AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

464-8726 DRIVE GP-SWING -WITH MOTOR S/N NHD1-UP PART OF 333-2912 DRIVE & MTG GP-SWING 320F L EXCAVATOR


HYDRAULIC SYSTEM
DRIVE GP
FILTER GP
FITTING GP
TANK GP
PUMP GP

EXCAVATOR 320F L EXCAVATOR NHD
 320F L Excavator NHD00001-UP (MACHINE) POWERED BY C4.4 Engine M0066281 320F L NHD   (2012)

HYDRAULIC SYSTEM

DRIVE GP
DRIVE & MTG GP-SWING
333-2912 DRIVE & MTG GP-SWING
DRIVE GP-SWING
378-9517 DRIVE GP-SWING
DRIVE GP-SWING
464-8726 DRIVE GP-SWING
 

#M00662810440
 

464-8726: DRIVE GP-SWING

464-8726 DRIVE GP-SWING -WITH MOTOR
S/N NHD1-UP
PART OF 333-2912 DRIVE & MTG GP-SWING
i06584343 M0066281
4648726 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
2. 114-1399 [1] PIPE-GAUGE  
3. 227-6221 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
4. 378-9517 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
5. 467-1393 Y [1] MOTOR & MTG GP-SWING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#M00662810441
 

158-8987: FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N NHD1-UP
PART OF 417-2212 TANK & FILTER GP-HYDRAULIC
i01256862 M0066281
1588987 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
2. 215-4909 [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
2A. 095-1584 [1] SEAL-O-RING  
2B. 095-1590 [1] SEAL-O-RING  
2C. 095-1596 [1] SEAL-O-RING  
 

#M00662810442
 

188-4145: FILTER GP-OIL

188-4145 FILTER GP-OIL -HYDRAULIC RETURN
S/N NHD1-UP
PART OF 417-2212 TANK & FILTER GP-HYDRAULIC
i06194789 M0066281
1884145 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-2620 Y [1] HOUSING GP-FILTER  
2. 177-2617 Y [1] BLOCK GP-HYDRAULIC  
3. 177-2625 [1] PACKING  
4. 095-1682 [1] SEAL-O-RING  
5. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
6. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
7. 419-8528 CY [1] FILTER GP-OIL (HYDRAULIC RETURN)  
8. 173-3510 [1] COVER  
9. 123-2003 [1] SEAL-O-RING  
10. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
11. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 175-6178 [1] HOUSING  
13. 177-2623 [1] VALVE AS (BYPASS)  
14. 175-6174 [1] PIPE  
15. 8T-4970 M [2] BOLT (M6X1X14-MM)  
16. 175-6176 [1] SEAL-O-RING  
17. 6V-8932 M [1] SETSCREW-SOCKET (M6X1X10-MM)  
18. 095-1663 [2] SEAL-O-RING  
19. 187-7171 [2] BOLT (M8X1.25X14-MM)  
20. 175-6175 [1] PIPE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00662810443
 

289-8194: FILTER GP-OIL

289-8194 FILTER GP-OIL -HYDRAULIC, CASE DRAIN
S/N NHD1-UP
PART OF 417-2212 TANK & FILTER GP-HYDRAULIC
i02612632 M0066281
2898194 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-7521 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, CASE DRAIN)  
2. 289-8195 [1] HEAD AS-FILTER  
 

#M00662810444
 

419-8528: FILTER GP-OIL

419-8528 FILTER GP-OIL -HYDRAULIC RETURN
S/N NHD1-UP
PART OF 188-4145 FILTER GP-OIL
i06146966 M0066281
4198528 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 419-8531 [1] PLATE-SLIDE  
2. 173-3529 JM [6] BOLT (M6X1X15-MM)  
3. 3T-7528 J [6] SEAL-O-RING  
4. 173-3513 [1] BASE  
5. 3E-4297 J [2] SEAL-O-RING  
6. 137-3626 M [1] BOLT-SPECIAL (M6X1X23.25-MM)  
8. 179-9806 [1] FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY)(HYDRAULIC RETURN)  
9. 137-3623 J [4] SEAL-O-RING  
10. 6V-7658 J [2] SEAL-O-RING  
11. 177-2553 J [1] SEAL-O-RING  
12. 095-1681 J [1] SEAL-O-RING  
13. 173-3515 [1] RING-RETAINING  
14. 173-3516 [1] HANDLE  
15. 4J-7533 J [1] SEAL-O-RING  
16. 9S-4180 J [1] PLUG  
17. 137-3624 JM [8] SCREW (M3X0.5X5-MM)  
18. 137-3625 J [2] PAD  
19. 173-3517 [1] PLATE  
20. 137-3628 J [1] SHIM (0.1-MM THK)  
21. 419-8533 [1] FILM-INSTRUCTION (HYDRAULIC OIL RETURN FILTER)  
   
