ELECTRICAL AND STARTING SYSTEM
SENSOR GPWIRING GP
POWER TRAIN
AXLE GPDRIVE GP-FINAL
TRANSMISSION GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
#M00667880360
363-4325: WIRING GP-SENSOR
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 491-1256 C | [1] | BRACKET AS | |
| 2. | 276-6146 | [1] | SENSOR AS-ANGLE (AS400TC)(MAINFALL) | |
| 2A. | 276-6146 | [1] | SENSOR AS-ANGLE (AS400TC)(BLADE SLOPE) | |
| 3. | 363-0347 | [1] | SENSOR AS-ROTARY POSITION | |
| 269-3277 | [1] | RING | ||
| 4. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 5. | 491-1257 C | [1] | BRACKET | |
| 6. | 3S-2093 | [3] | STRAP-CABLE | |
| 7. | 498-8523 C | [2] | COLLAR | |
| 8. | 4M-6425 | [2] | BOLT (5/16-18X1-IN) | |
| 9. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 10. | 9X-2043 CM | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 11. | 8T-3844 M | [4] | BOLT (M6X1X70-MM) | |
| 12. | 8T-4223 C | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 329-3356 CM | [2] | NUT (M12X1.75-THD) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#M00667880361
426-6936: WIRING GP-SENSOR
426-6936 WIRING GP-SENSOR
S/N TXX1-UP
PART OF 415-2860, 415-3375, 422-3849, 422-3850, 533-3199, 533-3200, 533-3201, 533-3202 ENGINE AR-COMPLETE
S/N TXX1-UP
PART OF 415-2860, 415-3375, 422-3849, 422-3850, 533-3199, 533-3200, 533-3201, 533-3202 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 6K-0806 | [4] | STRAP-CABLE | |
| 3. | 426-6930 Y | [1] | HARNESS AS-WIRING (FUEL) | |
| 4. | 206-1345 | [2] | STRAP-CABLE | |
| 5. | 352-3970 | [2] | CLIP (LADDER) | |
| 6. | 3E-4352 | [5] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 7. | 4P-7581 | [2] | CLIP (LADDER) | |
| 8. | 4P-8134 | [1] | CLIP (LADDER) | |
| 9. | 5P-7970 M | [3] | NUT (M8X1.25-THD) | |
| 10. | 6V-3940 M | [1] | BOLT (M8X1.25X25-MM) | |
| 11. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00667880362
370-3254: WIRING GP-UNIT INJECTOR
370-3254 WIRING GP-UNIT INJECTOR
S/N TXX1-UP
PART OF 415-2860, 422-3849, 533-3199, 533-3201 ENGINE AR-COMPLETE
FOR USE WITH CAT BRAKES AND COOLANT TEMP JUMPER HARNESS
CANNOT BE USED WITH NON-BRAKE ENGINES, ENGINES WITH NO CENTER BRAKE, LOW PROFILE VALVE COVER
S/N TXX1-UP
PART OF 415-2860, 422-3849, 533-3199, 533-3201 ENGINE AR-COMPLETE
FOR USE WITH CAT BRAKES AND COOLANT TEMP JUMPER HARNESS
CANNOT BE USED WITH NON-BRAKE ENGINES, ENGINES WITH NO CENTER BRAKE, LOW PROFILE VALVE COVER
For full view, you need register
#M00667880363
370-3260: WIRING GP-UNIT INJECTOR
370-3260 WIRING GP-UNIT INJECTOR
S/N TXX1-UP
PART OF 415-3375, 422-3850, 533-3200, 533-3202 ENGINE AR-COMPLETE
FOR USE WITH COOLANT TEMPERATURE JUMPER
CANNOT BE USED WITH CAT BRAKES, MEDIUM BRAKE
S/N TXX1-UP
PART OF 415-3375, 422-3850, 533-3200, 533-3202 ENGINE AR-COMPLETE
FOR USE WITH COOLANT TEMPERATURE JUMPER
CANNOT BE USED WITH CAT BRAKES, MEDIUM BRAKE
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-6508 | [6] | CAP AS | |
| 2. | 418-7619 Y | [1] | HARNESS AS-ENGINE | |
| 3. | 237-9960 | [5] | CLIP (LADDER) | |
| 4. | 359-4892 | [1] | RING-RETAINING | |
| 5. | 359-4893 | [1] | RING-RETAINING | |
| 6. | 3S-2093 | [5] | STRAP-CABLE | |
