OPERATOR STATION
SEAT GPSUPPORT GP
SEAT GP
OPERATOR STATION
SEAT GP
#M00667880700
421-1286: SEAT GP-SUSPENSION
421-1286 SEAT GP-SUSPENSION -CLOTH, HEATED
S/N E9S1-UP
24-VOLT
PART OF 385-8713 SEAT & MOUNTING GP
S/N E9S1-UP
24-VOLT
PART OF 385-8713 SEAT & MOUNTING GP
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 241-5786 | [1] | HARNESS AS-HEATER (SEAT) | |
| 2. | 256-8768 Y | [1] | SUSPENSION GP-SEAT | |
| 3. | 489-6482 CY | [1] | SEAT GP (CLOTH, HEATED) | |
| 4. | 173-7035 | [1] | KIT-SLIDER BLOCK (SUSPENSION SEAT) | |
| (INCLUDES WASHERS, BOLT, BLOCKS & SETSCREWS) | ||||
| 5. | 498-4463 C | [1] | KIT-LITERATURE HOLDER | |
| 4K-9429 | [6] | RIVET-POP | ||
| 5P-7957 | [1] | LANYARD | ||
| 173-2052 | [1] | RETAINER | ||
| 178-7907 | [1] | HOLDER (LITERATURE) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00667880701
421-1287: SEAT GP-SUSPENSION
421-1287 SEAT GP-SUSPENSION -DELUXE
S/N E9S1-UP
24-VOLT
PART OF 385-8714 SEAT & MOUNTING GP
Type 1
S/N E9S1-UP
24-VOLT
PART OF 385-8714 SEAT & MOUNTING GP
Type 1
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 256-8768 Y | [1] | SUSPENSION GP-SEAT | |
| 2. | 365-3536 | [1] | HARNESS AS-HEATER | |
| 3. | 489-6504 CY | [1] | SEAT GP (DELUXE) | |
| 4. | 173-7035 | [1] | KIT-SLIDER BLOCK (SUSPENSION SEAT) | |
| (INCLUDES WASHERS, BOLT, BLOCKS & SETSCREWS) | ||||
| 5. | 498-4463 C | [1] | KIT-LITERATURE HOLDER | |
| 4K-9429 | [6] | RIVET-POP | ||
| 5P-7957 | [1] | LANYARD | ||
| 173-2052 | [1] | RETAINER | ||
| 178-7907 | [1] | HOLDER (LITERATURE) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00667880702
421-1287: SEAT GP-SUSPENSION
421-1287 SEAT GP-SUSPENSION -DELUXE
S/N E9S1-UP
24-VOLT
PART OF 385-8714 SEAT & MOUNTING GP
Type 2
S/N E9S1-UP
24-VOLT
PART OF 385-8714 SEAT & MOUNTING GP
Type 2
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 256-8768 Y | [1] | SUSPENSION GP-SEAT | |
| 2. | 498-4463 | [1] | KIT-LITERATURE HOLDER | |
| 4K-9429 | [6] | RIVET-POP | ||
| 5P-7957 | [1] | LANYARD | ||
| 173-2052 | [1] | RETAINER | ||
| 178-7907 | [1] | HOLDER (LITERATURE) | ||
| 3. | 489-6504 Y | [1] | SEAT GP (DELUXE) | |
| 4. | 173-7035 | [1] | KIT-SLIDER BLOCK (SUSPENSION SEAT) | |
| (INCLUDES WASHERS, BOLT, BLOCKS & SETSCREWS) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00667880703
443-8216: SEAT GP-SUSPENSION
443-8216 SEAT GP-SUSPENSION -CLOTH
S/N E9S1-UP
PART OF 443-8261 SEAT GP-SUSPENSION
S/N E9S1-UP
PART OF 443-8261 SEAT GP-SUSPENSION
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 143-1288 | [10] | LOCKNUT-FLANGE (3/8-16-THD) | |
| 2. | 164-4883 | [1] | KNOB-LUMBAR | |
| 3. | 177-1863 | [2] | BOLT-PIVOT (3/8-16X2.89-IN) | |
| 4. | 218-2529 | [3] | PLUG | |
| 5. | 229-1494 | [1] | EXTENSION GP-BACKREST (CLOTH) | |
| 6. | 262-0767 | [1] | BRACKET AS (LH) | |
| 7. | 277-8103 | [3] | PLUG | |
| 8. | 292-6402 Y | [1] | PAN GP-BACKREST (LUMBAR) | |
| 9. | 314-5162 | [1] | BRACKET AS (RH) | |
| 11. | 355-3016 | [1] | PLATE AS | |
| 12. | 369-9004 | [1] | CABLE AS | |
| 13. | 389-0879 | [1] | PAN-SEAT BACK | |
| 14. | 171-1230 | [6] | SCREW-BUTTON HEAD (3/8-16X1-IN) | |
| 15. | 8T-7566 | [1] | PIN-SPRING | |
| 16. | 9F-5975 | [1] | BOLT (5/16-18X0.75-IN) | |
| 17. | 436-1687 | [1] | KIT-LATCH | |
| (INCLUDES BOLTS, LATCHES, RODS, SPRINGS & WASHERS) | ||||
| 18. | 436-1688 | [1] | KIT-SEAT | |
| (INCLUDES RETAINERS, ROD, SPRINGS & WASHERS) | ||||
| 19. | 442-5287 | [1] | KIT-SHAFT | |
| 20. | 443-8573 | [1] | KIT-HANDLE (SEAT ADJUSTMENT) | |