    AVAILABLE REPAIR KIT(S):
  201-9299 J [1] KIT-SERVICE (HYDRAULIC RETURN FILTER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#M00662810445
 

214-4513: FITTING GP-HYDRAULIC

214-4513 FITTING GP-HYDRAULIC
S/N NHD1-UP
PART OF 341-5366 LINES GP-HYDRAULIC
i01867488 M0066281
2144513 FITTING GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 214-4506 [1] TEE AS  
2. 3D-2824 [1] SEAL-O-RING  
3. 6V-8398 [1] SEAL-O-RING  
4. 6V-9746 [1] SEAL-O-RING  
 

#M00662810446
 

354-4381: FITTING GP-HYDRAULIC

354-4381 FITTING GP-HYDRAULIC -MEDIUM PRESSURE, ELECTRONIC
S/N NHD1-UP
PART OF 349-2284, 383-5342, 500-4160, 500-4161, 500-9248 CONTROL AR-AUXILIARY
i04009380 M0066281
3544381 FITTING GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 196-2036 [1] TEE AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  9X-2492 [1] TEE-O-RING  
2. 296-7059 [1] FITTING AS  
  3K-0360 [1] SEAL-O-RING  
  178-5883 [1] FITTING  
3. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
4. 164-8908 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-0077 [1] CONNECTOR  
 

#M00662810447
 

347-6081: GAUGE GP-SIGHT

347-6081 GAUGE GP-SIGHT -HYDRAULIC OIL LEVEL
S/N NHD1-UP
PART OF 417-2212 TANK & FILTER GP-HYDRAULIC
i04033028 M0066281
3476081 GAUGE GP-SIGHT Parts scheme
  For full view, you need register

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 347-6082 [2] BLOCK  
2. 236-3259 M [2] BOLT-SPECIAL  
3. 236-3257 [1] PIPE  
4. 6F-6672 [4] SEAL-O-RING  
5. 6F-4855 [4] SEAL-O-RING  
  M   METRIC PART
 

#M00662810448
 

344-5281: HEAD GP-PUMP

344-5281 HEAD GP-PUMP -DRIVE
S/N NHD1-UP
PART OF 371-5210 PUMP GP-MAIN HYDRAULIC
i04400966 M0066281
3445281 HEAD GP-PUMP Parts scheme
  For full view, you need register

