AVSPARE.COM
parts catalog

966M Wheel Loader EJA00001-UP (MACHINE) POWERED BY C9.3 Engine POWER TRAIN Caterpillar SIS




Parts group 966M:

  For full view, you need register
POWER TRAIN

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Service Magazine
An Updated Ride Control Accumulator Pre-Charge Adjustment Procedure Is Used on Certain Medium Wheel Loaders {0738, 4263, 4264, 4331, 5077, 5081, 7474}
An Updated Ride Control Accumulator Pre-Charge Adjustment Procedure Is Used on Certain Medium Wheel Loaders {0738, 4263, 4264, 4331, 5077, 5081, 7474}
Testing and Adjusting
Tests (Cat ET)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Calibrations (Graphical Display)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Calibrations (Graphical Display)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Operation and Maintenance Manual
Service Brake Wear Indicator - Check
966M and 972M Wheel Loaders
Axle Oscillation Bearings - Lubricate
966M and 972M Wheel Loaders
Braking System - Test
966M and 972M Wheel Loaders
Service Brake Control
966M and 972M Wheel Loaders
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Field Installation for <NOBR>435-3712</NOBR> Axle Oil Cooler Kit for 966M and 972M Medium Wheel Loader {0679, 1365, 1365, 3016, 3282, 5057, 5073, 7050}
Field Installation for 435-3712 Axle Oil Cooler Kit for 966M and 972M Medium Wheel Loader {0679, 1365, 1365, 3016, 3282, 5057, 5073, 7050}
Installing the <NOBR>484-6927</NOBR> Guard Kit on Certain 966M and 972M Wheel Loaders {3282, 7150, 7185, 7185}
Installing the 484-6927 Guard Kit on Certain 966M and 972M Wheel Loaders {3282, 7150, 7185, 7185}
Axle Temperature Troubleshooting For Certain L Series and M Series Medium Wheel Loaders {1365, 1408, 3016, 3296, 3297}
Axle Temperature Troubleshooting For Certain L Series and M Series Medium Wheel Loaders {1365, 1408, 3016, 3296, 3297}
Technical Information Bulletin
Oil Leaks From the Axle Between the Leg Housing and the Center Housing On Certain 966M and 972M Medium Wheel Loaders {3013, 3260, 3278}
Oil Leaks From the Axle Between the Leg Housing and the Center Housing On Certain 966M and 972M Medium Wheel Loaders {3013, 3260, 3278}
Specifications
Brake and Planetary
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Parking Brake
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Parking Brake Control
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Axle Mounting
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Oscillating Axle Housing (Rear)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Oscillating Axle Housing (Rear)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Fixed Axle Housing (Front)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Parking Brake
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Systems Operation
General Information (Power Train System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Location of Components (Power Train System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Service Brake Wear Indicator
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Fixed Axle (Front) and Oscillating Axle (Rear)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Service Brakes
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Reuse And Salvage Guidelines
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion Support {0679, 3260, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion {0679, 3268}
Thermal Spray Procedures for Wheel Loader Trunnion {0679, 3268}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Testing and Adjusting
Differential Pinion Preload - Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Differential Backlash and Bearings - Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Service Brake Wear Indicator - Check
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Service Brakes - Test
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Brake System Air - Purge
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Troubleshooting
Differential and Final Drive
966M and 972M Wheel Loaders
Disassembly and Assembly
Duo-Cone Conventional Seals - Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Parking Brake - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Parking Brake - Assemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Fixed Axle (Front) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Oscillating Axle (Rear) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Differential and Bevel Gear - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Trunnion Support (Oscillating Axle, Front) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Trunnion Support (Oscillating Axle, Rear) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Axle Housing - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Service Brakes - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Axle Housing - Assemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Parking Brake - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Testing and Adjusting
Differential Pinion Preload - Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Differential Backlash and Bearings - Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Brake System Air - Purge
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Reuse And Salvage Guidelines
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Specifications
Brake and Planetary
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Systems Operation
Service Brakes
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Reuse And Salvage Guidelines
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Disassembly and Assembly
Service Brakes - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Specifications
Brake and Planetary
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Parking Brake
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Parking Brake
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Systems Operation
Parking Brake
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Service Brakes
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Testing and Adjusting
Parking Brake - Test and Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Disassembly and Assembly
Parking Brake - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Parking Brake - Assemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Parking Brake - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Reuse And Salvage Guidelines
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Specifications
