SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSSHIPPING GP
CHARTS & FILMS
GASKET & SEAL KITS
PM (PREVENTIVE MAINTENANCE) KITS
KIT-REBUILD
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS
#M00686320760
6L-4502: CHART-PLATE & FILM
6L-4502 CHART-PLATE & FILM
S/N E2N1-UP; E2T1-UP
S/N E2N1-UP; E2T1-UP
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| [1] | FILM-IDENTIFICATION (CERTIFICATION) | |||
| CONTACT YOUR LOCAL DEALER. | ||||
| INSTALL FILM VERTICALLY ON THE RH REAR VALVE COVER, READABLE FROM THE FRONT OF THE ENGINE. IF THAT VALVE COVER IS NOT AVAILABLE, MOVE FILM FORWARD TO THE NEXT AVAILABLE VALVE COVER. | ||||
| 460-0815 | [1] | FILM GP (BAR CODE) | ||
| INSTALL FILM VERTICALLY ON THE FIRST AVAILABLE VALVE COVER FROM THE RH REAR OF THE ENGINE, READABLE FORM THE FRONT OF THE ENGINE. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 250-3444 | [1] | FILM-INFORMATION (STANDARD ROTATION) | ||
| INSTALL FILM ON THE LH CAM GEAR COVER IN A VISIBLE LOCATION. IF THAT COVER IS NOT AVAILABLE, MOVE TO THE RH CAM GEAR COVER. | ||||
| 308-4479 | [1] | FILM-WARNING (NO WELD, READ OMM) | ||
| INSTALL FILM CENTERED AT THE BOTTOM OF THE ECM CONTROL BOX. | ||||
| 421-1046 | [1] | FILM-WARNING (EMERGENCY STOP) | ||
| INSTALL FILM DIRECTLY BELOW THE E-STOP BUTTON ON THE FACE OF THE ECM CONTROL BOX. | ||||
| 424-6100 | [1] | FILM-WARNING (ELECTROCUTION HAZARD, READ OMM) | ||
| INSTALL FILM ON THE FACE OF THE ECM CONTROL BOX IN THE BOTTOM RH CORNER OF THE BOX. | ||||
| 224-9830 | [2] | FILM-WARNING (SHOCK HAZARD) | ||
| INSTALL FILMS ON CYL #7 & 38 ROCKER BASES. IF THESE BASES ARE NOT VISIBLE, MOVE FILM TO THE FIRST VISIBLE ROCKER BASE. | ||||
| 225-3226 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL FILM ON CYL #11 & #12 ROCKER BASES. IF THESE BASES ARE NOT AVAILABLE, MOVE FILM FORWARD OT THE FIRST VISIBLE ROCKER BASE FROM THE SIDE OF THE ENGINE. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON THE RH SIDE ON THE OIL COOLER, ABOVE THE DIPSTICK, AND ONE FILM ON THE LH SIDE OF THE ENGINE ON THE CRANKCASE COVER NEAR THE MIDLINE OF THE ENGINE. BOTH FILMS SHOULD BE VISIBLE FROM THE SIDE OF THE ENGINE. | ||||
| 228-3369 | [2] | FILM-WARNING (DO NOT OPERATE, READ OMM) | ||
| INSTALL ONE FILM ON THE FIRST AVAILABLE ROCKER BASE ON EACH SIDE OF THE ENGINE, NEAREST THE CENTERLINE OF THE ENGINE. | ||||
| 115-5852 | [1] | PLATE & FILM GP (ENGINE INFORMATION) | ||
| CONTACT YOUR LOCAL DEALER. | ||||
| INSTALL FILM ON THE LH, FRONT, LOWER HEAD FACE OF THE BLOCK BETWEEN CYL #2 AND THE FRONT HOUSING. READABLE FROM THE REAR OF ENGINE. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 298-5631 | [2] | PLATE-IDENTIFICATION (CAT) | ||
| INSTALL ONE ON RH REAR CAM COVER AND ONE ON THE LH FRONT CAM COVER IF VISIBLE. | ||||
| IF EITHER PRIMARY LOCATION IS NOT VISIBLE, INSTALL PLATE ON THE NEXT VISIBLE CAM COVER LOCATION ON THAT SIDE OF THE ENGINE. | ||||
| 3N-3790 | [1] | PLATE-SERIAL NUMBER (ENGINE) | ||
| CONTACT YOUR LOCAL DEALER. | ||||
| REFLATTEN AFTER STAMPING. | ||||
| INSTALL ON LH SIDE OF BLOCK NEAR REAR FACE ON CAMSHAFT COMPARTMENT USING 7B-3028 DRIVE SCREWS. | ||||
| STAMP SERIAL NUMBER IN BLOCK JUST BELOW PLATE IN FIGURES 6 HIGH. | ||||
