SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSGASKET & SEAL KITS
LINES GP-DIAGNOSTIC
CHARTS & FILMS
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS
#M00661061400
472-8730: FILM GP
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 442-6378 | [2] | FILM-WARNING (FLYING DEBRIS, READ OMM) |
#M00661061401
499-2518: FILM GP
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 442-6377 | [2] | FILM-WARNING (FLYING DEBRIS, READ OMM) |
#M00661061402
506-3507: FILM GP
506-3507 FILM GP
S/N MK21-UP
CANADIAN MARKET
PART OF 509-6644 CONVERSION AR-CERTIFICATION, 509-6645, 561-4441, 561-4443 CONVERSION AR-MACHINE
S/N MK21-UP
CANADIAN MARKET
PART OF 509-6644 CONVERSION AR-CERTIFICATION, 509-6645, 561-4441, 561-4443 CONVERSION AR-MACHINE
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 504-1365 | [1] | FILM-IDENTIFICATION (CANADIAN STANDARDS ASSOCIATION) | ||
| (ON LH SIDE OF NEEF 45-MM BELOW PIN PLATE) | ||||
#M00661061403
478-7468: FILM-INFORMATION
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00661061404
514-8065: KIT-GASKET
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8C-3445 | [1] | CAP-DUST | ||
| 217-3674 | [14] | FASTENER AS | ||
| 209-7309 | [3] | PLUG | ||
| 217-3673 | [1] | SEAL-ISOLATION | ||
| 5P-8211 | [1] | SEAL-O-RING | ||
| 6V-3251 | [1] | SEAL-O-RING | ||
| 061-9455 | [2] | SEAL-O-RING | ||
| 061-9458 | [2] | SEAL-O-RING | ||
| 131-3718 | [1] | SEAL-O-RING | ||
| 214-7566 | [6] | SEAL-O-RING | ||
| 214-7568 | [2] | SEAL-O-RING | ||
| 228-4947 | [1] | SEAL-O-RING | ||
| 228-7090 | [1] | SEAL-O-RING | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 238-5084 | [2] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#M00661061405
514-8077: KIT-GASKET
514-8077 KIT-GASKET
S/N MK21-UP
CONTAINS THE GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLER(S). OIL FILTER BASE AND ATTACHING LINES
FOR USE WITH @@@@@373-3856@@@@@
S/N MK21-UP
CONTAINS THE GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLER(S). OIL FILTER BASE AND ATTACHING LINES
FOR USE WITH @@@@@373-3856@@@@@
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 336-2216 | [1] | GASKET-FILTER BASE | ||
| 2N-5243 | [2] | SEAL-O-RING | ||
| 3E-6788 | [1] | SEAL-O-RING | ||
| 5P-8068 | [2] | SEAL-O-RING | ||
| 6V-5064 | [1] | SEAL-O-RING | ||
| 6V-5134 | [3] | SEAL-O-RING | ||
| 8J-4351 | [1] | SEAL-O-RING | ||
| 061-9455 | [2] | SEAL-O-RING | ||
| 113-5304 | [2] | SEAL-O-RING | ||
| 213-9396 | [1] | SEAL-O-RING | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 214-7568 | [5] | SEAL-O-RING | ||
| 228-7089 | [1] | SEAL-O-RING | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 238-5084 | [3] | SEAL-O-RING | ||
| 346-4897 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#M00661061406
514-8087: KIT-GASKET
514-8087 KIT-GASKET
S/N MK21-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS, DOES NOT INCLUDE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. CONTAINS TURBO MOUNTING HARDWARE
S/N MK21-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS, DOES NOT INCLUDE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. CONTAINS TURBO MOUNTING HARDWARE
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9Y-1758 | [1] | GASKET | ||
| 197-8418 | [1] | GASKET | ||
| 197-8419 | [1] | GASKET (TURBOCHARGER) | ||
| 221-9392 | [1] | GASKET | ||
| 283-2238 | [6] | GASKET | ||
| 289-3107 | [1] | GASKET | ||
| 349-9659 | [1] | GASKET | ||
| 230-3518 | [1] | GASKET-MANIFOLD | ||
| 212-7728 | [10] | ISOLATOR AS | ||
| 375-2467 M | [4] | LOCKNUT-FLANGE (M10X1.5-THD) | ||
| 224-6361 | [1] | SEAL | ||
| 272-0389 | [1] | SEAL | ||
| 321-5639 | [1] | SEAL | ||
| 341-1429 | [1] | SEAL | ||
| 3S-9643 | [2] | SEAL-LIP TYPE | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 214-7567 | [1] | SEAL-O-RING | ||
| 5P-5598 | [1] | SEAL-O-RING | ||
| 5P-5756 | [1] | SEAL-O-RING | ||