Foot Switch (Differential Lock)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Solenoid Valve (Differential Lock)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Differential Lock Control
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Speed Sensor
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Testing and Adjusting
Machine Preparation for Troubleshooting
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Technical Information Bulletin
ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167}
ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167}
Specifications
Relief Valve (Torque Converter Outlet)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Speed Sensor (Transmission Output)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Transmission Hydraulic Control
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Transmission Hydraulic Control
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Systems Operation
Transmission Hydraulic System
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Modulating Valve (Torque Converter Lockup Clutch)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Transmission Hydraulic Control Operation
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Testing and Adjusting
Transmission Pressures - Test and Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Bench Test Procedures
Bench Test Procedure for 966L, 966M, 972L, and 972M Wheel Loader Transmission {3030, 3066, 3073, 3101}
Bench Test Procedure for 966L, 966M, 972L, and 972M Wheel Loader Transmission {3030, 3066, 3073, 3101}
Disassembly and Assembly
Relief Valve (Transmission Hydraulic Control) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Service Magazine
Maximizing Transmission Shift Performance on Certain M Series Medium Wheel Loaders {3030, 3065, 3073, 3167, 3168}
Maximizing Transmission Shift Performance on Certain M Series Medium Wheel Loaders {3030, 3065, 3073, 3167, 3168}
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Operation and Maintenance Manual
Special Instruction
Procedure for the Removal of Bolts That Are Used for Shipping on Differentials {3258}
Procedure for the Removal of Bolts That Are Used for Shipping on Differentials {3258}
Specifications
Differential (Standard)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Bevel Gear and Pinion (Oscillating Axle)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Bevel Gear and Pinion (Oscillating Axle)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Differential (Standard)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Bevel Gear and Pinion (Fixed Axle)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Bevel Gear and Pinion (Oscillating Axle)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Systems Operation
Differential (Open)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Differential (Locking)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Reuse And Salvage Guidelines
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures of Differential Carrier Assemblies for Wheel Loader, Wheel Dozer, Compactor, Integrated Toolcarrier, Articulated Truck, and Wheel Tractor Scraper (WTS) {0679, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Off-Highway Trucks and Tractors, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential - Support Bearing Journal {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Thermal Spray Procedures for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, and Integrated Toolcarriers Differential Case - Flange End {0679, 3258, 3284}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Testing and Adjusting
Differential Pinion Preload - Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Differential Backlash and Bearings - Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Differential Lock Pressure - Test
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Troubleshooting
Differential and Final Drive
966M and 972M Wheel Loaders
Disassembly and Assembly
Differential Pinion - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Differential Pinion - Assemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Differential - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Differential - Assemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Differential (Locking) - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Differential and Bevel Gear - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Differential (Locking) - Assemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Service Magazine
New Axle Group Yoke Assembly Is Now Used on Certain Medium Wheel Loaders {3254, 3256}
New Axle Group Yoke Assembly Is Now Used on Certain Medium Wheel Loaders {3254, 3256}
Specifications
Solenoid Valve (Differential Lock)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283}
Thermal Spray Procedures for Differential Case - Housing Face & Pinion Thrust Face {3283}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Testing and Adjusting
Differential Pinion Preload - Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Differential Backlash and Bearings - Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Differential Lock Pressure - Test
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Specifications
Output Transfer Gears
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Graphic Color Codes
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Torque Converter and Pump Drive Housing
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Reuse And Salvage Guidelines
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Testing and Adjusting
Machine Preparation for Troubleshooting
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Disassembly and Assembly
Parking Brake - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Systems Operation
Location of Components (Power Train System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Specifications
Torque Converter - Housing Group
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Torque Converter
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Operation and Maintenance Manual
Transmission Oil - Change
966M and 972M Wheel Loaders
Transmission Oil Level - Check
966M and 972M Wheel Loaders
Specifications
Power Train Oil Filler
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Power Train Oil Filler
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Operation and Maintenance Manual
Oil Filter - Inspect
