ELECTRICAL AND STARTING SYSTEM
SENSOR GPALTERNATOR GP-CHARGING
BOX GP
IGNITION GP
CONNECTION GP
CONTROL GP-ELECTRONIC
CIRCUIT BREAKER GP
HARNESS GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
#M00659840090
505-1228: ADAPTER GP-SENSOR
For full view, you need register
Parts for your DG150 GENERATOR SET:
CATERPILLAR SIS#M00659840091
505-1228: ADAPTER GP-SENSOR
For full view, you need register
Parts for your DG150 GENERATOR SET:
CATERPILLAR SIS#M00659840092
505-0702: ALTERNATOR AS-CHARGING
505-0702 ALTERNATOR AS-CHARGING
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Parts for your DG150 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00659840093
485-7748: BLOCK GP-JUNCTION
For full view, you need register
Parts for your DG150 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 485-7742 | [1] | RAIL | |
| 2. | 374-5718 | [19] | BLOCK-TERMINAL (800-VOLT, 24-AMPERE) | |
| 3. | 374-5719 | [2] | COVER-END | |
| 4. | 374-5721 | [2] | CLIP-TERMINAL | |
| 5. | 374-5723 | [2] | BAR-FIXED BRIDGE | |
| 6. | 374-5732 | [1] | BLOCK-TERMINAL | |
| 7. | 443-1279 | [7] | HOLDER-FUSE (30-AMPERE) | |
| 8. | 485-7734 | [1] | HOLDER-FUSE (50-AMPERE) | |
| 9. | 260-6671 M | [2] | BOLT (M6X1X12-MM) | |
| 10. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 11. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#M00659840094
505-0722: COIL GP-IGNITION
505-0722 COIL GP-IGNITION
FIELD INSTALLATION
FIELD INSTALLATION
For full view, you need register
Parts for your DG150 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00659840095
369-7563: CONNECTION GP-ELECTRICAL
369-7563 CONNECTION GP-ELECTRICAL
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your DG150 GENERATOR SET:
CATERPILLAR SIS#M00659840096
500-3559: CONTROL GP-ELECTRONIC
500-3559 CONTROL GP-ELECTRONIC
PART OF 378-7479 PANEL GP-ELECTRONIC
AN ATTACHMENT
PART OF 378-7479 PANEL GP-ELECTRONIC
AN ATTACHMENT
For full view, you need register
Parts for your DG150 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 486-1193 | [1] | CONTROL GP-GENERATOR SET | |
| 2. | 474-5636 | [1] | CONTROL GP-GENERATOR SET | |
| 474-5637 | [1] | CONTROL GP-ELECTRONIC | ||
| 359-0948 | [1] | FILM-INFORMATION (EMCP 4.1/4.2) | ||
| 3. | 1H-3338 | [6] | LOCKWASHER (EXTERNAL TOOTH) | |
| 5C-2890 M | [6] | NUT (M6X1-THD) | ||
| 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | ||
| 4. | 1H-4393 | [1] | LOCKWASHER | |
| 5. | 233-7742 M | [1] | SCREW (M4X0.7X7-MM) | |
| 6. | 8C-9660 | [1] | WASHER (4.6X7.9X0.8-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#M00659840097
501-1317: COVER GP-CIRCUIT BREAKER
501-1317 COVER GP-CIRCUIT BREAKER
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your DG150 GENERATOR SET:
CATERPILLAR SIS#M00659840098
485-7747: HARNESS AS-ENGINE
For full view, you need register
Parts for your DG150 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1S-9593 | [15] | STRAP-CABLE | ||
| 5P-6001 D | TUBE-HEAT SHRINK (4.75-MM DIA)(0.3-M) | |||
| 108-9656 | [25] | STRAP-CABLE | ||
| 9W-0844 | [9] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(40-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 2L-8052 | [2] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [2] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 136-4877 | [6] | SPLICE-WIRE (14-GA TO 16-GA) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 246-2009 | [2] | TERMINAL | ||
| 246-2010 | [2] | INSULATOR | ||
| 262-4800 | [1] | CLAMP AS | ||
| 346-3484 | [1] | PLUG AS-CONNECTOR | ||
| 367-6697 | [1] | CONNECTOR AS | ||
| 493-2772 E | SLEEVE (472-CM) | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#M00659840099
485-7746: HARNESS AS-WIRING
For full view, you need register
Parts for your DG150 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1S-9593 | [15] | STRAP-CABLE | ||
| 5P-6001 D | TUBE-HEAT SHRINK (4.75-MM DIA)(0.8-M) | |||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [40] | PLUG-SEAL | ||
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(86-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 126-1768 | [35] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| -OR- | ||||
| 9X-3402 | [35] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 136-4877 | [1] | SPLICE-WIRE (14-GA TO 16-GA) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 203-9007 | [1] | NUT (1-1/2-18-THD) | ||
| 239-8548 | [3] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 240-1407 | [4] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 246-2009 | [17] | TERMINAL | ||
| 246-2010 | [17] | INSULATOR | ||
| 261-7653 | [1] | SOCKET AS | ||
| 261-7902 | [20] | PLUG-CONNECTOR | ||
| 265-4123 | [1] | RECEPTACLE AS-CONNECTOR (9-PIN) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