| 7. | 5P-0537 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 8. | 6V-8837 M | [5] | BOLT (M6X1X16-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00667880364
384-8471: AXLE AR-FRONT
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS#M00667880365
384-8470: AXLE GP-FRONT
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-3934 | [2] | CUP-BEARING | |
| 2. | 1P-3935 | [2] | CONE-BEARING | |
| 3. | 1P-4693 | [2] | CUP-BEARING | |
| 4. | 1P-4694 | [2] | CONE-BEARING | |
| 5. | 2G-5667 | [3] | RETAINER | |
| 6. | 2G-8615 | [4] | WASHER-THRUST (2.015X3.625X0.11-IN THK) | |
| 7. | 2G-8626 | [2] | WASHER-THRUST (2.02X3.63X0.16-IN THK) | |
| 8. | 2G-8741 | [4] | RING-METAL SEAL | |
| 9. | 2G-8777 | [4] | SEAL | |
| 10. | 3B-8489 | [12] | FITTING-GREASE (1/8-27 PTF) | |
| 11. | 5K-1078 | [2] | SEAL GP-DUO-CONE | |
| 12. | 5T-0907 | [2] | COVER | |
| 13. | 7K-9202 | [4] | SEAL-LIP TYPE | |
| 14. | 8D-3615 | [2] | RETAINER | |
| 15. | 257-9799 | [4] | PIN | |
| 16. | 258-8716 | [1] | ARM AS (LH) | |
| 16A. | 2G-7387 | [1] | BUSHING | |
| 16B. | 2G-7388 | [1] | BUSHING | |
| 17. | 258-8719 | [1] | ARM AS (RH) | |
| 17A. | 2G-7387 | [1] | BUSHING | |
| 17B. | 2G-7388 | [1] | BUSHING | |
| 18. | 258-8739 | [2] | PIN | |
| 19. | 259-1843 | [1] | BAR AS | |
| 19A. | 2G-8631 | [1] | BUSHING | |
| 20. | 259-2622 | [4] | WASHER (11X60X3-MM THK) | |
| 21. | 260-8713 Y | [1] | CYLINDER & MTG GP-WHEEL LEAN | |
| 22. | 266-9715 | [1] | HOUSING-SPINDLE (LH) | |
| 23. | 266-9716 | [1] | HOUSING-SPINDLE (RH) | |
| 24. | 274-6817 Y | [1] | LINK GP-STEERING | |
| 25. | 280-2822 | [2] | SPINDLE | |
| 26. | 297-2538 | [2] | LOCK | |
| 27. | 384-8469 Y | [1] | CYLINDER & MTG GP-STEERING | |
| 28. | 421-1654 Y | [1] | AXLE GP-FRONT | |
| 29. | 148-8410 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | ||
| 30. | 198-4768 | [3] | WASHER-HARD (17.5X32X8-MM THK) | |
| 31. | 266-7315 | [2] | WASHER-HARD (22X65X6-MM THK) | |
| 32. | 3B-4640 | [2] | PIN-COTTER | |
| 33. | 5P-8890 | [2] | SEAL-LIP TYPE | |
| 34. | 6V-5696 M | [6] | BOLT (M12X1.75X80-MM) | |
| 35. | 6V-5844 M | [3] | BOLT (M16X2X35-MM) | |
| 36. | 6V-8237 | [2] | WASHER (26X44X4-MM THK) | |
| 37. | 7X-0851 M | [2] | NUT (M24X3-THD) | |
| 38. | 7X-2561 M | [4] | BOLT (M20X2.5X35-MM) | |
| 39. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 40. | 8F-9516 | [2] | SEAL-O-RING | |
| 41. | 8T-0667 M | [2] | BOLT (M24X3X100-MM) | |
| 42. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 43. | 9M-2092 | [4] | SEAL-O-RING | |
| 44. | 9X-2125 M | [4] | BOLT-LOCKING (M10X1.5X25-MM) | |
| 45. | 2G-3867 B | [6] | SHIM (0.005-IN THK) | |
| 46. | 3B-8488 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00667880366
421-1654: AXLE GP-FRONT
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS#M00667880367
384-8474: AXLE GP-REAR
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 205-4120 | [1] | PISTON | |
| 2. | 215-9665 B | [1] | SHIM PACK (INCLUDES 12-SHIMS) | |
| 3. | 235-5869 | [1] | SEAL-D-RING | |
| 4. | 235-5871 | [1] | SEAL-D-RING | |
| 5. | 248-0833 | [1] | PLUG AS-DRAIN (REAR AXLE) | |
| 259-7138 | [1] | PLUG | ||
| 3S-9233 | [1] | SEAL-O-RING | ||
| 5L-4759 | [1] | SEAL-O-RING | ||