966M and 972M Wheel Loaders
Transmission Oil Filter - Replace
966M and 972M Wheel Loaders
Transmission Oil Sample - Obtain
966M and 972M Wheel Loaders
Specifications
Oil Filter (Transmission)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Transmission Filter and Lines
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Systems Operation
Oil Filter (Power Train)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Transmission Oil Filter Base - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Transmission Oil Filter Base - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Transmission Oil Filter Base - Assemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Service Magazine
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Technical Information Bulletin
The Output Transfer Gear Yoke Assembly May Have Been Manufactured Incorrectly on Certain Medium Wheel Loaders {3075, 3159}
The Output Transfer Gear Yoke Assembly May Have Been Manufactured Incorrectly on Certain Medium Wheel Loaders {3075, 3159}
Specifications
Speed Sensor (Transmission Output)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Output Transfer Gears
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Transmission Magnetic Screen
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Output Transfer Gears
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Input Transfer Gear And Output Transfer Gear Lubrication
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Testing and Adjusting
Output Transfer Gears - Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Disassembly and Assembly
Torque Converter, Transmission and Output Transfer Gears - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Torque Converter from Transmission, Output Transfer Gears - Separate
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Torque Converter to Transmission, Output Transfer Gears - Connect
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Parking Brake - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Parking Brake - Assemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Output Transfer Gears - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Output Transfer Gears - Assemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Transmission from Output Transfer Gears - Separate
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Transmission to Output Transfer Gears - Connect
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Parking Brake - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Service Magazine
New Improved Yokes on the Transmission Output Shaft Are Used on Certain Landfill Compactors, Soil Compactors, Wheel Dozers, and Medium Wheel Loaders {3030, 3075, 3159}
New Improved Yokes on the Transmission Output Shaft Are Used on Certain Landfill Compactors, Soil Compactors, Wheel Dozers, and Medium Wheel Loaders {3030, 3075, 3159}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Special Instruction
Field Installation for <NOBR>435-3712</NOBR> Axle Oil Cooler Kit for 966M and 972M Medium Wheel Loader {0679, 1365, 1365, 3016, 3282, 5057, 5073, 7050}
Field Installation for 435-3712 Axle Oil Cooler Kit for 966M and 972M Medium Wheel Loader {0679, 1365, 1365, 3016, 3282, 5057, 5073, 7050}
Installing the <NOBR>484-6927</NOBR> Guard Kit on Certain 966M and 972M Wheel Loaders {3282, 7150, 7185, 7185}
Installing the 484-6927 Guard Kit on Certain 966M and 972M Wheel Loaders {3282, 7150, 7185, 7185}
Axle Temperature Troubleshooting For Certain L Series and M Series Medium Wheel Loaders {1365, 1408, 3016, 3296, 3297}
Axle Temperature Troubleshooting For Certain L Series and M Series Medium Wheel Loaders {1365, 1408, 3016, 3296, 3297}
Testing and Adjusting
Differential Lock Pressure - Test
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Field Installation for <NOBR>435-3712</NOBR> Axle Oil Cooler Kit for 966M and 972M Medium Wheel Loader {0679, 1365, 1365, 3016, 3282, 5057, 5073, 7050}
Field Installation for 435-3712 Axle Oil Cooler Kit for 966M and 972M Medium Wheel Loader {0679, 1365, 1365, 3016, 3282, 5057, 5073, 7050}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Systems Operation
Oil Filter (Power Train)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Testing and Adjusting
Transmission Pressures - Test and Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Disassembly and Assembly
Relief Valve (Torque Converter Outlet) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Specifications
Speed Sensor
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Transmission Filter and Lines
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Systems Operation
Transmission Hydraulic System
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Systems Operation
General Information (Power Train System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Location of Components (Power Train System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Brake System Air - Purge
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Pump and Motor - Disassemble - Variator
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Pump and Motor - Assemble - Variator
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Systems Operation
Graphic Color Codes
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
General Information (Power Train System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
966M and 972M Wheel Loaders
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications
Transmission Oil Pump
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Systems Operation
General Information (Power Train System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Location of Components (Power Train System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Torque Converter and Pump Drive Housing
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Transmission Oil Pump
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Axle Oil Cooler - If Equipped
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for 966L, 966M, 972L, and 972M Wheel Loader Transmission {3030, 3066, 3073, 3101}
Bench Test Procedure for 966L, 966M, 972L, and 972M Wheel Loader Transmission {3030, 3066, 3073, 3101}
Disassembly and Assembly
Piston Pump (Steering) - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
Piston Pump (Steering) - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
Transmission Oil Pump - Disassemble - Gear Pump
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Transmission Oil Pump - Assemble - Gear Pump
