AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

424-8375 HARNESS AS-ENGINE S/N K3B606-UP; X3F1-UP PART OF 424-8374 WIRING GP-CONTROL ALSO AN ATTACHMENT C13 XQ375


ELECTRICAL AND STARTING SYSTEM
HARNESS GP

GENERATOR SET C13 XQ375 GENERATOR SET X3F
 XQ425 Generator Set X3F00001-UP POWERED BY C13 M0068474 C13 XQ375 X3F   (2014)

ELECTRICAL AND STARTING SYSTEM

HARNESS GP
HARNESS AS-ENGINE
418-2031 HARNESS AS-ENGINE
418-2032 HARNESS AS-ENGINE
424-8375 HARNESS AS-ENGINE
426-3718 HARNESS AS-ENGINE
HARNESS AS-ENGINE
426-3719 HARNESS AS-ENGINE
432-6818 HARNESS AS-ENGINE
 

#M00684740320
 

424-8375: HARNESS AS-ENGINE

424-8375 HARNESS AS-ENGINE
S/N K3B606-UP; X3F1-UP
PART OF 424-8374 WIRING GP-CONTROL
ALSO AN ATTACHMENT
i05391550 M0068474
  For full view, you need register

Parts for your C13 XQ375 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  237-0336 [2] COVER (CONNECTOR)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2256 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  9X-3401 [54] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [54] PIN-CONNECTOR (14-GA TO 16-GA)  
  160-8124 [1] PLUG AS (2-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  160-7689 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
  175-3360 [1] PLUG AS-CONNECTOR  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  264-5732 [1] PLUG AS-CONNECTOR (120-PIN)  
  288-7324 [1] SEAL-CONNECTOR  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  240-7874 [5] PLUG AS-CONNECTOR (2-PIN)  
  240-7877 [1] PLUG AS-CONNECTOR (2-PIN)  
  281-3115 [1] PLUG AS-CONNECTOR (2-PIN)  
    (EACH PLUG AS INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  240-7878 [2] PLUG AS-CONNECTOR (3-PIN)  
  240-7879 [1] PLUG AS-CONNECTOR (3-PIN)  
  281-3119 [1] PLUG AS-CONNECTOR (3-PIN)  
  281-3120 [2] PLUG AS-CONNECTOR (3-PIN)  
    (EACH PLUG AS INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
  281-3395 [1] PLUG AS-CONNECTOR (12-PIN)  
  264-7034 [1] SEAL-CONNECTOR  
  8T-8737 [132] PLUG-SEAL  
  269-4005 [1] RECEPTACLE AS-CONNECTOR  
  8T-8737 [3] PLUG-SEAL  
  230-4014 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  214-4208 [1] RECEPTACLE AS-CONNECTOR (70-PIN)  
  240-7193 [1] RESISTOR AS (500-OHM, 2-WATT)  
  134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  289-5151 E SLEEVE (12-CM)  
  307-2338 E SLEEVE (5-CM)  
  9X-3402 [180] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [180] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  1S-9593 [6] STRAP-CABLE  
  3S-2093 [4] STRAP-CABLE  
  189-3158 [1] SUPPRESSOR-ARC  
  329-3734 B TAPE-ELECTRICAL  
  1P-0810 B TAPE-ELECTRICAL  
  7N-9017 [1] TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(85-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#M00684740321
 

426-3718: HARNESS AS-ENGINE

426-3718 HARNESS AS-ENGINE
S/N K3B606-UP
PART OF 426-3719 HARNESS AS-ENGINE
ALSO AN ATTACHMENT
i05447380 M0068474
  For full view, you need register

Parts for your C13 XQ375 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3E-6446 [1] CAP AS-CONNECTOR  
  9X-3401 [33] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [33] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2256 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUD AS, WEDGE & INTERFACE SEAL)
  230-4009 [1] PLUG AS-CONNECTOR (12-PIN)  
  264-7034 [1] SEAL-CONNECTOR  
  230-4011 [4] PLUG AS-CONNECTOR (2-PIN)  
  238-8247 [1] PLUG AS-CONNECTOR (2-PIN)  
  281-8801 [1] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  230-4013 [1] PLUG AS-CONNECTOR (3-PIN)  
  237-0227 [1] PLUG AS-CONNECTOR (3-PIN)  
  281-8803 [1] PLUG AS-CONNECTOR (3-PIN)  
  281-8804 [2] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
  264-5732 [1] PLUG AS-CONNECTOR (120-PIN)  
  288-7324 [1] SEAL-CONNECTOR  
  160-8124 [1] PLUG AS (2-PIN)  
  8T-8737 [2] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [57] PLUG-SEAL  
  134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  324-6267 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  9X-3402 [138] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [138] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  344-1687 [3] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  1S-9593 [6] STRAP-CABLE  
  3S-2093 [2] STRAP-CABLE  
  1P-0810 B TAPE-ELECTRICAL  
  329-3734 B TAPE-ELECTRICAL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(60-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#M00684740322
 

