AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

468-4972 COVER GP-VALVE MECHANISM NON-BRAKE FOR USE WITH RIGHT HAND FUMES FUMES DISPOSAL AN ATTACHMENT C32


BASIC ENGINE
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP
CYLINDER HEAD GP
DAMPER GP

LOCOMOTIVE ENGINE C32 LOCOMOTIVE ENGINE WJD
 C32 Locomotive Engine WJD00001-UP M0067054 C32 WJD   (2016)

BASIC ENGINE

VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
395-1975 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
456-0738 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
468-4972 COVER GP-VALVE MECHANISM
MECHANISM GP-FUEL PUMP & VALVE
334-2930 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
437-3877 ROCKER ARM GP
ROCKER ARM GP
437-3878 ROCKER ARM GP
 

#M00670540050
 

468-4972: COVER GP-VALVE MECHANISM

468-4972 COVER GP-VALVE MECHANISM
NON-BRAKE
FOR USE WITH RIGHT HAND FUMES FUMES DISPOSAL
AN ATTACHMENT
i06508689 M0067054
4684972 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your C32 LOCOMOTIVE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-3027 [2] BREATHER AS (CRANKCASE)  
2. 4W-3034 [2] CLAMP-HOSE  
3. 126-0559 C [8] BOLT (5/16-18X1.25-IN)  
4. 481-3211 C [2] ELBOW  
5. 491-4030 [3] COVER  
6. 492-1760 C [2] COVER AS  
7. 491-4672 J [1] COVER  
8. 449-9059 [6] SEAL  
9. 033-6031 [2] SEAL-O-RING  
10. 224-9907 [5] STUD (5/16-18-THD)  
11. 4P-8525 [36] SPACER (9X16X30-MM THK)  
12. 061-9457 [2] SEAL-O-RING  
13. 7X-0440 [31] BOLT (5/16-18X1.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  J   448-3693 COVER UTILIZED AS SERVICE REPAIR FOR COVER ASSEMBLY
 

#M00670540051
 

224-3250: CRANKSHAFT GP

224-3250 CRANKSHAFT GP
i02169749 M0067054
2243250 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your C32 LOCOMOTIVE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 253-1752 J [2] PLATE-THRUST  
2. 319-7401 Y [1] SEAL GP-CRANKSHAFT (FRONT)  
3. 317-8766 J [7] BEARING-MAIN (STANDARD)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
4. 384-9908 [1] CRANKSHAFT AS  
4A. 223-9135 [1] GEAR-CRANKSHAFT (99-TEETH)  
4B. 7S-5005 [1] DOWEL  
4C. 4N-0684 [1] DOWEL  
   
    AVAILABLE REPAIR KIT(S):
  243-6718 AJ KIT-CRANKSHAFT BEARING (STANDARD)  
    (INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#M00670540052
 

348-9904: CYLINDER BLOCK AS

348-9904 CYLINDER BLOCK AS
PART OF 348-9906 CYLINDER BLOCK AS
i03745300 M0067054
3489904 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your C32 LOCOMOTIVE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
2. 225-5966 [1] SLEEVE  
3. 232-7607 [7] CAP-CRANKSHAFT  
4. 365-4307 [14] BOLT-12 POINT HEAD (M11X1.25X50-MM)  
5. 341-0087 [2] PLUG AS  
    (EACH INCLUDES)
  6V-6609 [1] SEAL-O-RING  
  9S-4185 [1] PLUG (3/4-16-THD)  
6. 4N-0685 [1] BUSHING (1-IN WIDE)  
7. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
9. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
 

#M00670540053
 

348-9906: CYLINDER BLOCK AS

348-9906 CYLINDER BLOCK AS
PART OF 349-2859 CYLINDER BLOCK GP
i03745298 M0067054
3489906 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your C32 LOCOMOTIVE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-5854 [12] BAND-FILLER (130.2-MM ID)  
2. 155-0809 [12] SEAL-LINER  
3. 155-0810 [12] SEAL-LINER  
4. 155-2793 [12] SEAL-LINER  
5. 556-0701 [12] LINER-CYLINDER  
6. 348-9904 Y [1] CYLINDER BLOCK AS  
  Y   SEPARATE ILLUSTRATION
 

#M00670540054
 

349-2859: CYLINDER BLOCK GP

349-2859 CYLINDER BLOCK GP
i03796150 M0067054
3492859 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your C32 LOCOMOTIVE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 354-8484 [2] GASKET-PLATE  
2. 240-9543 [14] WASHER (12.45X22.35X1.82-MM THK)  
3. 5P-8356 [4] SEAL-O-RING  
4. 4N-1650 [4] DOWEL  
5. 315-9859 [2] PLUG AS  
    (EACH INCLUDES)
  9S-8008 [1] PLUG (1-1/16-12-THD)  
  238-5082 [1] SEAL-O-RING  
6. 225-3100 [2] PLATE-SPACER  
7. 7C-9614 [4] PLUG-TAPERLOCK (1-5/8-12-THD)  
8. 4N-0683 [4] DOWEL  
9. 214-1728 [1] STUD (3/8-16, 1/8-27X3.5-IN)  
10. 6L-4428 [3] STUD-TAPERLOCK (3/8-16X4.01-IN)  
11. 8T-6757 [1] PLUG-PIPE  
12. 348-9906 Y [1] CYLINDER BLOCK AS  
13. 307-2671 [1] PLUG AS  
  9S-8002 [1] PLUG (7/16-20-THD)  
  214-7566 [1] SEAL-O-RING  
14. 3B-0645 [1] PLUG-CUP (32.08-MM OD)  
   