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Pump and Motor - Disassemble - Variator
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Pump and Motor - Assemble - Variator
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installing the <NOBR>484-6927</NOBR> Guard Kit on Certain 966M and 972M Wheel Loaders {3282, 7150, 7185, 7185}
Installing the 484-6927 Guard Kit on Certain 966M and 972M Wheel Loaders {3282, 7150, 7185, 7185}
Operation and Maintenance Manual
Drive Shaft Spline (Center) - Lubricate
966M and 972M Wheel Loaders
Drive Shaft Universal Joints - Lubricate
966M and 972M Wheel Loaders
Drive Shaft Support Bearing - Lubricate
966M and 972M Wheel Loaders
Specifications
Drive Shaft
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Disassembly and Assembly
Drive Shaft (Rear) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Drive Shaft (Center) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Carrier Bearing (Drive Shaft) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Drive Shaft (Front) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Specifications
Drive Shaft
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
An Updated Ride Control Accumulator Pre-Charge Adjustment Procedure Is Used on Certain Medium Wheel Loaders {0738, 4263, 4264, 4331, 5077, 5081, 7474}
An Updated Ride Control Accumulator Pre-Charge Adjustment Procedure Is Used on Certain Medium Wheel Loaders {0738, 4263, 4264, 4331, 5077, 5081, 7474}
Specifications
Relief Valve (Torque Converter Outlet)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Torque Converter - Housing Group
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Torque Converter
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Systems Operation
Graphic Color Codes
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
General Information (Power Train System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Location of Components (Power Train System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Transmission Hydraulic System
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Torque Converter (Lockup)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Torque Converter and Pump Drive Housing
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Repair of Pump Drive Gears for Torque Converters {3100, 3101}
Repair of Pump Drive Gears for Torque Converters {3100, 3101}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Testing and Adjusting
Machine Preparation for Troubleshooting
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedure for 966L, 966M, 972L, and 972M Wheel Loader Transmission {3030, 3066, 3073, 3101}
Bench Test Procedure for 966L, 966M, 972L, and 972M Wheel Loader Transmission {3030, 3066, 3073, 3101}
Troubleshooting
Torque Converter
966M and 972M Wheel Loaders
Disassembly and Assembly
Torque Converter, Transmission and Output Transfer Gears - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Torque Converter (Freewheel Stator) (Lockup) - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Torque Converter (Freewheel Stator) (Lockup) - Assemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Torque Converter from Transmission, Output Transfer Gears - Separate
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Torque Converter to Transmission, Output Transfer Gears - Connect
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Operation and Maintenance Manual
Transmission Oil Sample - Obtain
966M and 972M Wheel Loaders
Transmission Oil - Change
966M and 972M Wheel Loaders
Transmission Oil Level - Check
966M and 972M Wheel Loaders
Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Specifications
Modulating Valve (Torque Converter Lockup Clutch)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Speed Sensor (Transmission Output)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Parking Brake
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Engine and Transmission Mounting
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Transmission Planetary
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Output Transfer Gears
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Torque Converter - Housing Group
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Torque Converter
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Transmission Oil Pump
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Parking Brake
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Graphic Color Codes
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
General Information (Power Train System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Location of Components (Power Train System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Transmission Hydraulic System
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Transmission Magnetic Screen
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Transmission Lubrication
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Output Transfer Gears
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Transmission Planetary
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Input Transfer Gear And Output Transfer Gear Lubrication
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with F37 and F37X Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Filtration Procedure for Wheel Loader Transmission Oil (Equipped with an Ecology Drain) {0680, 0768, 3000, 3030, 4000}
Testing and Adjusting
Transmission Speed for Forward Directional Shift - Program
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Transmission Speed for Reverse Directional Shift - Program
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Transmission Pressures - Test and Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Differential Pinion Preload - Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Differential Backlash and Bearings - Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Output Transfer Gears - Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Parking Brake - Test
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Machine Preparation for Troubleshooting
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedure for 966L, 966M, 972L, and 972M Wheel Loader Transmission {3030, 3066, 3073, 3101}
Bench Test Procedure for 966L, 966M, 972L, and 972M Wheel Loader Transmission {3030, 3066, 3073, 3101}
Troubleshooting
Transmission Clutch Slips
966M and 972M Wheel Loaders
Transmission