426-3719: HARNESS AS-ENGINE

426-3719 HARNESS AS-ENGINE
S/N K3B606-UP
PART OF 362-1381 WIRING GP-ELECTRONIC CONTROL
ALSO AN ATTACHMENT
i05435907 M0068474
4263719 HARNESS AS-ENGINE Parts scheme
  For full view, you need register

Parts for your C13 XQ375 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] HARNESS AS-ENGINE  
2. 3S-2093 [1] STRAP-CABLE  
3. 6K-0806 [1] STRAP-CABLE  
4. 7K-1181 [2] STRAP-CABLE  
5. [2] BRACKET AS  
    (EACH INCLUDES)
  140-1823 [1] SPACER (11X19.05X10.5-MM THK)  
6. [1] BRACKET AS  
  144-8344 [1] SPACER (11X19X20-MM THK)  
7. 344-2466 [1] COVER AS  
  Y   SEPARATE ILLUSTRATION
 

#M00684740323
 

432-6818: HARNESS AS-ENGINE

432-6818 HARNESS AS-ENGINE
S/N K3B606-UP
PART OF 388-3098 CONTROL & MTG GP-ENGINE ELEK
ALSO AN ATTACHMENT
i05393231 M0068474
  For full view, you need register

Parts for your C13 XQ375 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  Y [1] HARNESS AS-CEM  
  285-6395 [2] CLIP (LADDER)  
  Y   SEPARATE ILLUSTRATION
 

#M00684740324
 

442-2356: HARNESS AS-ENGINE

442-2356 HARNESS AS-ENGINE
S/N X3F1-UP
PART OF 442-2357 WIRING GP-ENGINE
AN ATTACHMENT
i05651555 M0068474
  For full view, you need register

Parts for your C13 XQ375 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  5F-1265 [1] CONNECTOR  
  5P-6001 D TUBE-HEAT SHRINK (4.75-MM DIA)(0.8-M)  
  8T-8737 [93] PLUG-SEAL  
  9G-3695 [2] PLUG-SEAL  
  9X-1056 [8] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  9X-4391 [1] PLUG AS-CONNECTOR (70-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8557 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-5615 [2] SEAL (INTERFACE, 70-PIN)  
  109-3038 [2] END-WIRE (16-GA)  
  109-3039 [2] END-WIRE (12-GA)  
  112-7497 [4] END-WIRE (14-GA)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [120] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  7T-0094 [2] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(50-CM)  
  2L-8051 [4] TERMINAL-RING (6-GA, 5/16-IN SCREW)  
    -OR-
  5P-3455 [4] TERMINAL-RING (8-GA, 5/16-IN SCREW)  
  2L-8052 [3] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [3] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
  2L-8067 [1] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  131-1497 [3] TERMINAL AS-RING (10-GA TO 12-GA)  
    (EACH INCLUDES)
  2L-8068 [1] TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)  
  2L-8069 [3] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8071 [3] TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)  
  2L-8078 [1] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
  2L-8079 [2] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  2L-8081 [1] TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)  
  131-3201 [1] BOOT  
  133-0970 [2] RECEPTACLE AS-CONNECTOR (TEE)  
  135-2543 [2] BOOT (RED)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [6] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2256 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  155-2260 [5] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS, WEDGES, & INTERFACE SEAL)
  177-9656 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  160-7689 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
  174-3016 [2] PLUG AS-CONNECTOR (3-PIN)  
  214-7404 [1] CONNECTOR (12-PIN)  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  455-0704 [1] SEAL-CONNECTOR  
  234-1857 [1] PLUG-CONNECTOR (9-PIN)  
  244-0452 [3] END-WIRE (14-GA TO 20-GA)  
  246-7014 [1] SEAL (9-POSITION)  
  247-8195 [1] PLUG AS  
  [1] WEDGE  
  360-3747 [1] BOOT  
  374-7464 [1] CAP-SEAL  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#M00684740325
 

449-0055: HARNESS AS-ENGINE

449-0055 HARNESS AS-ENGINE
S/N X3F1-UP
PART OF 449-1347 WIRING GP-SENSOR
AN ATTACHMENT
i05775619 M0068474
  For full view, you need register

Parts for your C13 XQ375 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUS AS, WEDGE, & INTERFACE SEAL)
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  230-4014 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  9X-3402 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [3] SOCKET-CONNECTOR (14-GA TO 16-GA)  
 

