HYDRAULIC SYSTEM
CYLINDER GPHYDRAULIC SYSTEM
CYLINDER GP
#M00666080600
260-3646: CYLINDER & MTG GP-BLADE TIP
260-3646 CYLINDER & MTG GP-BLADE TIP
S/N N9S1-UP
PART OF 370-0469 HYDRAULIC AR
S/N N9S1-UP
PART OF 370-0469 HYDRAULIC AR
For full view, you need register
Parts for your 14M3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-8944 Y | [1] | CYLINDER GP-BLADE TIP | |
| 2. | 364-1374 C | [2] | PIN AS | |
| 3. | 170-3093 C | [2] | BUSHING | |
| 4. | 248-9337 | [2] | SPACER (39X75X20-MM THK) | |
| 5. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 6. | 8T-4183 CM | [2] | BOLT (M12X1.75X40-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00666080601
274-2141: CYLINDER & MTG GP-CENTERSHIFT
274-2141 CYLINDER & MTG GP-CENTERSHIFT
S/N N9S1-UP
PART OF 370-0469 HYDRAULIC AR
S/N N9S1-UP
PART OF 370-0469 HYDRAULIC AR
For full view, you need register
Parts for your 14M3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-9099 | [2] | CAP | |
| 2. | 308-0540 B | [8] | SHIM (0.5-MM THK) | |
| 3. | 3B-8485 | [2] | ELBOW | |
| 4. | 308-0541 | [4] | INSERT | |
| 5. | 262-1906 Y | [1] | CYLINDER GP-CENTERSHIFT | |
| 6. | 7X-2577 M | [4] | BOLT (M24X3X90-MM) | |
| 7. | 267-3506 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00666080602
506-1050: CYLINDER & MTG GP-SIDESHIFT
506-1050 CYLINDER & MTG GP-SIDESHIFT -SIDESHIFT
S/N N9S1-UP
PART OF 370-0469 HYDRAULIC AR
Type 1
S/N N9S1-UP
PART OF 370-0469 HYDRAULIC AR
Type 1
For full view, you need register
#M00666080603
506-1050: CYLINDER & MTG GP-SIDESHIFT
506-1050 CYLINDER & MTG GP-SIDESHIFT -SIDESHIFT
S/N N9S1-UP
PART OF 370-0469 HYDRAULIC AR
Type 2
S/N N9S1-UP
PART OF 370-0469 HYDRAULIC AR
Type 2
For full view, you need register
Parts for your 14M3 MOTOR GRADER:
CATERPILLAR SIS#M00666080604
384-8469: CYLINDER & MTG GP-STEERING
384-8469 CYLINDER & MTG GP-STEERING
S/N N9S1-UP
PART OF 384-8470 AXLE GP-FRONT
S/N N9S1-UP
PART OF 384-8470 AXLE GP-FRONT
For full view, you need register
Parts for your 14M3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 391-0217 | [2] | PIN AS | |
| 3. | 258-9981 | [2] | SPACER (32.16X38.1X8.65-MM THK) | |
| 4. | 260-6117 | [2] | BALL STUD | |
| 5. | 285-0612 | [2] | CAP AS-DUST | |
| 6. | 384-6751 Y | [1] | CYLINDER GP-STEERING (RH) | |
| 7. | 384-6752 Y | [1] | CYLINDER GP-STEERING (LH) | |
| 8. | 441-8164 | [2] | SEAL-BOOT | |
| 9. | 8B-1002 | [2] | NUT-SLOTTED | |
| 10. | 249-3505 | [2] | RACE-BEARING | |
| 11. | 3B-4629 | [2] | PIN-COTTER | |
| 12. | 3J-8500 | [2] | RING-RETAINING | |
| 13. | 4F-8824 | [2] | SEAL-O-RING | |
| 14. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 16. | 7X-0632 | [2] | WASHER-HARD (11X36X6-MM THK) | |
| 17. | 5T-9400 | [2] | SPACER (12X25X8.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00666080605
260-8713: CYLINDER & MTG GP-WHEEL LEAN
260-8713 CYLINDER & MTG GP-WHEEL LEAN
