AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

509-8397 KIT-JOYSTICK CONTROL S/N B8P1-UP CUSTOM 966M XE WHEEL LOADER


OPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC
MONITOR GP
SEAT GP
LATCH GP
CAB GP
AIR CONDITIONER GP

WHEEL LOADER 966M XE WHEEL LOADER B8P
 966M XE Wheel Loader B8P00001-UP (MACHINE) POWERED BY C9.3 Engine M0065614 966M XE B8P   (2016)

OPERATOR STATION

CONTROL GP-ELECTROHYDRAULIC
KIT-JOYSTICK CONTROL
509-8393 KIT-JOYSTICK CONTROL
KIT-JOYSTICK CONTROL
509-8395 KIT-JOYSTICK CONTROL
KIT-JOYSTICK CONTROL
509-8397 KIT-JOYSTICK CONTROL
KIT-JOYSTICK CONTROL
513-1140 KIT-JOYSTICK CONTROL
 

#M00656141380
 

509-8397: KIT-JOYSTICK CONTROL

509-8397 KIT-JOYSTICK CONTROL
S/N B8P1-UP
CUSTOM
i07034740 M0065614
5098397 KIT-JOYSTICK CONTROL Parts scheme
  For full view, you need register

Parts for your 966M XE WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 458-8675 HY [1] CONTROL GP-JOYSTICK (4-VALVE)  
2. 285-8017 H [1] FILM-IDENTIFICATION (JOYSTICK CONTROL, 4-FUNCTION)  
3. 112-6646 HM [4] LOCKNUT (M6X1-THD)  
4. 9X-2043 HM [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
  H   FROM CONTROL & MTG GP-ELHYD
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00656141381
 

513-1140: KIT-JOYSTICK CONTROL

513-1140 KIT-JOYSTICK CONTROL
S/N B8P1-UP
CUSTOM
i07034992 M0065614
5131140 KIT-JOYSTICK CONTROL Parts scheme
  For full view, you need register

Parts for your 966M XE WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 L [17] STRAP-CABLE  
2. 7K-1181 L [1] STRAP-CABLE  
3. 201-1531 H [1] FILM-IDENTIFICATION (AUTODIG)  
4. 268-6497 H [1] FILM-IDENTIFICATION (PAYLOAD STORE)  
5. 278-8844 L [1] PLUG AS-CONNECTOR  
  8T-8737 [2] PLUG-SEAL  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  455-0704 [1] SEAL-CONNECTOR  
6. 305-3458 J [1] CUSHION AS  
7. 337-9106 J [1] COVER  
8. 392-7082 J [1] COVER AS  
9. 423-7784 J [1] BRACKET AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
10. 449-4002 J [1] FILM-IDENTIFICATION (PEDAL LOCK)  
11. 503-4248 LY [1] HARNESS AS-OPERATOR CONTROLS (JOYSTICK)  
12. 091-8792 L [1] CLIP  
13. 0A-4664 L [2] CLIP  
14. 127-2170 LM [5] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
15. 230-5010 L [1] PLUG AS-CONNECTOR (6-PIN)  
16. 239-7352 L [1] PLUG AS-CONNECTOR (6-PIN)  
    (EACH PLUG AS INCLUDES)
  455-0707 [1] SEAL-CONNECTOR  
17. 3E-4352 L [3] WASHER-HARD (8.8X20.5X2.5-MM THK)  
18. 5C-2890 JM [3] NUT (M6X1-THD)  
19. 7C-4354 L [3] CLIP  
20. 8R-3695 J [4] GROMMET  
21. 8T-4197 JM [1] BOLT (M8X1.25X40-MM)  
22. 8T-4205 J [3] WASHER-HARD (7.2X14.5X2-MM THK)  
23. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
24. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
25. 9X-2043 JM [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
26. 9X-2044 LM [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  H   FROM MONITOR AR-PAYLOAD
  J   FROM CONTROL & MTG GP-ELHYD
  L   FROM WIRING GP-CONTROL
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00656141382
 

435-3406: KIT-PAYLOAD CONTROL

435-3406 KIT-PAYLOAD CONTROL
S/N B8P1-UP
CUSTOM
i05735383 M0065614
4353406 KIT-PAYLOAD CONTROL Parts scheme 4353406 KIT-PAYLOAD CONTROL Parts scheme 4353406 KIT-PAYLOAD CONTROL Parts scheme
  For full view, you need register

