479-7793 WIRING GP-PLATFORM -OPERATOR S/N NHD10001-UP PART OF 500-8140 CONTROL & MONITOR GP-CAB 320F L

479-7793: WIRING GP-PLATFORM

479-7793 WIRING GP-PLATFORM -OPERATOR
S/N NHD10001-UP
PART OF 500-8140 CONTROL & MONITOR GP-CAB

Parts for your 320F L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[12]	STRAP-CABLE
3.	6S-4039	[1]	GROMMET
4.	7G-1060	[1]	STRAP AS-GROUND
5.	7K-1181	[5]	STRAP-CABLE
6.	111-4836	[9]	CLIP
7.	111-4837	[1]	CLIP
8.	116-0118	[3]	CLIP
9.	234-1122	[1]	COVER
10.	301-2981	[1]	SWITCH AS-TOGGLE (SECONDARY SHUTDOWN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
11.	319-1260	[2]	PANEL
12.	328-0077	[2]	CAP
13.	328-0119	[1]	SHEET
14.	479-7823	[1]	HARNESS AS-PLATFORM
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[13]	STRAP-CABLE
	8T-8737	[6]	PLUG-SEAL
	9W-0852	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM)
	9X-3402	[27]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[27]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8069	[2]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	9X-3401	[15]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[15]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	455-0704	[1]	SEAL-CONNECTOR
	281-8803	[7]	PLUG AS-CONNECTOR (3-PIN)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
			(EACH PLUG AS INCLUDES)
	455-0705	[1]	SEAL-CONNECTOR
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	455-0706	[1]	SEAL-CONNECTOR
	328-0076	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	342-2972	[1]	CAP-CONNECTOR (2-PIN)
	342-2973	[6]	CAP-CONNECTOR (3-PIN)
	342-2978	[1]	CAP-CONNECTOR (4-PIN)
15.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
16.	132-5789	[3]	CLIP (LADDER)
17.	204-1611	[1]	STRAP (DUAL)
18.	7X-2621 M	[3]	BOLT (M10X1.5X12-MM)
19.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
20.	8T-4121	[20]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
22.	8T-4137 M	[10]	BOLT (M10X1.5X20-MM)
23.	8T-4191 M	[3]	BOLT (M10X1.5X16-MM)
24.	204-1611 B	[1]	STRAP (DUAL)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

342-3071: WIRING GP-VALVE

WIRING GP-VALVE

342-3071 WIRING GP-VALVE
S/N NHD1-UP
PART OF 416-7765 ELECTRICAL AR

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7I-2673	[3]	STRAP-CABLE
3.	7K-1181	[16]	STRAP-CABLE
4.	342-3156	[1]	BRACKET AS-VALVE
5.	369-0155	[1]	HARNESS AS-VALVE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[18]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[8]	STRAP-CABLE
	8T-8737	[2]	PLUG-SEAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9X-3402	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-4013	[2]	PLUG AS-CONNECTOR (3-PIN)
			(EACH INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
	237-0227	[2]	PLUG AS-CONNECTOR (3-PIN)
			(EACH INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
6.	132-5789	[9]	CLIP (LADDER)
7.	4P-7581	[6]	CLIP (LADDER)
8.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
9.	8T-4121	[15]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4191 M	[15]	BOLT (M10X1.5X16-MM)
11.	8T-4199 M	[2]	BOLT (M8X1.25X12-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

479-7790: WIRING GP-VALVE

WIRING GP-VALVE

479-7790 WIRING GP-VALVE
S/N NHD10001-UP
PART OF 500-8138 ELECTRICAL AR

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7K-1181	[16]	STRAP-CABLE
3.	342-3156	[1]	BRACKET AS-VALVE
4.	479-7820	[1]	HARNESS AS-VALVE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[18]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[6]	STRAP-CABLE
	8T-8737	[2]	PLUG-SEAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
	9X-3402	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[12]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[6]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	455-0704	[1]	SEAL-CONNECTOR
	230-4013	[2]	PLUG AS-CONNECTOR (3-PIN)
	237-0227	[2]	PLUG AS-CONNECTOR (3-PIN)
			(EACH PLUG AS INCLUDES)
	455-0705	[1]	SEAL-CONNECTOR
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
5.	132-5789	[9]	CLIP (LADDER)
6.	4P-7581	[6]	CLIP (LADDER)
7.	7I-2673	[3]	STRAP-CABLE
8.	8T-4121	[15]	WASHER-HARD (11X21X2.5-MM THK)
9.	8T-4191 M	[15]	BOLT (M10X1.5X16-MM)
10.	8T-4199 M	[2]	BOLT (M8X1.25X12-MM)
11.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