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 099-3669 B [2] SHIM (1-MM THK)  
  099-3670 B [2] SHIM (1.95-MM THK)  
  099-6109 B [2] SHIM (1.05-MM THK)  
  099-6110 B [2] SHIM (1.1-MM THK)  
  099-6111 B [2] SHIM (1.15-MM THK)  
  099-6112 B [2] SHIM (1.2-MM THK)  
  099-6113 B [2] SHIM (1.25-MM THK)  
  099-6115 B [2] SHIM (1.3-MM THK)  
  099-6117 B [2] SHIM (1.35-MM THK)  
  099-6118 B [2] SHIM (1.4-MM THK)  
  099-6119 B [2] SHIM (1.45-MM THK)  
  099-6120 B [2] SHIM (1.5-MM THK)  
  099-6121 B [2] SHIM (1.55-MM THK)  
  099-6122 B [2] SHIM (1.6-MM THK)  
  099-6123 B [2] SHIM (1.65-MM THK)  
  099-6124 B [2] SHIM (1.7-MM THK)  
  099-6125 B [2] SHIM (1.75-MM THK)  
  099-6126 B [2] SHIM (1.8-MM THK)  
  099-6127 B [2] SHIM (1.85-MM THK)  
  099-6128 B [2] SHIM (1.9-MM THK)  
2. 9S-4191 [1] PLUG (9/16-18-THD)  
3. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
5. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
6. 8T-4133 M [1] NUT (M10X1.5-THD)  
7. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
8. 111-9916 Y [1] VALVE GP-SOLENOID (PRESSURE REDUCING)  
9. 391-0668 [1] COVER  
10. 200-3244 [1] SPRING  
11. 200-3245 [1] SPRING  
12. 200-3246 [1] SPRING  
13. 215-9961 [1] STOPPER  
14. 215-9962 [1] STOPPER  
15. 225-4607 M [2] SETSCREW (M20X2.5X45-MM)  
16. 234-4452 [1] COVER  
17. 234-4453 [1] COVER  
18. 273-8316 [1] SEAL-O-RING  
19. 273-8317 [1] SEAL-O-RING  
20. 273-8318 [1] SEAL-O-RING  
21. 273-8319 [1] SEAL-O-RING  
22. 285-4470 [1] SEAL-O-RING  
23. 391-0665 [1] BODY AS (DRIVE)  
24. 301-6874 [1] RETAINER  
25. 301-8294 [1] ADJUSTER  
26. 094-1875 [1] DOWEL  
27. 094-1881 [1] PLATE-SLIDE  
28. 094-1882 [10] PLUG  
29. 095-1788 [1] RING-BACKUP  
30. 8T-4131 M [2] NUT (M20X2.5-THD)  
31. 6V-8200 M [6] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
32. 099-3671 [1] SPRING  
33. 3J-1907 [2] SEAL-O-RING  
34. 3D-2891 [1] BALL  
35. 251-9567 M [1] NUT (M20X1.5-THD)  
36. 191-5707 [1] SPOOL AS  
37. 190-7674 [1] SEAL-O-RING  
38. 190-7673 [1] SEAL-O-RING  
39. 189-9763 [3] SEAL-O-RING  
40. 185-0201 [1] PIN AS  
  129-7978 [1] DOWEL  
41. 185-0169 [1] GUIDE  
42. 173-3413 [1] COVER  
43. 173-3397 [1] LEVER  
44. 173-3384 [1] PISTON  
45. 150-5797 [1] PIN  
46. 153-8623 [1] RING-BACKUP  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00662810449
 

344-5282: HEAD GP-PUMP

344-5282 HEAD GP-PUMP -DRIVEN
S/N NHD1-UP
PART OF 371-5210 PUMP GP-MAIN HYDRAULIC
i04400960 M0066281
3445282 HEAD GP-PUMP Parts scheme 3445282 HEAD GP-PUMP Parts scheme
  For full view, you need register

