AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

460-0860 WIRING GP-VALVE S/N XAJ1-UP PART OF 457-5960, 459-1160 VALVE AR-MAIN CONTROL, 460-0861 WIRING GP-VALVE 352F XE VG


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 352F XE VG EXCAVATOR XAJ
 352F XE VG Excavator XAJ00001-UP (MACHINE) POWERED BY C13 Engine M0065634 352F XE VG XAJ   (2016)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-SENSOR
349-6154 WIRING GP-SENSOR
WIRING GP-UNIT INJECTOR
345-6734 WIRING GP-UNIT INJECTOR
WIRING GP-VALVE
460-0860 WIRING GP-VALVE
WIRING GP-VALVE
460-0861 WIRING GP-VALVE
WIRING GP-VALVE
489-0499 WIRING GP-VALVE
 

#M00656340460
 

460-0860: WIRING GP-VALVE

460-0860 WIRING GP-VALVE
S/N XAJ1-UP
PART OF 457-5960, 459-1160 VALVE AR-MAIN CONTROL, 460-0861 WIRING GP-VALVE
i06140610 M0065634
4600860 WIRING GP-VALVE Parts scheme 4600860 WIRING GP-VALVE Parts scheme
  For full view, you need register

Parts for your 352F XE VG EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [12] STRAP-CABLE  
2. 134-3771 [4] SPACER (12.52X17.14X114-MM THK)  
3. 274-3780 [2] CAP-SEAL  
4. 357-8318 [1] HARNESS AS-VALVE  
  7K-1181 [4] STRAP-CABLE  
  233-2106 [4] COLLAR  
  5P-6006 D TUBE-HEAT SHRINK (9.52-MM DIA)(1.9-M)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(5.2-M)  
  8T-8737 [73] PLUG-SEAL  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)  
  9X-3402 [149] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [149] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  134-2540 [2] RECEPTACLE AS-CONNECTOR (3-PIN)  
  9X-3401 [27] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [27] PIN-CONNECTOR (14-GA TO 16-GA)  
  174-0503 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES WEDGES, PLUG AS & INTERFACE SEAL)
  230-4009 [4] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  264-7034 [1] SEAL-CONNECTOR  
  230-4010 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  230-4011 [22] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  230-4013 [9] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  231-2295 [2] PLUG AS-CONNECTOR (8-PIN)  
    (EACH INCLUDES)
  264-7033 [1] SEAL-CONNECTOR  
  231-2296 [2] PLUG AS-CONNECTOR (8-PIN)  
    (EACH INCLUDES)
  264-7033 [1] SEAL-CONNECTOR  
  231-2297 [2] RECEPTACLE AS-CONNECTOR (8-PIN)  
    (EACH INCLUDES)
  264-7033 [1] SEAL-CONNECTOR  
  231-2298 [2] PLUG AS  
    (EACH INCLUDES)
  264-7033 [1] SEAL-CONNECTOR  
  239-7356 [1] PLUG AS-CONNECTOR (12-PIN)  
  264-7034 [1] SEAL-CONNECTOR  
  243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4510 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  272-5000 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  329-3734 TAPE-ELECTRICAL  
5. 440-4784 [1] BRACKET AS  
  361-5420 [3] CLIP  
  [1] BRACKET  
6. 132-5789 [3] CLIP (LADDER)  
7. 233-2106 [2] COLLAR  
8. 294-4826 M [4] BOLT-SOCKET HEAD (M8X1.25X80-MM)  
9. 352-3964 [1] CLIP (LADDER)  
10. 352-3971 [1] CLIP  
11. 352-3968 [1] CLIP (LADDER)  
12. 4P-7581 [2] CLIP (LADDER)  
13. 4P-8134 [1] CLIP (LADDER)  
14. 7X-0457 M [4] BOLT (M8X1.25X130-MM)  
15. 7X-2536 M [8] BOLT (M8X1.25X14-MM)  
16. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4177 M [2] BOLT (M8X1.25X90-MM)  
18. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
19. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
20. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 8T-4224 [18] WASHER-HARD (8.8X16X2-MM THK)  
23. 8T-4970 M [2] BOLT (M6X1X14-MM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#M00656340461
 

460-0861: WIRING GP-VALVE

460-0861 WIRING GP-VALVE
S/N XAJ1-UP
PART OF 459-1170 VALVE AR-MAIN CONTROL
i06140593 M0065634
4600861 WIRING GP-VALVE Parts scheme
  For full view, you need register