441-3011: DRIVE GP-FINAL

DRIVE GP-FINAL

441-3011 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N NHD1-UP
PART OF 441-3007 FINAL DRIVE & MOUNTING GP

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	145-3042 Y	[1]	SPROCKET GP (NON-SEGMENTED)
2.	480-6767 CY	[1]	DRIVE GP-FINAL (WITH MOTOR)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

480-6767: DRIVE GP-FINAL

DRIVE GP-FINAL

480-6767 DRIVE GP-FINAL -WITH MOTOR
S/N NHD1-UP
PART OF 441-3011 DRIVE GP-FINAL

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	334-9986 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	480-6768 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

480-6768: DRIVE GP-FINAL

DRIVE GP-FINAL

480-6768 DRIVE GP-FINAL -WITHOUT MOTOR
S/N NHD1-UP
PART OF 480-6767 DRIVE GP-FINAL

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	094-0580	[1]	PLATE (10-MM THK)
2.	094-0611	[6]	WASHER (47.3X76X1-MM THK)
3.	096-1773 B	[1]	SHIM (0.15-MM THK)
	096-1774 B	[1]	SHIM (0.3-MM THK)
	096-1775 B	[1]	SHIM (0.4-MM THK)
	096-1776 B	[1]	SHIM (0.5-MM THK)
	096-1777 B	[1]	SHIM (0.6-MM THK)
	096-1778 B	[1]	SHIM (0.7-MM THK)
	096-1779 B	[1]	SHIM (0.8-MM THK)
	096-1780 B	[1]	SHIM (1-MM THK)
	096-1781 B	[1]	SHIM (1.6-MM THK)
12.	114-1539	[6]	PIN-DOWEL
13.	148-4715	[1]	GEAR-COUPLING (55-TEETH)
14.	174-4874	[1]	SEAL GP-DUO-CONE
15.	333-2989	[1]	GEAR-SUN (12-TEETH)
16.	333-2990	[1]	GEAR-SUN (18-TEETH)
17.	333-2991	[3]	GEAR-PLANETARY (38-TEETH)
18.	333-2992	[3]	GEAR-PLANETARY (35-TEETH)
19.	333-2993	[3]	SHAFT
20.	333-2994	[3]	SHAFT
21.	333-2995	[1]	CARRIER-PLANETARY
22.	333-2996	[1]	CARRIER-PLANETARY
23.	333-2998	[1]	HOUSING
24.	353-0612	[1]	HOUSING-MOTOR
25.	480-6771	[1]	COVER
26.	457-7977	[1]	GEAR-RING (90-TEETH)
27.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
28.	095-0891	[6]	PIN-SPRING
29.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
30.	143-0811 M	[16]	BOLT (12X1.75X35-MM)
31.	165-5785	[1]	SPACER (40X60.9X1-MM THK)
32.	227-6034 M	[14]	BOLT-FLANGE HEAD (M16X2X60-MM)
33.	296-6220	[2]	BALL BEARING
34.	296-6268	[6]	BEARING AS-ROLLER
35.	346-5215	[3]	BEARING AS
36.	3E-2338	[2]	PLUG-PIPE
37.	5P-8245	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
38.	6D-0692	[1]	SEAL-O-RING
39.	7M-8485	[2]	SEAL-O-RING
40.	7Y-1558	[1]	SPACER (90X119.6X7.5-MM THK)
41.	8T-0348 M	[28]	BOLT-SOCKET HEAD (M16X2X50-MM)
42.	9X-8268	[28]	WASHER (17.5X30X3.5-MM THK)
	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

507-6557: DRIVE GP-FINAL

DRIVE GP-FINAL

507-6557 DRIVE GP-FINAL -WITH MOTOR, SPROCKET, LH
S/N NHD1-UP
PART OF 441-3007 FINAL DRIVE & MOUNTING GP

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	145-3042 Y	[1]	SPROCKET GP (NON-SEGMENTED)
2.	507-6558 Y	[1]	DRIVE GP-FINAL (WITH MOTOR, LH)
	Y		SEPARATE ILLUSTRATION

507-6558: DRIVE GP-FINAL

DRIVE GP-FINAL

507-6558 DRIVE GP-FINAL -WITH MOTOR, LH
S/N NHD1-UP
PART OF 507-6557 DRIVE GP-FINAL

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	334-9986 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	507-6559 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR, LH)
3.	095-1269 M	[1]	SETSCREW-SOCKET (M10X1.5-THD)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