Parts for your 966M XE WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 201-1531 [1] FILM-IDENTIFICATION (AUTODIG)  
2. 268-6497 [1] FILM-IDENTIFICATION (PAYLOAD STORE)  
3. 332-2155 [1] SWITCH AS-PUSH BUTTON (AUTODIG)  
3A. 332-2155 [1] SWITCH AS-PUSH BUTTON (PAYLOAD STORE)  
    (EACH SWITCH AS INCLUDES)
  6F-0253 [1] LOCKWASHER  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  172-3511 [1] NUT (5/8-24-THD)  
4. 349-1178 [2] SENSOR-PRESSURE  
5. 164-6874 [1] FITTING AS-ELBOW (QUICK DISCONNECT, MALE)  
  3J-1907 [1] SEAL-O-RING  
  085-7356 [1] FITTING  
6. 3J-1907 [2] SEAL-O-RING  
   
    THIS KIT PROVIDES NECESSARY COMPONETS FOR A FIELD INSTALLED PCS & AUTODIG FOR MEDIUM WHEEL LOADER MACHINES
 

#M00656141383
 

483-5477: KIT-PRINTER

483-5477 KIT-PRINTER
S/N B8P1-UP
CUSTOM
i07189408 M0065614
4835477 KIT-PRINTER Parts scheme
  For full view, you need register

Parts for your 966M XE WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 156-6175 H [1] CLIP (LADDER)  
2. 206-1345 H [1] STRAP-CABLE  
3. 259-4399 S [2] BASE  
4. 269-2556 H [4] SCREW-PAN HEAD (8-32X0.375-IN)  
5. 270-3311 S [1] CLAMP  
6. 346-1083 H [1] HARNESS AS-WIRING (PRINTER)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  8T-8737 [2] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  135-5009 E TUBE-HEAT SHRINK (32-MM DIA)(5-CM)  
7. 3E-8020 HM [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
8. 537-5523 H [1] PRINTER GP-COMPUTER  
9. 7K-1181 H [1] STRAP-CABLE  
  E   ORDER BY THE CENTIMETER
  H   FROM PRINTER GP-COMPUTER
  M   METRIC PART
  S   FROM BRACKET GP-MOUNTING
 

#M00656141384
 

467-0160: KIT-SEAT COVER

467-0160 KIT-SEAT COVER
S/N B8P1-UP
BLACK & ASPHALT GRAY
i06738271 M0065614
  For full view, you need register

Parts for your 966M XE WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (INCLUDES BACK CUSHION COVER, HEADREST COVER, SEAT CUSHION COVER)
 

#M00656141385
 

446-0636: KIT-SEAT CUSHION

446-0636 KIT-SEAT CUSHION -CLOTH
S/N B8P1-UP
PART OF 421-1227 SEAT GP-SUSPENSION
i06210581 M0065614
4460636 KIT-SEAT CUSHION Parts scheme
  For full view, you need register

Parts for your 966M XE WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-1276 [2] TUBE  
2. 164-1277 [2] CLIP-SPRING  
3. 345-8056 [1] CUSHION AS-SEAT (BACK, CLOTH)  
4. 443-8574 [1] CUSHION AS-SEAT  
5. 385-0229 [7] SCREW-FORMING (12-16X0.75-IN)  
6. 385-0230 [4] SCREW-FORMING (1/4-15-1-IN)  
   
    (KIT ALSO INCLUDES SEAT PAN & OPERATOR STATION HARNESS)
 

#M00656141386
 

373-3913: LATCH GP-ACCESS DOOR

373-3913 LATCH GP-ACCESS DOOR -DOOR RELEASE, REMOTE
S/N B8P1-UP
PART OF 372-2109 DISTRIBUTION AR
i05448229 M0065614
3733913 LATCH GP-ACCESS DOOR Parts scheme
  For full view, you need register

Parts for your 966M XE WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 372-1607 Y [1] WIRING GP-ACTUATOR CONTROL  
2. 373-1939 Y [1] SWITCH GP-TOGGLE  
  Y   SEPARATE ILLUSTRATION
 