  6I-4361 ABFN INSERT-LINER SEAT (0.772-MM THK)  
  9Y-3368 ABFN INSERT-LINER SEAT (0.822-MM THK)  
  6I-4362 ABFN INSERT-LINER SEAT (0.872-MM THK)  
  6I-4363 ABFN INSERT-LINER SEAT (1.555-MM THK)  
  2W-3815 ABFN INSERT-LINER SEAT (1.605-MM THK)  
  6I-4364 ABFN INSERT-LINER SEAT (1.655-MM THK)  
  6I-4365 ABFN INSERT-LINER SEAT (2.66-MM THK)  
  5N-0093 ABFN INSERT-LINER SEAT (2.71-MM THK)  
  6I-4366 ABFN INSERT-LINER SEAT (2.76-MM THK)  
  101-0524 ABFN INSERT-LINER SEAT (5.16-MM THK)  
  101-0523 ABFN INSERT-LINER SEAT (5.21-MM THK)  
  101-0525 ABFN INSERT-LINER SEAT (5.26-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  N   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SISWEB
  Y   SEPARATE ILLUSTRATION
 

#M00670540055
 

357-7398: CYLINDER HEAD AS

357-7398 CYLINDER HEAD AS
PART OF 359-0936 CYLINDER HEAD GP
i04006393 M0067054
3577398 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your C32 LOCOMOTIVE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-7375 [24] GUIDE-VALVE (STANDARD)  
  122-0447 AB GUIDE-VALVE (0.51-MM OS)  
  122-8612 AB GUIDE-VALVE (0.13-MM OS)  
2. 216-5582 [7] BUSHING (STANDARD)  
  217-0751 AB BUSHING (0.25-MM OS)  
  217-0752 AB BUSHING (0.762-MM OS)  
  261-3429 AB BUSHING (1.778-MM OS)  
  261-3430 AB BUSHING (1.27-MM OS)  
  390-0914 AB BUSHING  
3. 263-4920 [6] SLEEVE-INJECTOR (INLET)  
4. 224-3983 [12] INSERT-SEAT (INLET)(STANDARD)  
  314-3063 AB INSERT-VALVE SEAT (0.55-MM THK)(INLET)  
  314-3064 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  314-3065 AB INSERT-VALVE SEAT (0.13-MM OS)(INLET)  
  314-3066 AB INSERT-VALVE SEAT (0.26-MM OS, INLET)  
  314-3067 AB INSERT-VALVE SEAT (0.26-MM OS)(INLET)  
  314-3068 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  314-3069 AB INSERT-VALVE SEAT (0.51-MM OS)(INLET)  
5. 166-2904 [12] SEAL-O-RING  
6. 3B-0623 [36] PLUG-CUP  
7. 3B-0645 [2] PLUG-CUP (32.08-MM OD)  
8. 8T-6757 [3] PLUG-PIPE  
9. 9X-7430 [6] SEAL-O-RING  
10. 226-5561 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  288-4883 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#M00670540056
 

284-8891: CYLINDER HEAD GP

284-8891 CYLINDER HEAD GP
i02495389 M0067054
2848891 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your C32 LOCOMOTIVE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 359-1439 [48] SEAL AS-WATER  
2. 6I-4025 [32] FASTENER GP-CYLINDER HEAD (MARKED Y)  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
3. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
4. 106-5673 [20] FASTENER GP-CYLINDER HEAD (MARKED X)  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  124-1854 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
5. 225-3099 [2] GASKET-CYLINDER HEAD  
6. 248-0036 [26] BOLT-WASHER HEAD (3/8-16X6-IN)  
7. 359-0936 Y [2] CYLINDER HEAD GP  
8. 183-3407 [10] PLUG AS  
    (EACH INCLUDES)
8A. 214-7568 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#M00670540057
 

359-0936: CYLINDER HEAD GP

359-0936 CYLINDER HEAD GP
PART OF 284-8891 CYLINDER HEAD GP
i04006214 M0067054
3590936 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your C32 LOCOMOTIVE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [48] LOCK-RETAINER  
2. 6I-0928 [24] WASHER-SPECIAL  
3. 490-7199 [12] VALVE-INLET  
4. 490-7200 [12] VALVE-EXHAUST  
5. 211-3122 [24] SPRING-VALVE (INNER)  
6. 247-9908 [24] SPRING-VALVE (OUTER)  
7. 357-7398 Y [1] CYLINDER HEAD AS  
8. 163-2478 [24] SEAL-VALVE STEM  
9. 186-2001 [24] ROTOCOIL AS  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#M00670540058
 

