ENGINE ARRANGEMENT
ENGINE ARBASIC ENGINE
CAMSHAFT GPVALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP
CYLINDER HEAD GP
ENGINE ARRANGEMENT
ENGINE AR#M00684460001
485-9942: ENGINE AR-PRIMARY
485-9942 ENGINE AR-PRIMARY
S/N E5G1-UP
120 BRAKE ( 161 BHP) AT 1800 RPM
PART OF 485-7142 GENERAL AR
S/N E5G1-UP
120 BRAKE ( 161 BHP) AT 1800 RPM
PART OF 485-7142 GENERAL AR
For full view, you need register
Parts for your C4.4 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 432-4944 Y | [1] | ALTERNATOR GP-CHARGING | ||
| 433-5258 Y | [1] | FUMES DISPOSAL GP | ||
| 470-6153 Y | [1] | CAMSHAFT GP | ||
| 416-1867 Y | [1] | CONNECTION GP-WATER | ||
| 415-5535 Y | [1] | CONTROL GP-ELECTRONIC | ||
| 418-7659 Y | [1] | COOLER GP-ENGINE OIL | ||
| 415-7105 Y | [1] | COVER GP-VALVE MECHANISM | ||
| 433-6323 Y | [1] | CRANKSHAFT GP | ||
| 415-3299 Y | [1] | CYLINDER BLOCK GP | ||
| 415-5520 Y | [1] | CYLINDER HEAD GP | ||
| 417-4187 Y | [1] | DRAIN GP-ENGINE OIL | ||
| 418-7478 Y | [1] | DRIVE GP-FAN | ||
| 416-9543 Y | [1] | ELBOW GP-AIR INLET | ||
| 420-0291 Y | [1] | EXTENSION GP-FAN | ||
| 418-6475 Y | [1] | FASTENER GP-EXHAUST MANIFOLD | ||
| 418-7536 Y | [1] | FILLER GP-ENGINE OIL | ||
| 416-8716 Y | [1] | FILM GP (ALTERNATOR) | ||
| 476-7895 Y | [1] | FILM GP | ||
| 416-1042 Y | [1] | FILM GP | ||
| 417-3394 Y | [1] | FILTER GP-ENGINE OIL | ||
| 453-7163 Y | [1] | FILTER GP-FUEL | ||
| 556-9708 Y | [1] | FILTER GP-FUEL | ||
| 447-3881 Y | [1] | FLYWHEEL GP | ||
| 441-9155 Y | [1] | GAUGE GP-OIL LEVEL (DIPSTICK) | ||
| 492-2945 Y | [1] | WIRING GP-ENGINE | ||
| 444-9659 Y | [1] | HOUSING GP-FLYWHEEL | ||
| 467-7637 Y | [1] | HOUSING GP-FRONT | ||
| 415-5522 Y | [1] | INJECTOR GP-FUEL | ||
| 415-7948 Y | [1] | JET GP-PISTON COOLING | ||
| 417-3458 Y | [1] | LIFTING GP-ENGINE | ||
| 415-7119 Y | [1] | LINES GP-FUEL | ||
| 416-9552 Y | [1] | MANIFOLD GP-EXHAUST | ||
| 415-7949 Y | [1] | MOUNTING GP-CONTROL | ||
| 423-1280 Y | [1] | PAN GP-OIL | ||
| 500-6281 Y | [1] | PISTON & ROD GP | ||
| 426-3228 Y | [1] | PLUG GP-DIRECT AIR START | ||
| 417-4190 Y | [1] | PLUG GP-OIL FILTER MOUNTING | ||
| 417-4286 Y | [1] | PLUG GP-ENGINE | ||
| 418-8564 Y | [1] | PLUG GP-ENGINE | ||
| 417-3401 Y | [1] | PLUG GP-FRONT HOUSING | ||
| 467-7586 Y | [1] | PULLEY GP-ALTERNATOR | ||
| 418-7661 Y | [1] | PULLEY GP-CRANKSHAFT | ||
| 416-8723 Y | [1] | PUMP GP-ENGINE OIL | ||
| 415-5523 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 416-1864 Y | [1] | PUMP GP-WATER | ||
| 415-5527 Y | [1] | RAIL GP-FUEL | ||
| 415-7947 Y | [1] | ROCKER ARM GP | ||
| 425-9760 Y | [1] | SENSOR GP-ENGINE | ||
| 430-5204 Y | [1] | SENSOR GP-TEMPERATURE | ||
| 418-7475 Y | [1] | STARTING MOTOR GP-ELECTRIC | ||
| 467-7639 Y | [1] | TURBOCHARGER GP | ||
| 452-7366 | [1] | CYLINDER BLOCK GP-SHORT | ||
| 452-7394 | [1] | CYLINDER HEAD GP (SHORT) | ||
| 482-8594 | [1] | ELECTRONICS GP-ENGINE | ||
| 478-6981 | [1] | PLATE GP-SERIAL NUMBER | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00684460002
485-7142: GENERAL AR
485-7142 GENERAL AR
S/N L4R1-UP
S/N L4R1-UP
For full view, you need register
Parts for your C4.4 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 485-9942 Y | [1] | ENGINE AR-PRIMARY | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00684460003
470-6153: CAMSHAFT GP
For full view, you need register
Parts for your C4.4 GENERATOR SET:
CATERPILLAR SIS#M00684460004
415-7105: COVER GP-VALVE MECHANISM
415-7105 COVER GP-VALVE MECHANISM
S/N E5G1-UP
PART OF 485-9942 ENGINE AR-PRIMARY
S/N E5G1-UP
PART OF 485-9942 ENGINE AR-PRIMARY
For full view, you need register