#M00656141387
 

361-7166: LINER GP-CAB

361-7166 LINER GP-CAB
S/N B8P1-UP
PART OF 366-0725, 505-5842, 562-6160 CAB AR
i05501831 M0065614
3617166 LINER GP-CAB Parts scheme 3617166 LINER GP-CAB Parts scheme
  For full view, you need register

Parts for your 966M XE WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 466-1621 [2] HOOK-COAT  
2. 206-1667 [4] CLIP (TRIM)  
3. 209-0746 [2] STRAP  
4. 365-8361 [1] LINER AS-CAB  
5. 365-8362 [1] HEADLINER  
6. 365-8363 [1] BEZEL-RADIO  
7. 9X-2038 [2] WASHER (7X19X2-MM THK)  
8. 114-6658 [6] WASHER (6.5X17X1-MM THK)  
9. 365-8373 [10] FASTENER  
10. 9X-2045 M [8] SCREW-TRUSS HEAD (M6X1X20-MM)  
11. 3E-8020 M [2] SCREW-TRUSS HEAD (M6X1X25-MM)  
  M   METRIC PART
 

#M00656141388
 

364-9903: LINES GP-AIR CONDITIONER

364-9903 LINES GP-AIR CONDITIONER
S/N B8P1-UP
PART OF 386-0945, 506-4553 CONFIGURATION AR
Type 1
i06534226 M0065614
3649903 LINES GP-AIR CONDITIONER Parts scheme
  For full view, you need register

Parts for your 966M XE WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 091-0081 C [2] SPACER (10.5X20X10-MM THK)  
2. 124-3019 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
3. 149-6371 [1] SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(AIR CONDITIONER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
5. 320-8863 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
6. 327-0282 [3] SEAL-INTEGRAL (1/2-IN)  
7. 327-0283 [1] SEAL-INTEGRAL (3/4-IN)  
8. 355-3148 [1] SWITCH AS-PRESSURE (HIGH, LOW)(AIR CONDITIONER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 499-3889 I [1] HOSE AS  
10. 499-3890 I [1] HOSE AS  
11. 499-3888 I [1] HOSE AS  
12. 5P-3929 [1] COUPLING AS-REFRIGERANT (SELF-SEALING)  
13. 5P-3948 [1] COUPLING AS-REFRIGERANT (SELF-SEALING)  
14. 067-2551 [7] CLIP  
15. 133-6934 [1] SPACER (11X20X25-MM THK)  
16. 146-5067 [1] SPACER (13X30X22.2-MM THK)  
17. 172-4211 [1] SPACER (10.5X22X50.8-MM THK)  
18. 175-9079 M [1] ROD-LINK  
19. 178-3336 M [4] NUT-HEX FLANGE (M8X1.25-THD)  
20. 2M-6102 [1] PIPE  
21. 303-9449 M [1] STUD (M10X1.5-THD)  
22. 3P-2404 [2] CLIP  
23. 3S-2093 [7] STRAP-CABLE  
24. 4D-7388 [1] CLIP (LOOP)  
25. 5K-5338 [7] CLIP (LOOP)  
26. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
27. 6V-1889 [2] CLIP (LOOP)  
29. 7X-7729 C [1] WASHER (11X25X3-MM THK)  
30. 8T-4121 C [17] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4133 M [4] NUT (M10X1.5-THD)  
32. 8T-4136 CM [2] BOLT (M10X1.5X25-MM)  
33. 8T-4137 CM [3] BOLT (M10X1.5X20-MM)  
34. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
35. 8T-4195 CM [3] BOLT (M10X1.5X30-MM)  
36. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
37. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
38. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
39. 9R-1004 [1] CLIP (TAB)  
40. 9R-1005 [1] CLIP (SLOT)  
41. 9X-7378 [2] SEAL-O-RING  
42. 9X-7383 [1] SEAL-O-RING  
43. 9X-7384 [1] SEAL-O-RING  
44. 8C-5064 E CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(72-CM)  
44A. 8C-5064 E CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(43-CM)  
44B. 8C-5064 E CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(27-CM)  
45. 172-6833 [2] CLIP (LOOP)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#M00656141389
 

364-9903: LINES GP-AIR CONDITIONER

364-9903 LINES GP-AIR CONDITIONER
S/N B8P1-UP
PART OF 386-0945, 506-4553 CONFIGURATION AR
Type 2
i07331420 M0065614
3649903 LINES GP-AIR CONDITIONER Parts scheme
  For full view, you need register