344-5129: DAMPER & PULLEY GP

344-5129 DAMPER & PULLEY GP
FOR USE WITH 8 RIB POLYOVEE ACCESSORY DRIVES AND V-BELT FAN DRIVES
AN ATTACHMENT
i04036764 M0067054
3445129 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your C32 LOCOMOTIVE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-6037 [1] ADAPTER-DAMPER  
2. 6N-7654 [1] SPACER (6.312X8.18X0.312-IN THK)  
3. 167-8130 [2] DAMPER AS  
4. 343-4609 [1] PULLEY-CRANKSHAFT (8-GROOVE)  
5. 355-3671 [1] PULLEY (4-GROOVE)  
6. 0S-1573 [12] BOLT (1/2-13X4-IN)  
7. 0S-1587 [8] BOLT (1/2-13X1.75-IN)  
8. 253-2180 [8] BOLT-SOCKET HEAD  
9. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#M00670540059
 

361-0069: DAMPER & PULLEY GP

361-0069 DAMPER & PULLEY GP
PROVIDES A SINGLE FINNED VISCOUS DAMPER, ADAPTER, POLY-VEE CRANKSHAFT PULLEY, AND HARDWARE
AN ATTACHMENT
i04324257 M0067054
3610069 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your C32 LOCOMOTIVE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-6037 [1] ADAPTER-DAMPER  
2. 6N-7654 [1] SPACER (6.312X8.18X0.312-IN THK)  
3. 213-3199 [1] DAMPER AS  
4. 343-4609 [1] PULLEY-CRANKSHAFT (8-GROOVE)  
5. 1B-2886 [12] BOLT (1/2-13X3.75-IN)  
6. 253-2180 [8] BOLT-SOCKET HEAD  
 

Information:

Operation and Maintenance Manual
Engine Valve Rotators - Inspect
C32 Locomotive Engine
Engine Valve Lash - Check
C32 Locomotive Engine
Specifications
Electronic Unit Injector Rocker Arm
C27 and C32 Industrial and Petroleum Engines
Electronic Unit Injector Rocker Arm
C27 and C32 Industrial and Petroleum Engines
Valve Mechanism
C27 and C32 Industrial and Petroleum Engines
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C27 and C32 Industrial and Petroleum Engines
Finding Top Center Position for No. 1 Piston
C27 and C32 Industrial and Petroleum Engines
Troubleshooting
Excessive Valve Lash
C27 and C32 Industrial and Petroleum Engines
Disassembly and Assembly
Rocker Arm - Disassemble
C27 and C32 Industrial Engines
Rocker Arm - Assemble
C27 and C32 Industrial Engines
Valve Mechanism Cover Base - Remove and Install
C27 and C32 Industrial Engines
Rocker Arm and Shaft - Remove
C27 and C32 Industrial Engines
Rocker Arm and Shaft - Install
C27 and C32 Industrial Engines
Valve Actuator (Variable) - Remove
C27 and C32 Industrial Engines
Valve Actuator (Variable) - Install
C27 and C32 Industrial Engines
Valve Mechanism Cover - Remove and Install
C27 and C32 Industrial Engines

Caterpillar Parts SIS Catalog C32 :

COVER GP-VALVE MECHANISM
456-0738 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
395-1975 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
348-5782 COVER GP-VALVE MECHANISM
COVER GP-REAR HOUSING
270-8664 COVER GP-REAR HOUSING
COVER GP-REAR HOUSING
270-8580 COVER GP-REAR HOUSING
COVER GP-OIL PAN
9Y-9828 COVER GP-OIL PAN
COVER GP-OIL PAN
9Y-9827 COVER GP-OIL PAN
COVER GP-OIL PAN
361-4465 COVER GP-OIL PAN
CRANKSHAFT GP
224-3250 CRANKSHAFT GP
CYLINDER BLOCK AS
348-9904 CYLINDER BLOCK AS
CYLINDER BLOCK AS
348-9906 CYLINDER BLOCK AS
CYLINDER BLOCK GP
349-2859 CYLINDER BLOCK GP
CYLINDER HEAD AS
357-7398 CYLINDER HEAD AS
CYLINDER HEAD GP
284-8891 CYLINDER HEAD GP
CYLINDER HEAD GP
359-0936 CYLINDER HEAD GP
DAMPER & PULLEY GP
344-5129 DAMPER & PULLEY GP

Truck sale:

Caterpillar C32
 
Caterpillar C32
- Stationary Generator Sets
RING POWER CORP.
Caterpillar C32
 
Caterpillar C32
- Stationary Generator Sets
RING POWER CORP.
Caterpillar C32IN, Industriemaschinen, Bau-Und Bergbauausrüstung
155.000 
Caterpillar C32IN, Industriemaschinen, Bau-Und Bergbauausrüstung
- Industrial engines
FOLEY EQUIPMENT COMPANY
Caterpillar C32, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
300.000 
Caterpillar C32, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
89.645 
Caterpillar C32 PGAG, transportable stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.