| (INCLUDES LEVERS, RETAINERS, SPRINGS, WASHERS & ROD) | ||||
| 21. | 446-0635 | [1] | KIT-SEAT CUSHION (CLOTH) | |
| (INCLUDES CUSHIONS, SCREWS, SEAT PAN & OPERATOR STATION HARNESS) | ||||
| 22. | 294-5042 | [2] | SPACER (11.1X19.5X9.67-MM THK) | |
| 23. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#M00667880704
443-8261: SEAT GP-SUSPENSION
443-8261 SEAT GP-SUSPENSION -CLOTH
S/N E9S1-UP
PART OF 369-6086 SEAT & MOUNTING GP
Type 1
S/N E9S1-UP
PART OF 369-6086 SEAT & MOUNTING GP
Type 1
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS#M00667880705
443-8261: SEAT GP-SUSPENSION
443-8261 SEAT GP-SUSPENSION -CLOTH
S/N E9S1-UP
PART OF 369-6086 SEAT & MOUNTING GP
Type 2
S/N E9S1-UP
PART OF 369-6086 SEAT & MOUNTING GP
Type 2
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 160-7165 Y | [1] | SUSPENSION GP-SEAT | |
| 2. | 489-6481 CY | [1] | SEAT GP-SUSPENSION (CLOTH) | |
| 3. | 173-7035 | [1] | KIT-SLIDER BLOCK (SUSPENSION SEAT) | |
| (INCLUDES BOLT, BLOCKS, SETSCREWS, & WASHERS) | ||||
| 4. | 498-4463 C | [1] | KIT-LITERATURE HOLDER | |
| (INCLUDES LANYARD, RETAINER, HOLDER & RIVET-POP) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00667880706
489-6481: SEAT GP-SUSPENSION
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| 2. | 229-1494 | [1] | EXTENSION GP-BACKREST (CLOTH) | |
| 117-4491 | [1] | ROD | ||
| 3. | 277-8103 | [3] | PLUG | |
| 4. | 355-3016 | [1] | PLATE AS | |
| 5. | 488-2137 | [1] | KIT-SHAFT (RECLINER) | |
| (INCLUDES SHAFT, CABLE AS, LEVERS, RECLINERS & BOLT) | ||||
| 6. | 389-0879 | [1] | PAN-SEAT BACK | |
| 7. | 488-1670 | [1] | PAN AS | |
| 8. | 436-1687 | [1] | KIT-LATCH (SEAT ADJUSTMENT) | |
| (INCLUDES BOLTS, LATCHES, RODS, SPRINGS & WASHERS) | ||||
| 9. | 436-1688 | [1] | KIT-SEAT (TILT) | |
| (INCLUDES RETAINERS, ROD, SPRINGS & WASHERS) | ||||
| 10. | 443-8573 | [1] | KIT-HANDLE (SEAT ADJUSTMENT) | |
| (INCLUDES ROD, LEVERS, SPRINGS & WASHERS) | ||||
| 11. | 446-0635 | [1] | KIT-SEAT CUSHION (CLOTH) | |
| (INCLUDES CUSHIONS, SCREWS, SEAT PAN & OPERATOR STATION HARNESS) | ||||
| M | METRIC PART | |||
#M00667880707
345-1271: SUPPORT GP-CONTROL
345-1271 SUPPORT GP-CONTROL -JOYSTICK, RH
S/N E9S1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
S/N E9S1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 172-8591 M | [10] | NUT-CLIP (M6X1-THD) | |
| 2. | 8X-1386 | [1] | SPACER (12.2X23X22-MM THK) | |
| 3. | 233-3248 | [2] | BUSHING | |
| 4. | 233-3252 | [1] | SHAFT AS | |
| 5. | 233-3270 | [1] | SUPPORT AS (RH) | |
| 6. | 233-3275 | [1] | BRACKET AS (RH) | |
| 7. | 251-2247 | [2] | GROMMET | |
| 8. | 252-1805 Y | [1] | CUSHION GP-ARM | |
| 9. | 252-1808 | [1] | SUPPORT AS (RH) | |
| 3G-0622 | [2] | RING-RETAINING | ||
| 7X-0605 | [2] | WASHER-HARD (13X28X1.6-MM THK) | ||
| 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | ||
| 114-6658 | [2] | WASHER (6.5X17X1-MM THK) | ||
| 294-1001 | [1] | PLATE AS | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 10. | 253-3482 | [1] | KNOB AS (ARMREST ADJUSTMENT) | |
| 11. | 253-3483 | [1] | PLATE AS | |
| 12. | 253-3484 | [2] | WASHER (13X46X3.5-MM THK) | |
| 13. | 292-0609 Y | [1] | ARMREST GP (RH) | |
| 14. | 456-1559 | [1] | ADJUSTER AS | |
| 15. | 345-1273 | [1] | COVER | |
| 16. | 345-1274 | [1] | COVER | |
| 17. | 346-0626 | [1] | BRACKET | |
| 18. | 346-9581 | [1] | FILM-IDENTIFICATION (OPERATOR CONTROLS, RH) | |
| 19. | 114-6658 | [10] | WASHER (6.5X17X1-MM THK) | |
| 20. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 21. | 7J-5925 | [1] | PIN-COTTER | |