Parts for your 320F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 099-3669 B [2] SHIM (1-MM THK)  
  099-3670 B [2] SHIM (1.95-MM THK)  
  099-6109 B [2] SHIM (1.05-MM THK)  
  099-6110 B [2] SHIM (1.1-MM THK)  
  099-6111 B [2] SHIM (1.15-MM THK)  
  099-6112 B [2] SHIM (1.2-MM THK)  
  099-6113 B [2] SHIM (1.25-MM THK)  
  099-6115 B [2] SHIM (1.3-MM THK)  
  099-6117 B [2] SHIM (1.35-MM THK)  
  099-6118 B [2] SHIM (1.4-MM THK)  
  099-6119 B [2] SHIM (1.45-MM THK)  
  099-6120 B [2] SHIM (1.5-MM THK)  
  099-6121 B [2] SHIM (1.55-MM THK)  
  099-6122 B [2] SHIM (1.6-MM THK)  
  099-6123 B [2] SHIM (1.65-MM THK)  
  099-6124 B [2] SHIM (1.7-MM THK)  
  099-6125 B [2] SHIM (1.75-MM THK)  
  099-6126 B [2] SHIM (1.8-MM THK)  
  099-6127 B [2] SHIM (1.85-MM THK)  
  099-6128 B [2] SHIM (1.9-MM THK)  
2. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
4. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
5. 8T-4133 M [1] NUT (M10X1.5-THD)  
6. 6V-8200 M [6] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
7. 3J-1907 [1] SEAL-O-RING  
8. 391-0668 [1] COVER  
9. 200-3244 [1] SPRING  
10. 200-3245 [1] SPRING  
11. 200-3246 [1] SPRING  
12. 215-9961 [1] STOPPER  
13. 215-9962 [1] STOPPER  
14. 225-4607 M [2] SETSCREW (M20X2.5X45-MM)  
15. 234-4452 [1] COVER  
16. 234-4453 [1] COVER  
17. 273-8316 [1] SEAL-O-RING  
18. 273-8317 [1] SEAL-O-RING  
19. 273-8318 [1] SEAL-O-RING  
20. 273-8319 [1] SEAL-O-RING  
21. 285-4470 [1] SEAL-O-RING  
22. 391-0666 [1] BODY AS (DRIVEN)  
23. 301-6874 [1] RETAINER  
24. 301-8294 [1] ADJUSTER  
25. 094-1875 [1] DOWEL  
26. 094-1881 [1] PLATE-SLIDE  
27. 094-1882 [9] PLUG  
28. 095-1788 [1] RING-BACKUP  
29. 8T-4131 M [2] NUT (M20X2.5-THD)  
30. 3D-2891 [1] BALL  
31. 099-3671 [1] SPRING  
32. 251-9567 M [1] NUT (M20X1.5-THD)  
33. 191-5707 [1] SPOOL AS  
34. 190-7674 [1] SEAL-O-RING  
35. 190-7673 [1] SEAL-O-RING  
36. 189-9763 [3] SEAL-O-RING  
37. 185-0201 [1] PIN AS  
  129-7978 [1] DOWEL  
38. 185-0169 [1] GUIDE  
39. 173-3413 [1] COVER  
40. 173-3397 [1] LEVER  
41. 173-3384 [1] PISTON  
42. 153-8623 [1] RING-BACKUP  
43. 150-5797 [1] PIN  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Swing Drive Oil Level - Check
320F Excavator
Swing Drive Oil Sample - Obtain
320F Excavator
Swing Drive Oil - Change
320F Excavator
Specifications
Auxiliary Pump Drive and Mounting
320F, 323F LN Excavator Machine Systems Specifications
Swing Drive
320F, 323F LN Excavator Machine Systems Specifications
Swing Drive
320F, 323F LN Excavator Machine Systems Specifications
Systems Operation
Swing Drive
320F, 323F and 323F LN Excavators Machine Systems
Disassembly and Assembly
Swing Motor - Disassemble
320F, 323F Excavators Machine Systems
Swing Motor - Assemble
320F, 323F Excavators Machine Systems
Swing Drive - Disassemble
320F, 323F Excavators Machine Systems
Swing Drive - Assemble
320F, 323F Excavators Machine Systems
Swing Motor and Swing Drive - Remove and Install
320F, 323F Excavators Machine Systems
Service Magazine
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 320F L :

DRIVE GP-SWING
378-9517 DRIVE GP-SWING
DRIVE & MTG GP-SWING
333-2912 DRIVE & MTG GP-SWING
CYLINDER GP-HYDRAULIC
360-5447 CYLINDER GP-HYDRAULIC
CYLINDER GP-COUPLER
390-9505 CYLINDER GP-COUPLER
CYLINDER GP-BUCKET
469-9353 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
469-9353 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
469-9342 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
469-9342 CYLINDER GP-BUCKET
FILTER & VALVE GP-PILOT
158-8987 FILTER & VALVE GP-PILOT
FILTER GP-OIL
188-4145 FILTER GP-OIL
FILTER GP-OIL
289-8194 FILTER GP-OIL
FILTER GP-OIL
419-8528 FILTER GP-OIL
FITTING GP-HYDRAULIC
214-4513 FITTING GP-HYDRAULIC
FITTING GP-HYDRAULIC
354-4381 FITTING GP-HYDRAULIC
GAUGE GP-SIGHT
347-6081 GAUGE GP-SIGHT
HEAD GP-PUMP
344-5281 HEAD GP-PUMP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.