| 5P-5757 | [1] | SEAL-O-RING | ||
| 6V-3251 | [1] | SEAL-O-RING | ||
| 6V-5063 | [3] | SEAL-O-RING | ||
| 6V-6353 | [1] | SEAL-O-RING | ||
| 6V-6609 | [1] | SEAL-O-RING | ||
| 6V-9769 | [2] | SEAL-O-RING | ||
| 7L-6580 | [3] | SEAL-O-RING | ||
| 8T-5917 | [1] | SEAL-O-RING | ||
| 9X-7380 | [1] | SEAL-O-RING | ||
| 033-6033 | [1] | SEAL-O-RING | ||
| 109-2332 | [2] | SEAL-O-RING | ||
| 214-7568 | [9] | SEAL-O-RING | ||
| 225-6948 | [1] | SEAL-O-RING | ||
| 228-7089 | [6] | SEAL-O-RING | ||
| 238-5080 | [2] | SEAL-O-RING | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 238-5082 | [1] | SEAL-O-RING | ||
| 272-2583 | [1] | SEAL-O-RING | ||
| 437-4425 | [1] | SEAL-O-RING | ||
| 124-1858 | [1] | SEAL-O-RING | ||
| 229-5711 | [1] | SEAL-VALVE COVER | ||
| 178-7879 | [1] | SEAL-WASHER | ||
| 376-3408 M | [4] | STUD-TAPERLOCK (M10X1.5X55-MM) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
| M | METRIC PART | |||
#M00661061407
364-7865: LINES GP-DIAGNOSTIC
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 197-4566 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 2. | 204-1611 | [5] | STRAP (DUAL) | |
| 3. | 204-8000 | [2] | MOUNTING-CABLE TIE | |
| 4. | 389-4302 | [1] | HOSE AS | |
| 5. | 433-6019 | [1] | HOSE AS | |
| 6. | 433-6020 | [1] | HOSE AS | |
| 7. | 433-6025 | [1] | BRACKET AS | |
| 9C-4935 | [1] | PLATE | ||
| 8. | 148-8368 | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8627 | [1] | ELBOW | ||
| 9. | 148-8413 | [1] | REDUCER AS | |
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8934 | [1] | ADAPTER | ||
| 10. | 148-8439 | [1] | TEE AS | |
| 6V-8774 | [1] | TEE | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [2] | SEAL-O-RING | ||
| 11. | 150-3033 | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 8T-0164 | [1] | ELBOW | ||
| 12. | 164-5567 | [3] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| (EACH INCLUDES) | ||||
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 13. | 169-5863 | [3] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 7X-7945 | [1] | ADAPTER (9/16-18-THD) | ||
| 14. | 204-2281 | [2] | STRAP-CABLE | |
| 15. | 2P-1279 | [3] | LOCKNUT (9/16-18-THD) | |
| 16. | 6V-0852 | [3] | CAP-DUST | |
| 17. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 19. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 20. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| M | METRIC PART | |||
#M00661061408
424-3149: LINES GP-DIAGNOSTIC
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 148-8368 | [1] | ELBOW AS | |
| 6V-8627 | [1] | ELBOW | ||
| 3J-1907 | [2] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 2. | 148-8413 | [1] | REDUCER AS | |
| 6V-8934 | [1] | ADAPTER | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 3. | 148-8439 | [1] | TEE AS | |
| 6V-8774 | [1] | TEE | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [2] | SEAL-O-RING | ||
| 4. | 150-3033 | [1] | ELBOW AS | |
| 8T-0164 | [1] | ELBOW | ||
| [1] | SEAL | |||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 5. | 169-5863 | [3] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 7X-7945 | [1] | ADAPTER (9/16-18-THD) | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6. | 197-4566 | [1] | BRACKET AS | |
| 7. | 204-1611 | [5] | STRAP (DUAL) | |
| 8. | 370-9488 | [2] | STRAP-CABLE | |
| 9. | 424-3016 | [1] | HOSE AS | |
| 10. | 424-3017 | [1] | HOSE AS | |
| 11. | 424-3018 | [1] | HOSE AS | |
| 12. | [1] | BRACKET AS | ||
| 13. | 164-5567 | [3] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| (EACH INCLUDES) | ||||
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 14. | 204-8000 | [2] | MOUNTING-CABLE TIE | |
| 15. | 2P-1279 | [3] | LOCKNUT (9/16-18-THD) | |
| 16. | 6V-0852 | [3] | CAP-DUST | |
| 17. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| M | METRIC PART | |||
#M00661061409
373-3907: PLATE & FILM GP
373-3907 PLATE & FILM GP -U.S.