S/N N9S1-UP
PART OF 384-8470 AXLE GP-FRONT
S/N N9S1-UP
PART OF 384-8470 AXLE GP-FRONT
For full view, you need register
Parts for your 14M3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 264-9726 | [1] | PIN | |
| 2. | 6G-7187 | [1] | LOCK | |
| 3. | 7K-9202 | [4] | SEAL-LIP TYPE | |
| 4. | 249-5299 Y | [1] | CYLINDER GP-WHEEL LEAN | |
| 5. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 6. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 6V-3668 M | [2] | BOLT (M12X1.75X30-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00666080606
505-0590: CYLINDER GP-ARTICULATION
505-0590 CYLINDER GP-ARTICULATION
S/N N9S1-UP
95-MM (3.7-IN) BORE X 297-MM (11.7-IN) STROKE
PART OF 352-5791 CYLINDER & MTG GP-ARTICULATION
S/N N9S1-UP
95-MM (3.7-IN) BORE X 297-MM (11.7-IN) STROKE
PART OF 352-5791 CYLINDER & MTG GP-ARTICULATION
For full view, you need register
Parts for your 14M3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 521-9608 | [1] | RING-BACKUP | |
| 2. | 6R-0365 | [1] | SEAL-O-RING | |
| 3. | 3E-6735 | [1] | SEAL-O-RING | |
| 4. | 9X-8399 | [1] | WASHER (33X56X6-MM THK) | |
| 5. | 140-0249 | [1] | RING-WEAR | |
| 6. | 167-2199 | [1] | SEAL AS-BUFFER | |
| 7. | 167-2306 | [1] | SEAL-U-CUP | |
| 8. | 173-9683 M | [1] | BOLT (M30X3.5X90-MM) | |
| 9. | 233-0625 | [1] | SEAL-WIPER | |
| 10. | 261-3637 | [1] | RING-WEAR | |
| 11. | 261-3644 | [1] | SEAL AS | |
| 12. | 266-7376 | [1] | HEAD | |
| 13. | 304-0435 | [1] | PISTON | |
| 14. | 372-2661 | [1] | CYLINDER AS | |
| 14A. | [1] | BEARING-SLEEVE | ||
| 15. | 510-6466 | [1] | ROD AS | |
| M | METRIC PART | |||
#M00666080607
9T-8944: CYLINDER GP-BLADE TIP
9T-8944 CYLINDER GP-BLADE TIP
S/N N9S1-UP
101.6-MM (4-IN) BORE X 355.5-MM (9.03-IN) STROKE
PART OF 260-3646 CYLINDER & MTG GP-BLADE TIP
S/N N9S1-UP
101.6-MM (4-IN) BORE X 355.5-MM (9.03-IN) STROKE
PART OF 260-3646 CYLINDER & MTG GP-BLADE TIP
For full view, you need register
Parts for your 14M3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-8943 | [1] | CYLINDER AS | |
| 4D-0298 | [1] | BEARING | ||
| 2. | 173-9683 M | [1] | BOLT (M30X3.5X90-MM) | |
| 3. | 3S-7023 | [1] | WASHER (34X57X6-MM THK) | |
| 4. | 9T-3133 | [1] | PISTON | |
| 5. | 5J-5402 J | [1] | SEAL AS | |
| 6. | 6J-2797 J | [1] | RING-WEAR | |
| 7. | 6E-1049 | [1] | ROD AS | |
| 4D-0298 | [1] | BEARING | ||
| 8. | 4T-5613 JN | [1] | RING-WEAR | |
| 9. | 289-2935 JN | [1] | SEAL AS-BUFFER | |
| 10. | 289-2946 JN | [1] | SEAL-U-CUP | |
| 11. | 308-1845 JN | [1] | SEAL-WIPER | |
| 12. | 175-7900 J | [1] | SEAL-O-RING | |
| 13. | 2K-6830 J | [1] | RING-BACKUP | |
| 14. | 6E-0775 | [1] | HEAD AS | |
| 229-9382 | SEAL-WIPER | |||
| AVAILABLE REPAIR KIT(S): | ||||
| 233-9205 J | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
| (STANDARD SIZE BORE) | ||||
| (INCLUDES RINGS & SEALS) | ||||
