BASIC ENGINE
CYLINDER BLOCK GPCYLINDER HEAD GP
DAMPER GP
DRIVE GP-FAN
DRIVE GP-PUMP
HOUSING GP-FRONT
BASIC ENGINE
CYLINDER BLOCK GP#M00663640020
223-9252: CYLINDER BLOCK GP
Parts for your C15 GENERATOR SET:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1S-9540 | [1] | DOWEL | |
2. | 4N-1650 | [1] | DOWEL | |
3. | 6I-1055 | [1] | DOWEL | |
4. | 6I-4421 | [1] | PLATE-SPACER | |
5. | 142-2329 | [1] | SEAL | |
6. | 4N-0683 | [2] | DOWEL | |
7. | 227-1204 | [1] | GASKET | |
8. | 2M-6471 | [2] | PLUG-CUP | |
9. | 266-6038 | [2] | DOWEL | |
10. | 357-1317 CY | [1] | CYLINDER BLOCK AS | |
11. | 5P-0840 | [1] | SEAL-O-RING | |
C | CHANGE FROM PREVIOUS TYPE | |||
Y | SEPARATE ILLUSTRATION |
#M00663640021
223-9252: CYLINDER BLOCK GP
Parts for your C15 GENERATOR SET:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1S-9540 | [1] | DOWEL | |
2. | 4N-1650 | [1] | DOWEL | |
3. | 6I-1055 | [1] | DOWEL | |
4. | 6I-4421 | [1] | PLATE-SPACER | |
5. | 142-2329 | [1] | SEAL | |
6. | 4N-0683 | [2] | DOWEL | |
7. | 227-1204 | [1] | GASKET | |
8. | 2M-6471 | [2] | PLUG-CUP | |
9. | 266-6038 | [2] | DOWEL | |
10. | 488-1676 CY | [1] | CYLINDER BLOCK AS | |
11. | 5P-0840 | [1] | SEAL-O-RING | |
C | CHANGE FROM PREVIOUS TYPE | |||
Y | SEPARATE ILLUSTRATION |
#M00663640022
223-7263: CYLINDER HEAD AS
Parts for your C15 GENERATOR SET:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 122-7375 | [24] | GUIDE-VALVE (STANDARD) | |
122-0447 AB | GUIDE-VALVE (0.51-MM OS) | |||
122-8612 AB | GUIDE-VALVE (0.13-MM OS) | |||
2. | 216-5582 | [7] | BUSHING (STANDARD) | |
217-0751 AB | BUSHING (0.25-MM OS) | |||
217-0752 AB | BUSHING (0.762-MM OS) | |||
261-3429 AB | BUSHING (1.778-MM OS) | |||
261-3430 AB | BUSHING (1.27-MM OS) | |||
3. | 280-3979 | [12] | INSERT-VALVE SEAT (INLET)(STANDARD) | |
4. | 226-5561 | [12] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | |
288-4883 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
5. | 263-4920 | [6] | SLEEVE-INJECTOR (INLET) | |
8. | 166-2904 | [12] | SEAL-O-RING | |
9. | 3B-0623 | [17] | PLUG-CUP | |
10. | 3B-0645 | [20] | PLUG-CUP | |
11. | 8T-6757 | [3] | PLUG-PIPE | |
12. | 9X-7430 | [6] | SEAL-O-RING | |
13. | 493-9591 | [1] | HEAD-CYLINDER | |
448-3297 | [1] | HEAD-CYLINDER | ||
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED |
#M00663640023
223-9250: CYLINDER HEAD GP
Parts for your C15 GENERATOR SET:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2A-4429 | [48] | LOCK-RETAINER | |
2. | 6I-0928 | [24] | WASHER-SPECIAL | |
3. | 490-7198 | [12] | VALVE-INLET | |
4. | 490-7200 | [12] | VALVE-EXHAUST | |
5. | 163-2478 | [24] | SEAL-VALVE STEM | |
6. | 247-9908 | [24] | SPRING-VALVE (OUTER) | |
7. | 223-7263 CY | [1] | CYLINDER HEAD AS | |
8. | 186-2001 | [24] | ROTOCOIL AS | |
9. | 211-3122 | [24] | SPRING-VALVE (INNER) | |
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#M00663640024