Parts for your 352F XE VG EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [12] STRAP-CABLE  
2. 352-2616 [1] HARNESS AS-VALVE  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  9X-3402 [14] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-3401 [12] PIN-CONNECTOR (16-GA TO 18-GA)  
  230-4010 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  230-4011 [4] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  230-4013 [2] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
3. 460-0860 Y [1] WIRING GP-VALVE  
4. 132-5789 [4] CLIP (LADDER)  
5. 4P-7582 [1] CLIP (LADDER)  
6. 4P-8134 [1] CLIP (LADDER)  
7. 7X-2536 M [4] BOLT (M8X1.25X14-MM)  
8. 7X-2552 M [1] BOLT (M16X2X30-MM)  
9. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
10. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00656340462
 

489-0499: WIRING GP-VALVE

489-0499 WIRING GP-VALVE
S/N XAJ1-UP
PART OF 489-0508 CONTROL AR-AUXILIARY
i06802744 M0065634
4890499 WIRING GP-VALVE Parts scheme
  For full view, you need register

Parts for your 352F XE VG EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [12] STRAP-CABLE  
2. 352-2616 Y [1] HARNESS AS-VALVE  
3. 132-5789 [4] CLIP (LADDER)  
4. 4P-7582 [1] CLIP (LADDER)  
5. 4P-8134 [1] CLIP (LADDER)  
6. 7X-2536 M [4] BOLT (M8X1.25X14-MM)  
7. 7X-2552 M [1] BOLT (M16X2X30-MM)  
8. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
9. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00656340463
 

460-4988: DRIVE GP-FINAL

460-4988 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N XAJ1-UP
PART OF 353-0526 FINAL DRIVE & MOUNTING GP
i06578138 M0065634
4604988 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 352F XE VG EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-6399 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 480-7428 Y [1] DRIVE GP-FINAL  
  Y   SEPARATE ILLUSTRATION
 

#M00656340464
 

480-7428: DRIVE GP-FINAL

480-7428 DRIVE GP-FINAL -WITH MOTOR
S/N XAJ1-UP
PART OF 460-4988 DRIVE GP-FINAL
i06710118 M0065634
4807428 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 352F XE VG EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 417-7195 Y [1] MOTOR & MTG GP-TRAVEL  
2. 480-7429 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#M00656340465
 

480-7429: DRIVE GP-FINAL

480-7429 DRIVE GP-FINAL -WITHOUT MOTOR
S/N XAJ1-UP
PART OF 480-7428 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@504-1674@@@@@, @@@@@518-1212@@@@@
i06710183 M0065634
4807429 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 352F XE VG EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-0525 [2] CUP-BEARING  
2. 7Y-0667 [2] RING-RETAINING  
3. 7Y-0808 B [1] SHIM (1.6-MM THK)  
4. 7Y-1469 [1] COUPLING  
5. 7Y-1472 B [1] SHIM (0.15-MM THK)  
6. 7Y-1473 B [1] SHIM (0.3-MM THK)  
7. 7Y-1474 B [1] SHIM (0.4-MM THK)  
8. 7Y-1475 B [1] SHIM (0.5-MM THK)  
9. 7Y-1476 B [1] SHIM (0.6-MM THK)  
10. 7Y-1477 B [1] SHIM (0.7-MM THK)  
11. 7Y-1478 B [1] SHIM (0.8-MM THK)  
12. 7Y-1479 B [1] SHIM (1-MM THK)  
13. 7Y-1480 B [1] SHIM (1.6-MM THK)  
14. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
15. 114-1541 [6] PIN-DOWEL  
16. 136-2898 [14] WASHER (58.3X89X1-MM THK)  
17. 191-2690 [6] WASHER (42.3X70X1-MM THK)  
18. 199-4719 [1] GEAR-COUPLING  
19. 227-6048 [12] WASHER (26X40X4-MM THK)  
20. 255-2272 [1] SEAL GP-DUO-CONE  
  205-9114 [2] RING-TORIC  
21. 296-6185 [4] SHAFT (PLANET)  
22. 296-6195 [3] SHAFT (PLANET)  
23. 296-6248 [3] BEARING AS-ROLLER  
24. 333-2927 [1] GEAR-SUN (18-TEETH)  
25. 333-2928 [1] GEAR-SUN (21-TEETH)  
26. 333-2929 [1] GEAR-SUN (21-TEETH)  
27. 333-2930 [3] GEAR-PLANETARY (21-TEETH)  
28. 333-2931 [3] GEAR-PLANETARY (20-TEETH)  
29. 333-2932 [4] GEAR-PLANETARY (20-TEETH)  
30. 333-2936 [1] CARRIER AS  
31. 333-2938 [1] CARRIER-PLANETARY  
32. 333-2939 [1] CARRIER-PLANETARY  
33. 333-2942 [1] SPACER (183X209.6X8.5-MM THK)  
34. 480-7403 [1] COVER  
35. 333-2960 [1] GEAR-RING  
36. 333-3033 [1] HOUSING-MOTOR  
37. 333-3035 [1] PLATE  
38. 346-5216 [11] BEARING-NEEDLE  
39. 346-5556 [2] CONE-BEARING  
40. 353-0605 [1] HOUSING-GEAR  
41. 451-2176 [28] WASHER-HARD (22X35X3.5-MM THK)  
42. 451-2182 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
43. 143-0811 M [20] BOLT (12X1.75X35-MM)  
44. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
45. 096-8058 [3] RING-RETAINING  
46. 238-6588 [7] PIN-SPRING  
47. 3E-2338 [2] PLUG-PIPE  
48. 4S-5924 [1] SEAL-O-RING  
49. 6V-8133 M [12] BOLT (M24X3X80-MM)  
50. 6V-8200 M [20] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
51. 7M-8485 [2] SEAL-O-RING  
52. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
53. 7Y-5217 M [28] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
54. 8C-5240 [1] SEAL-O-RING  
55. 5P-8245 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#M00656340466
 