966M and 972M Wheel Loaders
Disassembly and Assembly
Torque Converter, Transmission and Output Transfer Gears - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Torque Converter from Transmission, Output Transfer Gears - Separate
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Torque Converter to Transmission, Output Transfer Gears - Connect
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Transmission from Output Transfer Gears - Separate
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Transmission to Output Transfer Gears - Connect
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Transmission Planetary - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Transmission Planetary - Assemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Transmission Planetary - Disassemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Engine and Transmission - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
Transmission Oil Pump - Remove and Install - Gear Pump
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Parking Brake - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Pump and Motor - Disassemble - Variator
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Pump and Motor - Assemble - Variator
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Transmission Planetary - Assemble
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Service Magazine
Maximizing Transmission Shift Performance on Certain M Series Medium Wheel Loaders {3030, 3065, 3073, 3167, 3168}
Maximizing Transmission Shift Performance on Certain M Series Medium Wheel Loaders {3030, 3065, 3073, 3167, 3168}
New Improved Yokes on the Transmission Output Shaft Are Used on Certain Landfill Compactors, Soil Compactors, Wheel Dozers, and Medium Wheel Loaders {3030, 3075, 3159}
New Improved Yokes on the Transmission Output Shaft Are Used on Certain Landfill Compactors, Soil Compactors, Wheel Dozers, and Medium Wheel Loaders {3030, 3075, 3159}
Specifications
Modulating Valve (Torque Converter Lockup Clutch)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Solenoid Valve (Differential Lock)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Relief Valve (Torque Converter Outlet)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Systems Operation
Transmission Hydraulic Control Operation
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Disassembly and Assembly
Air Control Valve - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
Special Instruction
Axle Temperature Troubleshooting For Certain L Series and M Series Medium Wheel Loaders {1365, 1408, 3016, 3296, 3297}
Axle Temperature Troubleshooting For Certain L Series and M Series Medium Wheel Loaders {1365, 1408, 3016, 3296, 3297}
Specifications
Valve - Expansion
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Disassembly and Assembly
Differential Lock Valve - Remove and Install - Front Axle Differential Lock Valve
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
Differential Lock Valve - Disassemble - Front Axle Differential Lock Valve
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
Differential Lock Valve - Assemble - Front Axle Differential Lock Valve
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
Differential Lock Valve - Remove and Install - Rear Axle Differential Lock Valve
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
Differential Lock Valve - Disassemble - Rear Axle Differential Lock Valve
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
Differential Lock Valve - Assemble - Rear Axle Differential Lock Valve
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders
Operation and Maintenance Manual
Transmission Oil Sample - Obtain
966M and 972M Wheel Loaders
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Specifications
Modulating Valve (Torque Converter Lockup Clutch)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Systems Operation
Modulating Valve (Torque Converter Lockup Clutch)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Technical Information Bulletin
ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167}
ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167}
Specifications
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Torque Converter Lockup Clutch)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Transmission Hydraulic Control
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Transmission Hydraulic Control
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Systems Operation
Modulating Valve (Torque Converter Lockup Clutch)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Testing and Adjusting
Transmission Pressures - Test and Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Calibrations (Cat ET)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Calibrations (Graphical Display)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Calibration Error Codes
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Calibrations (Graphical Display)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Disassembly and Assembly
Modulating Valve (Transmission Clutch) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Specifications
Relief Valve (Torque Converter Outlet)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Relief Valve
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Relief Valve
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Relief Valve - Direct operated
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Relief Valve
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Relief Valve
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Transmission Hydraulic Control
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Transmission Hydraulic Control
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Relief Valve - Brake
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Testing and Adjusting
Transmission Pressures - Test and Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Relief Valve (Torque Converter Outlet) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Relief Valve (Transmission Hydraulic Control) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Systems Operation
Transmission Hydraulic System
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Transmission Hydraulic Control Operation
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Testing and Adjusting
Transmission Pressures - Test and Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Specifications
Shuttle Valve