| 7B-3028 | [2] | SCREW-DRIVE (NO 4X 3/16-IN) | ||
#M00686320761
354-0498: COVER GP-SHIPPING
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS#M00686320762
205-7860: FILM GP
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 239-6986 | [1] | PLATE-SERIAL NUMBER (MACHINE)(17-PIN) |
#M00686320763
303-3428: FILM-IDENTIFICATION
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#M00686320764
109-5381: KIT-GASKET
109-5381 KIT-GASKET -AUXILIARY WATER PUMP
S/N E2N1-UP; E2T1-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES
FIELD INSTALLATION
S/N E2N1-UP; E2T1-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES
FIELD INSTALLATION
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 3P-6061 | [2] | GASKET | ||
| 5N-1940 | [1] | GASKET | ||
| 5G-1442 | [2] | GASKET | ||
| 131-3815 | [1] | SEAL GP | ||
| 9X-4594 | [1] | SEAL-LIP TYPE | ||
| 3J-1907 | [2] | SEAL-O-RING | ||
| 235-3546 | [1] | SEAL-O-RING | ||
| 6V-3348 | [1] | SEAL-O-RING | ||
| 4F-7387 | [1] | SEAL-O-RING | ||
| 9M-3786 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PART THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#M00686320765
301-0609: KIT-GASKET
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS#M00686320766
436-2592: KIT-GASKET
436-2592 KIT-GASKET -WATER PUMP
S/N E2N1-UP; E2T1-UP
CONTAINS THE GASKETS & SEALS TO REINSTALL WATER PUMP & ATTACHING LINES
FIELD INSTALLATION
S/N E2N1-UP; E2T1-UP
CONTAINS THE GASKETS & SEALS TO REINSTALL WATER PUMP & ATTACHING LINES
FIELD INSTALLATION
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS#M00686320767
353-5995: KIT-SEAL
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS#M00686320768
525-1867: KIT-SERVICE
525-1867 KIT-SERVICE
S/N E2N1-UP; E2T1-UP
PART OF 525-1865 MOTOR GP-ELECTRIC, 456-4876 PUMP GP-PRELUBRICATION
AN ATTACHMENT
S/N E2N1-UP; E2T1-UP
PART OF 525-1865 MOTOR GP-ELECTRIC, 456-4876 PUMP GP-PRELUBRICATION
AN ATTACHMENT
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS#M00686320769
580-1604: KIT-VALVE
For full view, you need register
Parts for your G3512 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 576-2770 | [1] | ACTUATOR GP-ELECTRONIC | ||
| 522-5456 | [1] | ADAPTER | ||
| 4L-3776 | [4] | BOLT (1/4-20X4.75-IN) | ||
| 6V-8635 | [1] | CONNECTOR | ||
| 6V-9008 | [1] | ELBOW | ||
| 546-1206 | [1] | ELBOW | ||
| 452-2248 | [2] | GASKET | ||
| 527-6707 | [1] | GASKET | ||
| 550-0995 | [1] | HARNESS AS-CONTROL | ||
| 546-2371 I | [1] | HOSE AS | ||
| 5P-8862 | [2] | SEAL-O-RING | ||
| 6V-5266 | [2] | SEAL-O-RING | ||
| 161-8068 | [1] | SEAL-O-RING | ||
| 228-7089 | [1] | SEAL-O-RING | ||
| 228-7093 | [2] | SEAL-O-RING | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 238-5084 | [2] | SEAL-O-RING | ||
| 5P-0537 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
Information:
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS
Operation and Maintenance Manual
Service Magazine
Ordering a Replacement Machine Identification Plate {7405, 7557}
Ordering a Replacement Machine Identification Plate {7405, 7557}
Ordering a Replacement Machine Identification Plate {7405, 7557}
Caterpillar Parts SIS Catalog G3512 :
Truck sale:
124,000 USD
