GENERATORS
GENERATOR GPGENERATORS
GENERATOR GP
#M00686280560
296-0644: FASTENER GP-GENERATOR
296-0644 FASTENER GP-GENERATOR
S/N E2P1-UP; E2S1-UP; E2X1-UP
FOR USE WITH 1400-FRAME
AN ATTACHMENT
S/N E2P1-UP; E2S1-UP; E2X1-UP
FOR USE WITH 1400-FRAME
AN ATTACHMENT
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 137-8533 B | [4] | SHIM PACK (INCLUDES 13-SHIMS) | |
| 2. | 260-0217 | [4] | SETSCREW (M24X2-THD) | |
| 3. | 6V-8190 | [4] | NUT (1-8-THD) | |
| 4. | 7X-0412 | [4] | BOLT (1-8X4.75-IN) | |
| 5. | 8T-4122 | [12] | WASHER-HARD (17X32X3.5-MM THK) | |
| 6. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 8T-5361 | [8] | WASHER-HARD (28X49X5-MM THK) | |
| 8. | 7X-0325 | [16] | BOLT (1/2-13X2.5-IN) | |
| 9. | 8T-9393 | [12] | BOLT (5/8-11X1.5-IN) | |
| B | USE AS REQUIRED | |||
#M00686280561
252-3756: GENERATOR AR
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3755 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00686280562
252-3758: GENERATOR AR
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3757 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00686280563
252-3760: GENERATOR AR
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3759 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00686280564
252-3762: GENERATOR AR
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3761 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [3] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [1] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00686280565
252-3772: GENERATOR AR
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3771 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 7W-5893 | [4] | FILM-INFORMATION (GENERATOR LIFTING) | ||
| INSTALL ONE DIRECTLY ABOVE EACH LIFTING HOLDE ON GENERATOR BARREL. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [1] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [3] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00686280566
252-3774: GENERATOR AR
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3773 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 7W-5893 | [4] | FILM-INFORMATION (GENERATOR LIFTING) | ||
| INSTALL ONE DIRECTLY ABOVE EACH LIFTING HOLDE ON GENERATOR BARREL. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [1] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [3] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00686280567
252-3776: GENERATOR AR
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3775 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 7W-5893 | [4] | FILM-INFORMATION (GENERATOR LIFTING) | ||
| INSTALL ONE DIRECTLY ABOVE EACH LIFTING HOLDE ON GENERATOR BARREL. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [1] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [3] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00686280568
252-3778: GENERATOR AR
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3777 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 7W-5893 | [4] | FILM-INFORMATION (GENERATOR LIFTING) | ||
| INSTALL ONE DIRECTLY ABOVE EACH LIFTING HOLDE ON GENERATOR BARREL. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [1] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [3] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#M00686280569
252-3788: GENERATOR AR
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 252-3787 Y | [1] | GENERATOR GP | ||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 7W-5893 | [4] | FILM-INFORMATION (GENERATOR LIFTING) | ||
| INSTALL ONE DIRECTLY ABOVE EACH LIFTING HOLDE ON GENERATOR BARREL. | ||||
| 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 303-3433 | [1] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER. | ||||
| ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 225-3224 | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX, DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [3] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING. | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog G3512 :
Truck sale:
124,000 USD