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Shuttle Valve
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Solenoid Valve (Differential Lock)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Solenoid Valve
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Solenoid Valve
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Solenoid Valve
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Solenoid Valve
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Testing and Adjusting
Tests (Cat ET)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Calibrations (Cat ET)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Calibrations (Graphical Display)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Calibration Error Codes
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Calibrations (Graphical Display)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Troubleshooting
Solenoid Valve - Test
966M and 972M Wheel Loaders
Solenoid Return - Test
966M and 972M Wheel Loaders
Specifications
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Speed Sensor (Transmission Output)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Manifold Group
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Transmission Hydraulic Control
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Transmission Hydraulic Control
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Modulating Valve (Transmission Hydraulic Control)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Systems Operation
Transmission Hydraulic System
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Transmission Hydraulic Control Operation
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Testing and Adjusting
Transmission Pressures - Test and Adjust
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Bench Test Procedures
Bench Test Procedure for 966L, 966M, 972L, and 972M Wheel Loader Transmission {3030, 3066, 3073, 3101}
Bench Test Procedure for 966L, 966M, 972L, and 972M Wheel Loader Transmission {3030, 3066, 3073, 3101}
Service Magazine
Maximizing Transmission Shift Performance on Certain M Series Medium Wheel Loaders {3030, 3065, 3073, 3167, 3168}
Maximizing Transmission Shift Performance on Certain M Series Medium Wheel Loaders {3030, 3065, 3073, 3167, 3168}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Operation and Maintenance Manual
Tire Inflation Pressure Adjustment
966M and 972M Wheel Loaders
Tire Inflation with Nitrogen
966M and 972M Wheel Loaders
Tire Inflation Pressure
966M and 972M Wheel Loaders
Tire Inflation - Check
966M and 972M Wheel Loaders
Special Instruction
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Specifications
Wheel and Tire
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Reuse And Salvage Guidelines
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Disassembly and Assembly
Tire and Rim (Front) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Tire and Rim (Rear) - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Service Magazine
New Recommendations for Tire Size Differences {4203}
New Recommendations for Tire Size Differences {4203}
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Specifications
Parking Brake
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Parking Brake Control
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Parking Brake
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Testing and Adjusting
Service Brake System Pressure - Test
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
966M and 972M Wheel Loaders
Special Instruction
Field Installation for <NOBR>435-3712</NOBR> Axle Oil Cooler Kit for 966M and 972M Medium Wheel Loader {0679, 1365, 1365, 3016, 3282, 5057, 5073, 7050}
Field Installation for 435-3712 Axle Oil Cooler Kit for 966M and 972M Medium Wheel Loader {0679, 1365, 1365, 3016, 3282, 5057, 5073, 7050}
Installation Procedure for an Axle Oil Cooler on Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {1365}
Installation Procedure for an Axle Oil Cooler on Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {1365}
Specifications
Control Manifold (Axle Oil Flow Divider)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Lines (Axle Oil Cooler)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Torque Converter Cooler Lines
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Transmission Oil Cooler
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Torque Converter Cooler Lines
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Lines (Axle Oil Cooler)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems
Systems Operation
Transmission Oil Cooler
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Axle Oil Cooler - If Equipped
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Oil Coolers and Cooling System Operation
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Disassembly and Assembly
Transmission Oil Cooler - Remove and Install
966M Tier 4 and 972M Tier 4 Wheel Loaders Power Train
Service Magazine
A Procedure to Install an Axle Oil Cooler Is Available for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {1365}
A Procedure to Install an Axle Oil Cooler Is Available for Certain 966L, 966M, 972L, and 972M Medium Wheel Loaders {1365}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Location of Components (Power Train System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Parking Brake
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Service Brakes
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Planetary Final Drives for Wheel Loaders, Wheel Tractors, Compactors, Underground Articulated Trucks {4011, 4050, 4051}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Repair of Web Cracks In Final Drive Planetary Carriers {4092}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader - Wheel Bearing ID Bore {0679, 4201, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Thermal Spray Procedures for Wheel Loader Spindle (OD) {3259, 4205, 4215}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}

Truck sale:

 
 
Caterpillar 966M
- Wheel Loaders
FINANZAUTO S.A.
278,250 
 
175,289 
Caterpillar 966M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
 
Caterpillar 966MXE, Wheel Loaders, Construction
- Wheel Loaders
YANCEY BROS. CO.
 
Caterpillar 966MXE, Wheel Loaders, Construction
- Wheel Loaders
YANCEY BROS. CO.
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. CatĀ® and CaterpillarĀ® are registered trademarks of Caterpillar, Inc.