504-1673: DRIVE GP-FINAL

504-1673 DRIVE GP-FINAL -WITH MOTOR, LH
S/N XAJ1-UP
PART OF 518-1209 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@511-6019@@@@@
i06941315 M0065634
5041673 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 352F XE VG EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 417-7195 Y [1] MOTOR & MTG GP-TRAVEL  
2. 504-1674 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR, LH)  
3. 095-1269 M [1] SETSCREW-SOCKET (M10X1.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00656340467
 

504-1674: DRIVE GP-FINAL

504-1674 DRIVE GP-FINAL -WITHOUT MOTOR, LH
S/N XAJ1-UP
PART OF 504-1673, 511-6019 DRIVE GP-FINAL
FIELD REPLACEMENT FOR @@@@@513-0980@@@@@, @@@@@480-7429@@@@@
i06941289 M0065634
5041674 DRIVE GP-FINAL Parts scheme 5041674 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 352F XE VG EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-0808 B [1] SHIM (1.6-MM THK)  
2. 7Y-1469 [1] COUPLING  
3. 7Y-1472 B [1] SHIM (0.15-MM THK)  
  7Y-1473 B [1] SHIM (0.3-MM THK)  
  7Y-1474 B [1] SHIM (0.4-MM THK)  
  7Y-1475 B [1] SHIM (0.5-MM THK)  
  7Y-1476 B [1] SHIM (0.6-MM THK)  
  7Y-1477 B [1] SHIM (0.7-MM THK)  
  7Y-1478 B [1] SHIM (0.8-MM THK)  
  7Y-1479 B [1] SHIM (1-MM THK)  
  7Y-1480 B [1] SHIM (1.6-MM THK)  
12. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
13. 114-1541 [6] PIN-DOWEL  
14. 136-2898 [14] WASHER (58.3X89X1-MM THK)  
15. 191-2690 [6] WASHER (42.3X70X1-MM THK)  
16. 199-4719 [1] GEAR-COUPLING  
17. 227-6048 [12] WASHER (26X40X4-MM THK)  
18. 255-2272 [1] SEAL GP-DUO-CONE  
  205-9114 [2] RING-TORIC  
19. 296-6185 [4] SHAFT  
20. 296-6195 [3] SHAFT  
21. 333-2927 [1] GEAR-SUN (18-TEETH)  
22. 333-2928 [1] GEAR-SUN (21-TEETH)  
23. 333-2929 [1] GEAR-SUN (21-TEETH)  
24. 333-2930 [3] GEAR-PLANETARY (21-TEETH)  
25. 333-2931 [3] GEAR-PLANETARY (20-TEETH)  
26. 333-2932 [4] GEAR-PLANETARY (20-TEETH)  
27. 333-2936 [1] CARRIER AS  
28. 333-2938 [1] CARRIER-PLANETARY  
29. 333-2939 [1] CARRIER-PLANETARY  
30. 333-2942 [1] SPACER (183X209.6X8.5-MM THK)  
31. 333-2960 [1] GEAR-RING  
32. 333-3035 [1] PLATE  
33. 346-5216 [11] BEARING-NEEDLE  
34. 346-5556 [2] CONE-BEARING  
35. 353-0605 [1] HOUSING-GEAR  
36. 451-2176 [28] WASHER-HARD (22X35X3.5-MM THK)  
37. 451-2182 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 452-3521 [1] HOUSING-MOTOR  
39. 480-7403 [1] COVER  
40. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
41. 096-8058 [3] RING-RETAINING  
42. 143-0811 M [20] BOLT (12X1.75X35-MM)  
43. 238-6588 [7] PIN-SPRING  
44. 296-6248 [3] BEARING AS-ROLLER  
45. 2R-0525 [2] CUP-BEARING  
46. 3E-2338 [2] PLUG-PIPE  
47. 4S-5924 [1] SEAL-O-RING  
48. 5P-8245 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
49. 6V-8133 M [12] BOLT (M24X3X80-MM)  
50. 6V-8200 M [20] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
51. 7M-8485 [2] SEAL-O-RING  
52. 7Y-0667 [2] RING-RETAINING  
53. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
54. 7Y-5217 M [28] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
55. 8C-5240 [1] SEAL-O-RING  
56. 503-0954 [1] GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#M00656340468
 