| (FOR USE WITH REHS1392) | ||||
| 233-9207 N | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
| (OVERSIZE BORE 0.76-MM) | ||||
| (INCLUDES RINGS & SEALS) | ||||
| (FOR USE WITH REHS1392) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| N | KIT MARKED N SERVICES PART(S) MARKED N | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#M00666080608
262-1906: CYLINDER GP-CENTERSHIFT
262-1906 CYLINDER GP-CENTERSHIFT
S/N N9S1-UP
88.9-MM (3.5-IN) BORE X 471.5-MM (18.6-IN) STROKE
PART OF 274-2141 CYLINDER & MTG GP-CENTERSHIFT
S/N N9S1-UP
88.9-MM (3.5-IN) BORE X 471.5-MM (18.6-IN) STROKE
PART OF 274-2141 CYLINDER & MTG GP-CENTERSHIFT
For full view, you need register
Parts for your 14M3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6E-4975 | [1] | HEAD AS | |
| 231-3538 J | [1] | SEAL-WIPER | ||
| 2. | 9T-8043 | [1] | PISTON | |
| 3. | 262-1922 | [1] | ROD AS | |
| 4. | 262-1928 | [1] | CYLINDER AS | |
| 5. | 167-2200 J | [1] | SEAL AS | |
| 6. | 167-2307 J | [1] | SEAL-U-CUP | |
| 7. | 173-9683 M | [1] | BOLT (M30X3.5X90-MM) | |
| 8. | 175-7898 J | [1] | SEAL-O-RING | |
| 9. | 231-3538 J | [1] | SEAL-WIPER | |
| 10. | 4J-9224 J | [1] | RING-BACKUP | |
| 11. | 4T-8054 J | [1] | SEAL AS | |
| 12. | 7J-9885 J | [1] | RING-WEAR | |
| 13. | 8T-4958 J | [1] | RING-WEAR | |
| 14. | 9X-8399 | [1] | WASHER (33X56X6-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 235-0355 J | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
| (INCLUDES RINGS & SEALS) | ||||
| (FOR USE WITH REHS1392) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
#M00666080609
422-5457: CYLINDER GP-LIFT
422-5457 CYLINDER GP-LIFT -BLADE LIFT
S/N N9S1-UP
89-MM (3.5-IN) BORE X 1041.5-MM (41-IN) STROKE
PART OF 352-5794 CYLINDER & MTG GP-BLADE LIFT
S/N N9S1-UP
89-MM (3.5-IN) BORE X 1041.5-MM (41-IN) STROKE
PART OF 352-5794 CYLINDER & MTG GP-BLADE LIFT
For full view, you need register
Parts for your 14M3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 365-7413 | [1] | CYLINDER AS | |
| 1A. | 8J-6018 | [2] | BUSHING | |
| 8Y-4489 M | [1] | BOSS (M10X1.5-THD) | ||
| 2. | 6E-4975 | [1] | HEAD AS | |
| 231-3538 | [1] | SEAL-WIPER | ||
| 3. | 167-2200 | [1] | SEAL AS | |
| 4. | 4J-9224 | [1] | RING-BACKUP | |
| 5. | 175-7898 | [1] | SEAL-O-RING | |
| 6. | 422-5458 | [1] | ROD AS | |
| 7. | 9T-8043 | [1] | PISTON | |
| 8. | 7J-9885 | [1] | RING-WEAR | |
| 9. | 231-3538 | [1] | SEAL-WIPER | |
| 10. | 421-4024 | [1] | SEAL-U-CUP | |
| 11. | 8T-4958 | [1] | RING-WEAR | |
| 12. | 473-1733 | [1] | WASHER (31.5X50X6-MM THK) | |
| 13. | 173-9683 M | [1] | BOLT (M30X3.5X90-MM) | |
| 14. | 4T-8054 | [1] | SEAL AS | |
| AVAILABLE REPAIR KIT(S): | ||||
| 235-0355 | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
| (INCLUDES BACKUP-RINGS, SEAL AS, WEAR-RINGS, O-RING SEAL, WIPER SEAL & U-CUP SEAL) | ||||
| M | METRIC PART | |||
