and 730C2 Ejector Articulated Trucks {0679, 3013, 3278, 3282, 7150, 7510, 7540, 795C}
Procedure to Install the Front Axle Grease Line Protective Cover on 725C, 730C, 730C Ejector, 725C2, 730C2, and 730C2 Ejector Articulated Trucks {0679, 3013, 3278, 3282, 7150, 7510, 7540, 795C}
Procedure to Modify the Cross Axle Differential Lock to Reduce Traction Control Noise for Certain 730C, 730C EJ, 725C2, 730C2, and 730C2 EJ Articulated Trucks {3016, 3264, 5057, 7490, 7610, 7620}
Procedure to Modify the Cross Axle Differential Lock to Reduce Traction Control Noise for Certain 730C, 730C EJ, 725C2, 730C2, and 730C2 EJ Articulated Trucks {3016, 3264, 5057, 7490, 7610, 7620}
Specifications
Rear Axle
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems
Rear Axle
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems
Rear Axle
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Thermal Spray Procedures for ADT Spindle and Wheel Bearing Bores {0679, 4205, 4215}
Thermal Spray Procedures for ADT Spindle and Wheel Bearing Bores {0679, 4205, 4215}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Testing and Adjusting
Brake Line Pressure for Front Axle - Test
725C, 725C2, 730C and 730C2 Articulated Truck Systems
Brake Line Pressure for Center and Rear Axle - Test
725C, 725C2, 730C and 730C2 Articulated Truck Systems
Troubleshooting
Differential and Final Drive
725C2, 730C, 730C EJECTOR, 730C2 and 730C2 EJECTOR Articulated Trucks
Cross Axle Lock Speed Is Mismatched
725C2, 730C, 730C EJECTOR, 730C2 and 730C2 EJECTOR Articulated Trucks
Interaxle Lock Speed Is Mismatched
725C2, 730C, 730C EJECTOR, 730C2 and 730C2 EJECTOR Articulated Trucks
Interaxle Lock Supply Pressure Is High
725C2, 730C, 730C EJECTOR, 730C2 and 730C2 EJECTOR Articulated Trucks
Interaxle Lock Supply Pressure Is Low
725C2, 730C, 730C EJECTOR, 730C2 and 730C2 EJECTOR Articulated Trucks
Disassembly and Assembly
Axle Shaft - Remove
730C2 and 725C2 Articulated Truck Power Train
Axle Shaft - Install
730C2 and 725C2 Articulated Truck Power Train
Service Brake - Remove and Install
725C2 and 730C2 Articulated Truck Machine System
Service Brakes - Remove and Install - Center Axle
730C2 and 725C2 Articulated Truck Power Train
Center Axle Yoke - Remove and Install
730C2 and 725C2 Articulated Truck Power Train
Center Axle Yoke - Disassemble
730C2 and 725C2 Articulated Truck Power Train
Center Axle Yoke - Assemble
730C2 and 725C2 Articulated Truck Power Train
Differential Pinion - Disassemble - Front and Rear
730C2 and 725C2 Articulated Truck Power Train
Differential Pinion - Assemble - Front and Rear
730C2 and 725C2 Articulated Truck Power Train
Rear Axle - Remove and Install
730C2 and 725C2 Articulated Truck Power Train
Center Axle - Remove and Install
730C2 and 725C2 Articulated Truck Power Train
Front Axle - Remove and Install
730C2 and 725C2 Articulated Truck Power Train
Service Brakes - Remove and Install - Rear axle
730C2 and 725C2 Articulated Truck Power Train
Service Brakes - Remove and Install - Front axle
730C2 and 725C2 Articulated Truck Power Train
Axle Oil Cooler Pump and Motor - Remove and Install - Center Axle Oil Cooler Pump and Motor
730C2 and 725C2 Articulated Truck Power Train
Axle Oil Cooler Pump and Motor - Remove and Install - Front Axle Oil Cooler Pump and Motor
730C2 and 725C2 Articulated Truck Power Train
Wheel Spindle - Remove and Install - Final Drive Duo-Cone
730C2 and 725C2 Articulated Truck Power Train
Service Magazine
A New Procedure to Install the Front Axle Grease Line Protective Cover Is Now Available on Certain C & C2 Series Articulated Trucks {0679, 3013, 3278, 3282, 7150, 7450, 7510, 795C}
A New Procedure to Install the Front Axle Grease Line Protective Cover Is Now Available on Certain C & C2 Series Articulated Trucks {0679, 3013, 3278, 3282, 7150, 7450, 7510, 795C}
Procedure is Now Available to Modify the Cross Axle Differential Lock to Reduce Traction Control Noise for Certain 730C/C2, 730C/C2 EJ, and 725C2 Articulated Trucks {3016, 3264, 5057, 7490, 7610, 7620}
Procedure is Now Available to Modify the Cross Axle Differential Lock to Reduce Traction Control Noise for Certain 730C/C2, 730C/C2 EJ, and 725C2 Articulated Trucks {3016, 3264, 5057, 7490, 7610, 7620}

Caterpillar Parts SIS Catalog 725C2 :

464-7253 AXLE AR-REAR
462-6585 AXLE AR-REAR
462-6583 AXLE AR-FRONT
464-7252 AXLE AR-CENTER
462-6584 AXLE AR-CENTER
ACCUMULATOR GP
172-2412 ACCUMULATOR GP
WIRING GP-UNIT INJECTOR
343-9066 WIRING GP-UNIT INJECTOR
WIRING GP-SENSOR
480-7623 WIRING GP-SENSOR
AXLE GP-FRONT
415-6365 AXLE GP-FRONT
AXLE GP-REAR
415-6367 AXLE GP-REAR
BREATHER GP-POWER TRAIN
364-4048 BREATHER GP-POWER TRAIN
BREATHER GP-POWER TRAIN
464-1489 BREATHER GP-POWER TRAIN
BREATHER GP-POWER TRAIN
464-2106 BREATHER GP-POWER TRAIN
BREATHER GP-POWER TRAIN
464-7255 BREATHER GP-POWER TRAIN
CONTROL GP-DIFFERENTIAL LOCK
467-4523 CONTROL GP-DIFFERENTIAL LOCK
CONTROL GP-DIFFERENTIAL LOCK
469-2308 CONTROL GP-DIFFERENTIAL LOCK
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.