314-7316: CYLINDER HEAD GP
314-7316 CYLINDER HEAD GP
S/N H5G1-UP
S/N H5G1-UP
Parts for your C15 GENERATOR SET:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 223-9250 Y | [1] | CYLINDER HEAD GP | |
2. | 224-5122 | [1] | GASKET (CYLINDER HEAD) | |
3. | 3E-6772 | [24] | SEAL (WATER) | |
4. | 6I-4025 | [16] | FASTENER GP-CYLINDER HEAD | |
5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
124-1855 | [1] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | ||
5. | 194-8124 | [6] | SLEEVE AS (EXHAUST PORT) | |
6. | 106-5673 | [10] | FASTENER GP-CYLINDER HEAD | |
5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
124-1854 | [1] | BOLT-12 POINT HEAD (3/4-16X8.5-IN) | ||
7. | 5P-0840 | [1] | SEAL-O-RING | |
8. | 183-3407 | [3] | PLUG AS | |
(EACH INCLUDES) | ||||
8A. | 214-7568 | [1] | SEAL-O-RING | |
9S-8004 | [1] | PLUG (9/16-18-THD) | ||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#M00663640025
231-5385: DAMPER GP
231-5385 DAMPER GP
S/N H5G1-UP
S/N H5G1-UP
Parts for your C15 GENERATOR SET:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 6N-7378 | [1] | PULLEY-CRANKSHAFT (4-GROOVE) | |
2. | 213-3199 | [1] | DAMPER AS | |
3. | 232-6560 | [1] | ADAPTER | |
4. | [6] | BOLT (5/8-18X9-IN) | ||
5. | 3H-7654 | [12] | WASHER-HARD (13.5X22.5X3-MM THK) | |
6. | 7X-0591 | [6] | WASHER-HARD (17X29X3-MM THK) | |
7. | 8M-2530 | [12] | BOLT-12 POINT HEAD (1/2-13X1.25-IN) |
#M00663640026
424-7962: DRIVE GP-FAN
Parts for your C15 GENERATOR SET:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 309-8037 Y | [1] | BELT TENSIONER GP (FAN) | |
2. | 333-0776 | [1] | SPACER-SPECIAL | |
3. | 478-2960 | [1] | PULLEY-FAN | |
4. | 422-6569 Y | [1] | ADAPTER GP-FAN | |
5. | 112-9252 | [4] | SPACER (13X25X22.14-MM THK) | |
6. | 132-7551 | [4] | SPACER (11X19X6-MM THK) | |
7. | 1F-7958 | [2] | NUT-FULL (1/2-13-THD) | |
8. | 202-4948 | [2] | STUD-TAPERLOCK | |
9. | 4F-0411 | [4] | BOLT (3/8-16X6.5-IN) | |
10. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
11. | 9S-1366 | [2] | BOLT (1/2-13X2.5-IN) | |
Y | SEPARATE ILLUSTRATION |
#M00663640027
6I-3638: DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
S/N H5G1-UP
FOR USE WITH CUSTOMER SUPPLIED SAE "A" PUMP WITH 11 TOOTH 16/32 DP SPLINE
S/N H5G1-UP
FOR USE WITH CUSTOMER SUPPLIED SAE "A" PUMP WITH 11 TOOTH 16/32 DP SPLINE
#M00663640028
282-6846: FASTENER GP-FRONT COVER
282-6846 FASTENER GP-FRONT COVER
S/N H5G1-UP
S/N H5G1-UP
Parts for your C15 GENERATOR SET:
CATERPILLAR SIS#M00663640029
229-9965: FASTENER GP-FRONT HOUSING
229-9965 FASTENER GP-FRONT HOUSING -WITH AND WITHOUT SOUND PANEL
S/N H5G1-UP
FOR USE WITH WHEN NO FULL FRONT SOUND SUPPRESSION PANEL GROUP IS USED
S/N H5G1-UP
FOR USE WITH WHEN NO FULL FRONT SOUND SUPPRESSION PANEL GROUP IS USED
Parts for your C15 GENERATOR SET:
CATERPILLAR SISInformation:
BASIC ENGINE
CYLINDER BLOCK GP
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}