| 22. | 7X-0578 | [2] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 23. | 8T-4200 M | [3] | BOLT (M8X1.25X16-MM) | |
| 24. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 8T-4908 M | [7] | BOLT (M8X1.25X25-MM) | |
| 26. | 9X-2043 M | [2] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 27. | 9X-2045 M | [10] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 28. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 29. | 8T-6936 D | SEAL (0.1-M EACH) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00667880708
345-1272: SUPPORT GP-CONTROL
345-1272 SUPPORT GP-CONTROL -JOYSTICK, LH
S/N E9S1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
S/N E9S1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 172-8591 M | [10] | NUT-CLIP (M6X1-THD) | |
| 2. | 8X-1386 | [1] | SPACER (12.2X23X22-MM THK) | |
| 3. | 233-3227 | [1] | SUPPORT AS (LH) | |
| 4. | 233-3248 | [2] | BUSHING | |
| 5. | 233-3252 | [1] | SHAFT AS | |
| 6. | 251-2247 | [1] | GROMMET | |
| 7. | 252-1805 Y | [1] | CUSHION GP-ARM | |
| 8. | 252-1807 | [1] | SUPPORT AS (LH) | |
| 3G-0622 | [2] | RING-RETAINING | ||
| 7X-0605 | [2] | WASHER-HARD (13X28X1.6-MM THK) | ||
| 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | ||
| 114-6658 | [2] | WASHER (6.5X17X1-MM THK) | ||
| 294-1001 | [1] | PLATE AS | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 9. | 253-3482 | [1] | KNOB AS (ARMREST ADJUSTMENT) | |
| 10. | 253-3483 | [1] | PLATE AS | |
| 11. | 253-3484 | [2] | WASHER (13X46X3.5-MM THK) | |
| 12. | 272-8329 | [1] | BRACKET AS (LH) | |
| 13. | 292-0617 Y | [1] | ARMREST GP (LH) | |
| 14. | 456-1559 | [1] | ADJUSTER AS | |
| 15. | 345-1275 | [1] | COVER | |
| 16. | 345-1276 | [1] | COVER | |
| 17. | 346-0627 | [1] | BRACKET | |
| 18. | 346-9580 | [1] | FILM-IDENTIFICATION (OPERATOR CONTROLS, LH) | |
| 19. | 114-6658 | [10] | WASHER (6.5X17X1-MM THK) | |
| 20. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 21. | 7J-5925 | [1] | PIN-COTTER | |
| 22. | 7X-0578 | [2] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 23. | 8T-4200 M | [3] | BOLT (M8X1.25X16-MM) | |
| 24. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 8T-4908 M | [7] | BOLT (M8X1.25X25-MM) | |
| 26. | 9X-2043 M | [2] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 27. | 9X-2044 M | [10] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 28. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 29. | 8T-6936 D | SEAL (0.1-M EACH) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00667880709
160-7165: SUSPENSION GP-SEAT
For full view, you need register
Parts for your 14M-3 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-6014 | [1] | HOUSING AS (LOWER) | |
| 2. | 174-2231 Y | [1] | HOUSING GP-SEAT SUSPENSION | |
| 3. | 4V-7884 | [2] | BEARING | |
| 4. | 4V-8577 | [4] | BEARING | |
| 5. | 8Y-5944 | [1] | KIT-SUSPENSION BOOT (SEAT) | |
| (INCLUDES BOOT, RETAINERS & FASTENERS) | ||||
| 6. | 8Y-5965 | [1] | ABSORBER AS-SHOCK | |
| 7. | 8Y-6012 | [1] | ARM AS-SUSPENSION | |
| 8. | 8Y-6024 | [2] | SHAFT AS | |
| 9. | 101-4194 | [1] | KIT-TETHER BELT (SUSPENSION SEAT) | |
| (INCLUDES 2 BELTS) | ||||
| 10. | 101-4195 | [1] | KIT-SUSPENSION ROLLER (SUSPENSION SEAT) | |
| (INCLUDES 4 ROLLERS) | ||||
| 11. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 12. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 13. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 14. | 5V-1497 | [1] | RETAINER | |
| 169-7380 F | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