507-6559: DRIVE GP-FINAL

DRIVE GP-FINAL

507-6559 DRIVE GP-FINAL -WITHOUT MOTOR, LH
S/N NHD1-UP
PART OF 507-6558 DRIVE GP-FINAL

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	094-0580	[1]	PLATE (10-MM THK)
2.	094-0611	[6]	WASHER (47.3X76X1-MM THK)
3.	096-1773 B	[1]	SHIM (0.15-MM THK)
	096-1774 B	[1]	SHIM (0.3-MM THK)
	096-1775 B	[1]	SHIM (0.4-MM THK)
	096-1776 B	[1]	SHIM (0.5-MM THK)
	096-1777 B	[1]	SHIM (0.6-MM THK)
	096-1778 B	[1]	SHIM (0.7-MM THK)
	096-1779 B	[1]	SHIM (0.8-MM THK)
	096-1780 B	[1]	SHIM (1-MM THK)
	096-1781 B	[1]	SHIM (1.6-MM THK)
4.	3E-2338	[2]	PLUG-PIPE
5.	5P-8245	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
6.	6D-0692	[1]	SEAL-O-RING
7.	7M-8485	[2]	SEAL-O-RING
8.	7Y-1558	[1]	SPACER (90X119.6X7.5-MM THK)
9.	8T-0348 M	[28]	BOLT-SOCKET HEAD (M16X2X50-MM)
10.	9X-8268	[28]	WASHER (17.5X30X3.5-MM THK)
11.	346-5215	[3]	BEARING AS
12.	114-1539	[6]	PIN-DOWEL
13.	148-4715	[1]	GEAR-COUPLING (55-TEETH)
14.	174-4874	[1]	SEAL GP-DUO-CONE
15.	333-2989	[1]	GEAR-SUN (12-TEETH)
16.	333-2990	[1]	GEAR-SUN (18-TEETH)
17.	333-2991	[3]	GEAR-PLANETARY (38-TEETH)
18.	333-2992	[3]	GEAR-PLANETARY (35-TEETH)
19.	333-2993	[3]	SHAFT
20.	333-2994	[3]	SHAFT
21.	333-2995	[1]	CARRIER-PLANETARY
22.	333-2996	[1]	CARRIER-PLANETARY
23.	333-2998	[1]	HOUSING
24.	455-4087	[1]	HOUSING-MOTOR (LH)
25.	457-7977	[1]	GEAR-RING (90-TEETH)
26.	480-6771	[1]	COVER
27.	498-9005	[1]	GASKET
28.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
29.	095-0891	[6]	PIN-SPRING
30.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
31.	143-0811 M	[16]	BOLT (12X1.75X35-MM)
32.	165-5785	[1]	SPACER (40X60.9X1-MM THK)
33.	227-6034 M	[14]	BOLT-FLANGE HEAD (M16X2X60-MM)
34.	296-6220	[2]	BALL BEARING
35.	296-6268	[6]	BEARING AS-ROLLER
	B		USE AS REQUIRED
	M		METRIC PART

507-6560: DRIVE GP-FINAL

DRIVE GP-FINAL

507-6560 DRIVE GP-FINAL -WITH MOTOR, SPROCKET, RH
S/N NHD1-UP
PART OF 441-3007 FINAL DRIVE & MOUNTING GP

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	145-3042 Y	[1]	SPROCKET GP (NON-SEGMENTED)
2.	507-6561 Y	[1]	DRIVE GP-FINAL (WITH MOTOR, RH)
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
320F Excavator

Battery - Recycle
320F Excavator

SmartBoom Operation - If Equipped
320F Excavator

SmartBoom Control - If Equipped
320F Excavator

Power Receptacle - If Equipped
320F Excavator

Fuses - Replace
320F Excavator

Battery Disconnect Switch
320F Excavator

Fuses - Replace
320F Excavator

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation of Cold Climate Kit for C4.4 Engine {1317, 1408}
Installation of Cold Climate Kit for C4.4 Engine {1317, 1408}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation Procedure for the 453-8720 Cab Wiring Gp on Certain Hydraulic Excavators{1408}
Installation Procedure for the 453-8720 Cab Wiring Gp on Certain Hydraulic Excavators{1408}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}
Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}

Installation of the 500-9249 Auxiliary Control Ar (Tool Control) on Certain Hydraulic Excavators {1408, 5057, 5059, 7301, 7405, 7557}
Installation of the 500-9249 Auxiliary Control Ar (Tool Control) on Certain Hydraulic Excavators {1408, 5057, 5059, 7301, 7405, 7557}

Rework Procedure to Install Fine Grading on Certain Excavators {1408, 5480, 7610, 7620}
Rework Procedure to Install Fine Grading on Certain Excavators {1408, 5480, 7610, 7620}

Installation Procedure for 507-6699 Control Gp on Certain Hydraulic Excavators {1408}
Installation Procedure for 507-6699 Control Gp on Certain Hydraulic Excavators {1408}

Installation Procedure for 480-4375 Cab Wiring Gp {1408, 7301}
Installation Procedure for 480-4375 Cab Wiring Gp {1408, 7301}