| 6. | 253-9736 | [2] | SHAFT-AXLE | |
| 7. | 259-6939 | [54] | STUD-TAPERLOCK | |
| 8. | 280-4436 | [1] | TUBE AS | |
| 9. | 280-4438 | [2] | PLUG | |
| 10. | 290-2544 | [6] | DOWEL | |
| 11. | 290-4050 | [1] | TUBE AS | |
| 12. | 308-0888 | [1] | BEARING AS | |
| 13. | 313-4675 | [2] | GEAR AS-SUN | |
| (EACH INCLUDES) | ||||
| 7S-2942 | [1] | RING-RETAINING | ||
| 14. | 317-1009 | [2] | WASHER (18X35X8-MM THK) | |
| 15. | 317-2403 | [1] | SEAL-O-RING | |
| 16. | 364-2077 | [1] | HOUSING AS | |
| 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 8T-3957 M | [4] | BOLT-SOCKET HEAD (M12X1.75X30-MM) | ||
| 6V-3823 M | [4] | BOLT (M12X1.75X60-MM) | ||
| 17. | 364-2079 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP | |
| 18. | 380-0726 B | [1] | SHIM | |
| 19. | 384-8472 Y | [1] | DRIVE GP-FINAL (LH) | |
| 20. | 384-8473 Y | [1] | DRIVE GP-FINAL (RH) | |
| 21. | 148-8369 | [1] | ELBOW AS | |
| 6V-8628 | [1] | ELBOW | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 22. | 198-4769 | [54] | WASHER (22X40X10-MM THK) | |
| 23. | 1S-5008 | [2] | RING-RETAINING | |
| 24. | 215-8202 | [1] | BEARING AS-ROLLER | |
| 25. | 4F-6568 | [2] | SPACER (0.813X1.5X0.625-IN THK) | |
| 26. | 4J-5351 | [2] | SEAL-O-RING | |
| 27. | 4K-1388 | [2] | SEAL-O-RING | |
| 28. | 6V-3532 M | [6] | BOLT (M20X2.5X60-MM) | |
| 29. | 6V-3669 M | [2] | BOLT (M20X2.5X80-MM) | |
| 30. | 6V-7742 M | [54] | NUT-FULL (M20X2.5-THD) | |
| 31. | 6V-8397 | [2] | SEAL-O-RING | |
| 32. | 6V-9168 | [2] | NUT (11/16-16-THD) | |
| 33. | 7M-8485 | [1] | SEAL-O-RING | |
| 34. | 8F-6230 | [1] | SEAL-O-RING | |
| 35. | 8T-0088 M | [8] | BOLT (M16X2X65-MM) | |
| 36. | 8T-3282 | [8] | WASHER-HARD (22X35X3.5-MM THK) | |
| 37. | 9X-8268 | [8] | WASHER (17.5X30X3.5-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00667880368
272-8010: CARRIER GP-FINAL DRIVE
272-8010 CARRIER GP-FINAL DRIVE
S/N E9S1-UP
PART OF 384-8472, 384-8473 DRIVE GP-FINAL
S/N E9S1-UP
PART OF 384-8472, 384-8473 DRIVE GP-FINAL
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 365-8946 | [6] | WASHER-THRUST | |
| 2. | 361-3223 | [3] | GEAR-PLANETARY (29-TEETH) | |
| 3. | 353-7482 | [6] | BEARING-NEEDLE | |
| 4. | 263-4902 | [3] | RETAINER | |
| 5. | 263-4903 | [1] | CARRIER-PLANETARY (66-TEETH) | |
| 6. | 263-4904 | [3] | SHAFT | |
| 7. | 3E-4353 | [6] | WASHER-HARD (11X25X3-MM THK) | |
| 8. | 6V-7732 M | [6] | BOLT (M10X1.5X25-MM) | |
| M | METRIC PART | |||
#M00667880369
381-0673: CASE & PARTS GP-PLANETARY
381-0673 CASE & PARTS GP-PLANETARY
S/N DM31-UP
PART OF 381-0675 TRANSMISSION AR
S/N DM31-UP
PART OF 381-0675 TRANSMISSION AR
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8E-5157 | [4] | RACE-BEARING OUTER | |
| 2. | 250-0951 | [1] | RACE-BEARING | |
| 3. | 250-0953 | [1] | RACE-BEARING | |
| 4. | 2H-6489 | [1] | RACE-BEARING OUTER | |
| 5. | 5P-2304 | [2] | RACE & ROLLER AS | |
| 6. | 2S-3029 | [1] | BALL BEARING | |
| 7. | 6K-4718 | [1] | BEARING | |
| 8. | 6V-0852 | [1] | CAP-DUST | |
| 9. | 6V-1720 | [1] | PLATE-SERIAL NUMBER (TRANSMISSION) | |
| 10. | 9W-1454 | [4] | COVER | |
| 11. | 9W-6465 | [1] | RETAINER-BEARING | |
| 12. | 145-8039 | [3] | LOCK | |