#M00684740326
 

444-1349: HARNESS AS-LIGHTING

444-1349 HARNESS AS-LIGHTING
S/N X3F1-UP
PART OF 444-4274 WIRING GP-LIGHTING
AN ATTACHMENT
i05651559 M0068474
  For full view, you need register

Parts for your C13 XQ375 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  155-2270 [24] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [24] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM)  
  E   ORDER BY THE CENTIMETER
 

#M00684740327
 

348-2881: HARNESS AS-PANEL

348-2881 HARNESS AS-PANEL
S/N X3F1-UP
PART OF 393-4949 PANEL GP-CONTROL
AN ATTACHMENT
i04860169 M0068474
  For full view, you need register

Parts for your C13 XQ375 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  102-8802 [12] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5P-6006 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)  
  8L-8413 [13] STRAP-CABLE (WHITE)  
  109-3038 [2] END-WIRE (16-GA)  
  5P-1475 [6] TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  194-5226 [12] WIRE AS (16-GA)  
    -OR-
  194-5227 [12] WIRE AS (14-GA)  
  D   ORDER BY THE METER
 

#M00684740328
 

348-2882: HARNESS AS-PANEL

348-2882 HARNESS AS-PANEL
S/N X3F1-UP
PART OF 393-4949 PANEL GP-CONTROL
AN ATTACHMENT
i04860176 M0068474
  For full view, you need register

Parts for your C13 XQ375 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  8L-8413 [26] STRAP-CABLE (WHITE)  
  9G-3695 [10] PLUG-SEAL  
  109-3038 [2] END-WIRE (16-GA)  
  2L-8076 [11] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  2L-8079 [9] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  194-5226 [27] WIRE AS (16-GA)  
    -OR-
  194-5227 [27] WIRE AS (14-GA)  
  M   METRIC PART
 

#M00684740329
 

433-3979: HARNESS AS-PANEL

433-3979 HARNESS AS-PANEL
S/N X3F1-UP
PART OF 431-9821 PANEL GP-CONTROL
AN ATTACHMENT
i05660664 M0068474
  For full view, you need register

Parts for your C13 XQ375 GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-8799 [1] BOOT (RED)  
  126-1774 [1] COVER-CONNECTOR  
  109-3038 [70] END-WIRE (16-GA)  
  110-8714 [4] END-WIRE (18-GA)  
  112-7497 [4] END-WIRE (14-GA)  
  113-8961 [1] END-WIRE (10-GA)  
  120-4510 [2] END-WIRE (14-GA)  
  155-2260 [11] KIT-CONNECTING PLUG (3-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  174-0503 [3] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  194-4254 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [56] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [56] PIN-CONNECTOR (14-GA TO 16-GA)  
  160-7689 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
  174-3016 [1] PLUG AS-CONNECTOR (3-PIN)  
  8T-8737 [95] PLUG-SEAL  
  9X-0145 [1] RECEPTACLE AS-CONNECTOR (24-PIN)  
  320-9861 [1] GASKET  
  103-0213 [1] RECEPTACLE AS-CONNECTOR (70-PIN)  
  133-0970 [3] RECEPTACLE AS-CONNECTOR (TEE)  
  9W-1951 [1] RECEPTACLE-CONNECTOR (9-PIN)  
  8T-8730 [43] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [38] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [38] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  3S-2093 B [53] STRAP-CABLE  
  9X-6772 [2] STRAP-CABLE  
  5P-5618 [2] TERMINAL-BLADE (10-GA TO 12-GA)  
  5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
  097-7234 [3] TERMINAL-BLADE (18-GA TO 22-GA)  
  2L-8065 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)  
  2L-8067 [1] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  2L-8069 [3] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  5P-6001 D TUBE-HEAT SHRINK (4.75-MM DIA)(1.2-M)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(80-CM)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

Information:

Special Instruction
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}

Caterpillar Parts SIS Catalog C13 XQ375 :

418-2032 HARNESS AS-ENGINE
HARNESS AS-ENGINE
418-2031 HARNESS AS-ENGINE
385-9144 HARNESS AS-ENGINE
385-4841 HARNESS AS-ENGINE
396-3862 HARNESS AS-CONTROL
439-8137 HARNESS AS-CEM
HARNESS AS-CEM
439-8136 HARNESS AS-CEM
432-6819 HARNESS AS-CEM
426-3718 HARNESS AS-ENGINE
HARNESS AS-ENGINE
426-3719 HARNESS AS-ENGINE
432-6818 HARNESS AS-ENGINE
442-2356 HARNESS AS-ENGINE
449-0055 HARNESS AS-ENGINE
444-1349 HARNESS AS-LIGHTING
348-2881 HARNESS AS-PANEL
348-2882 HARNESS AS-PANEL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.