511-6019: DRIVE GP-FINAL

511-6019 DRIVE GP-FINAL -WITH MOTOR, LH
S/N XAJ1-UP
FIELD REPLACEMENT FOR @@@@@504-1673@@@@@
i07531653 M0065634
5116019 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 352F XE VG EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 504-1674 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR, LH)  
2. 519-2480 Y [1] MOTOR & MTG GP-TRAVEL  
3. 095-1269 M [1] SETSCREW-SOCKET (M10X1.5-THD)  
4. 8T-4241 [1] RING-RETAINING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00656340469
 

513-0978: DRIVE GP-FINAL

513-0978 DRIVE GP-FINAL -WITH MOTOR, SPROCKET, LH
S/N XAJ1-UP
PART OF 353-0526 FINAL DRIVE & MOUNTING GP
i06938763 M0065634
5130978 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 352F XE VG EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-6399 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. Y [1] DRIVE GP-FINAL (WITH MOTOR, LH)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Electrical Connectors
C13, C15, and C18 Tier 4 Final Engines
ARD Ignition - Test
C13, C15, and C18 Tier 4 Final Engines
Electrical Connectors - Inspect
C13, C15, and C18 Tier 4 Final Engines
Disassembly and Assembly
Nozzle Heater Harness - Remove and Install
C13 Engine for Caterpillar Built Machines
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C13 Engine for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 352F XE VG :

WIRING GP-UNIT INJECTOR
345-6734 WIRING GP-UNIT INJECTOR
WIRING GP-SENSOR
349-6154 WIRING GP-SENSOR
WIRING GP-PLATFORM
377-8214 WIRING GP-PLATFORM
WIRING GP-PANEL
377-8258 WIRING GP-PANEL
WIRING GP-MEDIUM PRESSURE
481-5331 WIRING GP-MEDIUM PRESSURE
WIRING GP-FRONT
527-0835 WIRING GP-FRONT
WIRING GP-FRONT
527-0834 WIRING GP-FRONT
WIRING GP-FRONT
493-3258 WIRING GP-FRONT
WIRING GP-VALVE
460-0861 WIRING GP-VALVE
WIRING GP-VALVE
489-0499 WIRING GP-VALVE
DRIVE GP-FINAL
460-4988 DRIVE GP-FINAL
DRIVE GP-FINAL
480-7428 DRIVE GP-FINAL
DRIVE GP-FINAL
480-7429 DRIVE GP-FINAL
DRIVE GP-FINAL
504-1673 DRIVE GP-FINAL
DRIVE GP-FINAL
504-1674 DRIVE GP-FINAL
DRIVE GP-FINAL
511-6019 DRIVE GP-FINAL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.