Parts for your 966M XE WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [7] STRAP-CABLE  
2. 5P-3929 [1] COUPLING AS-REFRIGERANT (SELF-SEALING)  
3. 5P-3948 [1] COUPLING AS-REFRIGERANT (SELF-SEALING)  
4. 7K-1181 C [2] STRAP-CABLE  
5. 091-0081 [2] SPACER (10.5X20X10-MM THK)  
6. 124-3019 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
7. 149-6371 [1] SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(AIR CONDITIONER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
8. 206-2423 C [1] SADDLE-MOUNTING  
9. 294-5076 C [1] PLATE AS  
10. 320-8863 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
11. 327-0282 [3] SEAL-INTEGRAL (1/2-IN)  
12. 327-0283 [1] SEAL-INTEGRAL (3/4-IN)  
13. 355-3148 [1] SWITCH AS-PRESSURE (HIGH, LOW)(AIR CONDITIONER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
14. 499-3888 I [1] HOSE AS  
15. 499-3889 I [1] HOSE AS  
16. 499-3890 I [1] HOSE AS  
17. 067-2551 [7] CLIP  
18. 144-8344 C [1] SPACER (11X19X20-MM THK)  
19. 160-8742 CM [1] BOLT (M10X1.5X55-MM)  
20. 172-4211 [1] SPACER (10.5X22X50.8-MM THK)  
21. 172-6833 [2] CLIP (LOOP)  
22. 175-9079 M [1] ROD-LINK  
23. 178-3336 M [4] NUT-HEX FLANGE (M8X1.25-THD)  
24. 2M-6102 [1] PIPE  
25. 303-9449 M [1] STUD (M10X1.5-THD)  
26. 3P-2404 C [1] CLIP  
27. 4D-7388 [1] CLIP (LOOP)  
28. 5K-5338 [7] CLIP (LOOP)  
29. 6V-1889 C [3] CLIP (LOOP)  
30. 7X-7729 [1] WASHER (11X25X3-MM THK)  
31. 8T-4121 C [19] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4133 M [4] NUT (M10X1.5-THD)  
33. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
34. 8T-4137 CM [4] BOLT (M10X1.5X20-MM)  
35. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
36. 8T-4196 CM [2] BOLT (M10X1.5X35-MM)  
37. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
38. 9R-1004 [1] CLIP (TAB)  
39. 9R-1005 [1] CLIP (SLOT)  
40. 9X-7378 [2] SEAL-O-RING  
41. 9X-7383 [1] SEAL-O-RING  
42. 9X-7384 [1] SEAL-O-RING  
43. 8C-5064 E CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(43-CM)  
43A. 8C-5064 E CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(72-CM)  
43B. 8C-5064 E CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(27-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Special Instruction
Installation of <NOBR>435-3400</NOBR> Joystick Control Kit {1408, 5702, 5705}
Installation of 435-3400 Joystick Control Kit {1408, 5702, 5705}
Installation of <NOBR>435-3401</NOBR> Electrohydraulic Control and Mounting Gp Field Install Kit {5702, 7960}
Installation of 435-3401 Electrohydraulic Control and Mounting Gp Field Install Kit {5702, 7960}
Installation of <NOBR>435-3796</NOBR> Joystick Kit Field Install Kit {1408, 5702, 5705}
Installation of 435-3796 Joystick Kit Field Install Kit {1408, 5702, 5705}
Installation Procedure for the 435-3402 Joystick Control Kit on Certain Medium Wheel Loaders {1408, 5702, 5702, 5705}
Installation Procedure for the 435-3402 Joystick Control Kit on Certain Medium Wheel Loaders {1408, 5702, 5702, 5705}
Installation of Four Point Seat Belt on Certain Medium Wheel Loaders with Left-Hand Steering Device {1408, 5258, 5702, 7312, 7324, 7327}
Installation of Four Point Seat Belt on Certain Medium Wheel Loaders with Left-Hand Steering Device {1408, 5258, 5702, 7312, 7324, 7327}
Installation of Four Point Seat Belt on Certain Medium Wheel Loaders with Steering Wheel {1408, 5258, 5702, 7312, 7324, 7327}
Installation of Four Point Seat Belt on Certain Medium Wheel Loaders with Steering Wheel {1408, 5258, 5702, 7312, 7324, 7327}
Procedure to Convert Joystick to Single Axis Levers on Certain Medium Wheel Loaders {1408, 5702, 5705, 7490, 7610, 7620}
Procedure to Convert Joystick to Single Axis Levers on Certain Medium Wheel Loaders {1408, 5702, 5705, 7490, 7610, 7620}
Procedure to Install Two Valve to Three Valve Hydraulic Conversion Kit and Two Valve to Four Valve Hydraulic Conversion Kit on Certain 966M and 972M Wheel Loader {0679, 1408, 5051, 5057, 5063, 5705, 7610, 7620}
Procedure to Install Two Valve to Three Valve Hydraulic Conversion Kit and Two Valve to Four Valve Hydraulic Conversion Kit on Certain 966M and 972M Wheel Loader {0679, 1408, 5051, 5057, 5063, 5705, 7610, 7620}
Procedure to Install Two, Three, or Four Heavy-Duty Joystick Controls on Certain M Series Medium Wheel Loaders {1408, 5702, 5705}
Procedure to Install Two, Three, or Four Heavy-Duty Joystick Controls on Certain M Series Medium Wheel Loaders {1408, 5702, 5705}
Procedure to Install Three Valve and Four Valve Heavy Duty Single Axis Levers on Certain M Series Medium Wheel Loaders {5063, 5705, 5734}
Procedure to Install Three Valve and Four Valve Heavy Duty Single Axis Levers on Certain M Series Medium Wheel Loaders {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>&reg;</SUP> Products {5063, 5705, 5734}
Procedure to Service Boot on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}
Procedure to Change the Implement Control Pattern for Certain Medium Wheel Loaders {5702, 7405, 7557}
Procedure to Change the Implement Control Pattern for Certain Medium Wheel Loaders {5702, 7405, 7557}
Specifications
Electrohydraulic Control - Support
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Electrohydraulic Control - Control Adjuster Group
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Electrohydraulic Control - Mounting
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Electrohydraulic Control
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Electrohydraulic Control - Mounting
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Systems Operation
Electrohydraulic Control
966M XE and 972M XE Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Disassembly and Assembly
Electrohydraulic Steering Control (Joystick) - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
Service Magazine
An Improved Multi-Function Joystick is Now Available for Certain Cat<SUP>&reg;</SUP> Machines {5063, 5702, 5705}
An Improved Multi-Function Joystick is Now Available for Certain Cat® Machines {5063, 5702, 5705}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat<SUP>&reg;</SUP> Products {5063, 5705, 5734}
New Boot Kit Is Now Used on the Single Axis Lever (SAL) Handle Control Group of Certain Cat® Products {5063, 5705, 5734}