| 13. | 164-5567 | [1] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 14. | 165-4929 | [2] | PLUG AS-MAGNETIC (AXLE OIL DRAIN) | |
| (EACH INCLUDES) | ||||
| 5P-4484 | [1] | PLUG-MAGNETIC | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 15. | 188-2162 | [1] | COVER | |
| 16. | 197-4977 | [1] | PLUG AS | |
| 5P-4483 | [1] | PLUG | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 17. | 233-8134 | [1] | GEAR AS (44-TEETH) | |
| 4K-8603 | [1] | PLUG-CUP | ||
| 18. | 251-6673 | [1] | FILTER-MAGNETIC (TRANSMISSION SUMP) | |
| 19. | 251-6674 | [1] | SCREEN-SUCTION (TRANSMISSION SUMP) | |
| 20. | 253-5303 | [1] | GUARD | |
| 21. | 253-5322 | [2] | GUARD | |
| 22. | 263-7429 | [1] | TUBE AS | |
| 23. | 290-3263 | [1] | PLATE | |
| 24. | 299-8905 | [1] | PLATE AS | |
| 8T-3490 M | [6] | NUT-WELD (M10X1.5-THD) | ||
| 25. | 322-3260 | [1] | BRACKET AS | |
| 8T-3851 M | [1] | BOSS-WELD (M10X1.5X17.5-MM) | ||
| 26. | 345-1999 | [1] | PLATE AS | |
| 27. | 431-8814 | [1] | COVER AS | |
| 5M-7937 | [2] | DOWEL | ||
| 28. | 455-7895 | [1] | CASE AS-TRANSMISSION | |
| 6Y-3083 | [6] | PLUG | ||
| 7T-6496 | [2] | PLUG | ||
| 8M-6521 | [2] | DOWEL | ||
| 29. | 148-8309 | [1] | ADAPTER AS | |
| 2P-8421 | [1] | ADAPTER-O-RING | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 31. | 148-8409 | [5] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 9S-8008 | [1] | PLUG (1-1/16-12-THD) | ||
| 32. | 160-8492 M | [1] | BOLT (M10X1.5X85-MM) | |
| 33. | 164-5619 | [5] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 9S-8006 | [1] | PLUG (7/8-14-THD) | ||
| 34. | 183-7262 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 2S-4078 | [1] | SEAL-O-RING | ||
| 9S-8010 | [1] | PLUG | ||
| 35. | 1B-5170 | [1] | PLUG-PIPE | |
| 36. | 3K-0715 | [1] | SEAL-O-RING | |
| 37. | 4J-8996 | [2] | SEAL-O-RING | |
| 38. | 5F-3092 | [1] | SEAL-O-RING | |
| 39. | 5P-3863 | [4] | SEAL-O-RING | |
| 40. | 6V-1820 M | [1] | BOLT (M10X1.5X30-MM) | |
| 41. | 6V-3940 M | [4] | BOLT (M8X1.25X25-MM) | |
| 42. | 6V-8212 M | [1] | BOLT (M10X1.5X16-MM) | |
| 43. | 8C-3210 M | [2] | BOLT (M6X1X16-MM) | |
| 44. | 8T-4121 | [50] | WASHER-HARD (11X21X2.5-MM THK) | |
| 45. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| 46. | 8T-4178 M | [43] | BOLT (M10X1.5X90-MM) | |
| 47. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 48. | 8T-4908 M | [12] | BOLT (M8X1.25X25-MM) | |
| 49. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 50. | 9W-7038 | [1] | RING-SNAP | |
| 51. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 52. | 164-4180 | [1] | PLUG AS | |
| 7M-8485 | [1] | SEAL-O-RING | ||
| 9S-4181 | [1] | PLUG (1-5/16-12-THD) | ||
| 53. | 455-9193 | [1] | VALVE GP-RELIEF | |
| 2H-3932 | [1] | SEAL-O-RING | ||
| 6V-8116 | [1] | RING-RETAINING | ||
| 136-9301 | [1] | SPRING | ||
| 456-0097 | [1] | PLUG AS | ||
| 9J-8580 | [1] | PIN | ||
| 54. | 148-8406 | [5] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 9S-9334 | [1] | PLUG (1-5/16-12-THD) | ||
| 55. | 6V-5759 | [1] | SEAL-O-RING | |
| 56. | 1U-8846 B | SEALANT-GASKET | ||
| 57. | 9X-2097 M | [1] | STUD (M8X1.25-THD) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