Installation Procedure for 480-4378 Chassis Wiring Gp "Quick Coupler" for Certain Hydraulic Excavators {1408}
Installation Procedure for 480-4378 Chassis Wiring Gp "Quick Coupler" for Certain Hydraulic Excavators {1408}

Installation of the 480-4382 Medium Pressure Wiring on Certain Hydraulic Excavators {1408}
Installation of the 480-4382 Medium Pressure Wiring on Certain Hydraulic Excavators {1408}

Installation Procedure for the 500-8172 Chassis Wiring Gp On Certain Hydraulic Excavators {1408}
Installation Procedure for the 500-8172 Chassis Wiring Gp On Certain Hydraulic Excavators {1408}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB HARNESS ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CAB HARNESS ON CERTAIN E AND F SERIES EXCAVATORS

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS

Specifications

Wiring (Cab)
320F, 323F LN Excavator Machine Systems Specifications

Wiring (Front)
320F, 323F LN Excavator Machine Systems Specifications

Wiring (Chassis)
320F, 323F LN Excavator Machine Systems Specifications

Wiring (Battery)
320F, 323F LN Excavator Machine Systems Specifications

Wiring (Chassis)
320F, 323F LN Excavator Machine Systems Specifications

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines

Switches
320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F and 330F Excavators Tool Control System

Sensors
320E, 320F, 323E, 323F, 324E, 326F, 329E, 329F and 330F Excavators Tool Control System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS

Testing and Adjusting

Electric Starting System - Test
C4.4 Engines for Caterpillar Built Machines

Connector Contact Description
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Overload Warning - Set - If Equipped
320F and 323F N Excavator Machine System

Troubleshooting

Electrical Connector - Inspect
320F Excavator

Connector Locations
320F Excavator

Wiring Harness (Open Circuit) - Test
320F Excavator

Wiring Harness (Short Circuit) - Test
320F Excavator

Fuel Transfer Pump - Test
C4.4 Engines

Idle Validation - Test
C4.4 Engines

Electrical Connectors
C4.4 Engines

Relay - Test - Start Relay
C4.4 Engines

Electrical Connectors - Inspect
C4.4 Engines

Relay - Test - Aftertreatment Power Relay
C4.4 Engines

System Schematic
320F Excavator

Connector Contact Description
320F Excavator

System Schematic
320F Excavator

Connector Contact Description
320F Excavator

Disassembly and Assembly

Battery - Remove and Install
320F Excavator Engine Supplement

Service Magazine

Rework Procedure is Available to Replace a Cab Harness Connector to Match the Harness Connector of a Field Installed Product Link Kit on Certain E Series and F Series Excavators {1408, 7301}
2014/11/17

A New Special Instruction is Available for Troubleshooting the Upper Window Wiper Relay Circuit on Certain 311D-349D, E Series, and F Series Excavators {1408, 7305}
2015/08/07

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

New Pressure Sensor Gp Is Now Available for Certain Cat® Products {1000, 1408, 1439, 1718, 1906, 1924}
New Pressure Sensor Gp Is Now Available for Certain Cat^® Products {1000, 1408, 1439, 1718, 1906, 1924}

A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}
A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}

A New Air Conditioning Relay Harness Assembly Is Available for Certain 320E, 323E, and 320F-390F Excavators {1408, 7320}
A New Air Conditioning Relay Harness Assembly Is Available for Certain 320E, 323E, and 320F-390F Excavators {1408, 7320}

New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}

479-7793 WIRING GP-PLATFORM -OPERATOR S/N NHD10001-UP PART OF 500-8140 CONTROL & MONITOR GP-CAB 320F L

ELECTRICAL AND STARTING SYSTEM

479-7793: WIRING GP-PLATFORM

Parts for your 320F L EXCAVATOR:

342-3071: WIRING GP-VALVE

Parts for your 320F L EXCAVATOR:

479-7790: WIRING GP-VALVE

Parts for your 320F L EXCAVATOR:

441-3011: DRIVE GP-FINAL

Parts for your 320F L EXCAVATOR:

480-6767: DRIVE GP-FINAL

Parts for your 320F L EXCAVATOR:

480-6768: DRIVE GP-FINAL

Parts for your 320F L EXCAVATOR:

507-6557: DRIVE GP-FINAL

Parts for your 320F L EXCAVATOR:

507-6558: DRIVE GP-FINAL

Parts for your 320F L EXCAVATOR:

507-6559: DRIVE GP-FINAL

Parts for your 320F L EXCAVATOR:

507-6560: DRIVE GP-FINAL

Parts for your 320F L EXCAVATOR:

Information:

Caterpillar Parts SIS Catalog 320F L :