S/N MK21-UP
PART OF 509-6644 CONVERSION AR-CERTIFICATION, 482-6073, 561-4441 CONVERSION AR-MACHINE
S/N MK21-UP
PART OF 509-6644 CONVERSION AR-CERTIFICATION, 482-6073, 561-4441 CONVERSION AR-MACHINE
For full view, you need register
Parts for your 980M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 349-8603 | [1] | FILM-INSTRUCTION (FUEL, READ OMM) | ||
| (ON RADIATOR SIDE PLATE NEAR FUEL FILL) | ||||
| 226-1275 | [1] | FILM-WARNING (CRUSH HAZARD, READ OMM, U.S.) | ||
| (ON LEFT OUTER FACE OF NON ENGINE FRAME, BOTTOM EDGE 420-MM ABOVE CENTER HORIZONTAL CENTER LINE OF LIFT CYLINDER PIN & FRONT EDGE 285-MM FROM CENTER LINE OF LIFT CYLINDER PIN) | ||||
| 226-1242 | [2] | FILM-WARNING (CRUSH HAZARD, STAY BACK, U.S.) | ||
| (ON BOTH OUTER SIDE FACES OF NON ENGINE FRAME, BOTTOM EDGE 505-MM ABOVE CENTER HORIZONTAL CENTER LINE OF LIFT CYLINDER PIN & FRONT EDGE 285-MM FROM CENTER LINE OF LIFT CYLINDER PIN) | ||||
| 224-7830 | [1] | FILM-WARNING (HIGH PRESSURE, READ OMM, U.S.) | ||
| (ON RIGHT OUTER FACE OF NON ENGINE FRAME, TOP EDGE 5-MM BELOW BOTTOM EDGE OF FILM-WARNING CRUSH & LEFT EDGE ALIGNED WITH LEFT EDGE OF FILM-WARNING CRUSH) | ||||
| 228-9105 | [2] | FILM-WARNING (HOT SURFACE-VERTICAL) | ||
| 1-(ON FLAT SURFACE ON FRONT OF AIR CLEANER COVER AS FAR REARWARD AS POSSIBLE) | ||||
| 1-(ON LEFT SIDE RADIATOR SUPPORT 10-MM +/- 5-MM FROM BOTTOM OF SUPPORT) | ||||
| 225-0313 | [2] | FILM-WARNING (JUMP START, READ OMM, U.S.) | ||
| 1-(ON LH SIDE OF MACHINE ON OUTSIDE OF BATTERY BOX COVER) | ||||
| 1-(INSIDE DISCONNECT SWITCH COMPARTMENT ABOVE SWITCHES) | ||||
| 463-0969 | [2] | FILM-WARNING (ROTATING FAN) | ||
| (ON FRONT & BELOW OF RADIATOR ACCESS DOORS ON BOTH SIDES OF MACHINE) | ||||
| 444-5638 | [2] | FILM-WARNING (LEAK DETECTION, READ OMM) | ||
| (CENTERED ABOVE WINDOW CUTOUT ON BOTH OUTSIDE & INSIDE OF NEEF FRONT PLATE) | ||||
| 224-8945 | [1] | FILM-WARNING (DO NOT USE ETHER, U.S.) | ||
| (ON TOP HOOD PANEL 440-MM +/- 25-MM FROM FRONT EDGE, CENTERED WITH AIR CLEANER & OFFSET TO MACHINE SIDE BY 100-MM +/- 25-MM) | ||||
| 228-7315 | [2] | FILM-WARNING (HOT SURFACE, HANDS CLEAR) | ||
| 1-(ON LEFT SIDE HOOD PANEL 715-MM FROM REAR EDGE & 20-MM FROM BOTTOM EDGE) | ||||
| 1-(ON RIGHT SIDE HOOD PANEL 715-MM FROM REAR EDGE & 20-MM FROM BOTTOM EDGE) | ||||