Parts for your C4.4 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 101-3895 M | [7] | BOLT (M8X1.25X35-MM)(S) | |
| 2. | 103-5705 M | [4] | BOLT (M8X1.25X110-MM) | |
| 3. | 392-9458 | [1] | COVER GP-VALVE MECHANISM | |
| 3A. | 195-9245 M | [3] | SCREW (M4X0.7X10-MM) | |
| 3B. | 380-9615 | [1] | BREATHER (VALVE MECHANISM) | |
| 3C. | 392-9471 | [1] | SEAL | |
| 4. | 392-9472 | [1] | GASKET (VALVE COVER) | |
| 5. | 455-6923 | [1] | COVER-BASE | |
| 6. | 6I-0217 M | [10] | BOLT (M8X1.25X20-MM) | |
| M | METRIC PART | |||
#M00684460005
433-6323: CRANKSHAFT GP
For full view, you need register
Parts for your C4.4 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 032-9090 | [2] | WASHER-THRUST (STANDARD-UPPER)(S) | |
| 2. | 339-8780 | [1] | DOWEL | |
| 3. | 341-4028 | [1] | RING-TIMING | |
| 4. | 475-8373 C | [1] | CRANKSHAFT GP | |
| 4A. | 455-3693 | [1] | CRANKSHAFT | |
| 5. | 216-8314 | [1] | GEAR-CRANKSHAFT (34-TEETH) | |
| 6. | 276-7394 M | [3] | SCREW (M6X1XX12-MM) | |
| 7. | 032-9091 | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 8. | 067-6135 | [1] | KEY-WOODRUFF (CRANKSHAFT) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#M00684460006
433-6323: CRANKSHAFT GP
For full view, you need register
Parts for your C4.4 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | CJ | [2] | PLATE-THRUST (STANDARD) | |
| 2. | 339-8780 | [1] | DOWEL | |
| 3. | 341-4028 | [1] | RING-TIMING | |
| 4. | 475-8373 | [1] | CRANKSHAFT GP | |
| 4A. | 455-3693 | [1] | CRANKSHAFT | |
| 5. | 216-8314 | [1] | GEAR-CRANKSHAFT (34-TEETH) | |
| 6. | 276-7394 M | [3] | SCREW (M6X1XX12-MM) | |
| 7. | CJ | [2] | PLATE-THRUST (STANDARD) | |
| 8. | 067-6135 | [1] | KEY-WOODRUFF (CRANKSHAFT) | |
| CFP | [1] | BEARING (STANDARD-UPPER) | ||
| CFP | [5] | BEARING (STANDARD-LOWER) | ||
| CF | [4] | BEARING (STANDARD-UPPER) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 518-5437 BP | [1] | KIT-BEARING | ||
| (INCLUDES BEARINGS) | ||||
| 518-5440 AB | KIT-BEARING (0.254-MM US) | |||
| 518-5441 AB | KIT-BEARING (0.508-MM US) | |||
| 518-5885 AB | KIT-BEARING (0.762-MM US) | |||
| (EACH BEARING KIT INCLUDES BEARINGS) | ||||
| 518-5891 J | [1] | KIT-WASHER (STANDARD) | ||
| (INCLUDES WASHERS) | ||||
| 518-5892 AB | KIT-WASHER (0.191-MM US) | |||
| 518-5893 AB | KIT-WASHER (STANDARD, 0.191-MM US) | |||
| (EACH WASHER KIT INCLUDES WASHERS) | ||||
| 360-3986 AB | KIT-BEARING (CONNECTING ROD) | |||
| 468-7762 AB | KIT-BEARING (0.254-MM US) | |||
| 468-7769 AB | KIT-BEARING (0.508-MM US) | |||
| 468-7770 AB | KIT-BEARING (0.762-MM US) | |||
| (EACH BEARING KIT INCLUDES BEARINGS) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| P | KIT MARKED P SERVICES PART(S) MARKED P | |||
#M00684460007
415-3299: CYLINDER BLOCK GP
For full view, you need register
Parts for your C4.4 GENERATOR SET:
CATERPILLAR SIS#M00684460008
451-7736: CYLINDER BLOCK GP
For full view, you need register
Parts for your C4.4 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 035-8068 | [10] | BOLT (5/8-18X3.75-IN) | |
| 2. | 067-6006 | [1] | PLUG (CYLINDER BLOCK) | |
| 3. | 067-6043 | [1] | PLUG-SIDE | |
| 4. | 185-0884 | [2] | DOWEL | |
| 5. | 225-8858 | [2] | PLUG | |
| 6. | 232-7596 | [1] | PLUG | |
| 7. | 232-7597 | [2] | PLUG | |
| 8. | 232-7599 | [1] | PLUG | |
| 9. | 366-8853 | [1] | BEARING | |
| 10. | 067-6002 | [10] | DOWEL | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#M00684460009
397-1559: CYLINDER HEAD AS
For full view, you need register
Information:
ENGINE ARRANGEMENT
ENGINE AR
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