Caterpillar Parts SIS Catalog 966M XE :

KIT-JOYSTICK CONTROL
509-8395 KIT-JOYSTICK CONTROL
KIT-JOYSTICK CONTROL
509-8393 KIT-JOYSTICK CONTROL
KIT-JOYSTICK CONTROL
509-8391 KIT-JOYSTICK CONTROL
KIT-JOYSTICK CONTROL
509-8389 KIT-JOYSTICK CONTROL
KIT-JOYSTICK CONTROL
509-8230 KIT-JOYSTICK CONTROL
KIT-JOYSTICK CONTROL
509-8228 KIT-JOYSTICK CONTROL
KIT-JOYSTICK CONTROL
509-8196 KIT-JOYSTICK CONTROL
KIT-JOYSTICK CONTROL
491-9604 KIT-JOYSTICK CONTROL
KIT-JOYSTICK CONTROL
513-1140 KIT-JOYSTICK CONTROL
KIT-PAYLOAD CONTROL
435-3406 KIT-PAYLOAD CONTROL
KIT-PRINTER
483-5477 KIT-PRINTER
467-0160 KIT-SEAT COVER
KIT-SEAT CUSHION
446-0636 KIT-SEAT CUSHION
LATCH GP-ACCESS DOOR
373-3913 LATCH GP-ACCESS DOOR
LINER GP-CAB
361-7166 LINER GP-CAB
LINES GP-AIR CONDITIONER
364-9903 LINES GP-AIR CONDITIONER
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.