132-1829 ALARM GP S/N YBK168-UP; ZBM155-UP 24-VOLT PART OF 474-7123 WIRING GP-CAB 320D2 EXCAVATOR

Pos.	Part No	Qty	Parts name
1.	329-5254	[1]	PULLEY (12-GROOVE)
2.	344-1722	[1]	TENSIONER-BELT
3.	344-5081	[1]	ALTERNATOR GP-CHARGING (24-VOLT, 115-AMPERE)
4.	100-4463 M	[1]	BOLT (M10X1.5X80-MM)
5.	164-7468 M	[4]	BOLT (M10X1.5X95-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#M00697220072

399-3647: BATTERY & WIRING GP

BATTERY & WIRING GP

399-3647 BATTERY & WIRING GP
S/N YBK1-UP; ZBM1-UP
PART OF 506-4049, 519-2483 CHASSIS AR

i05259814 M0069722

3993647 BATTERY & WIRING GP Parts scheme

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3T-5760	[2]	BATTERY GP (12-VOLT, 750-CCA)(MAINTENANCE FREE)
			(EACH INCLUDES)
	123-1373	[6]	CAP AS-FILLER (7/8-9-THD)
2.	5I-8270	[1]	COVER-BATTERY
3.	6W-6005	[1]	HOLD-DOWN-BATTERY
4.	132-1805	[1]	STRAP AS-GROUND
5.	134-3355	[2]	STRAP AS
6.	170-6929	[1]	CABLE AS
	159-8049 E		CABLE (00-GA, RED)(31-CM)
	9G-0002	[1]	COVER AS-TERMINAL (RED)
	9G-0005	[1]	COVER AS-TERMINAL (BLACK)
			(EACH COVER AS INCLUDES)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	8C-5918	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	8T-9756	[1]	TERMINAL AS-BATTERY (POSITIVE)
			(EACH TERMINAL AS INCLUDES)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
7.	231-1827	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	159-8050 E		CABLE (00-GA, BLACK)(23-CM)
	9G-0003	[1]	COVER AS-TERMINAL (BLACK)(BATTERY NEGATIVE)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	9G-8909	[1]	COVER-TERMINAL (BLACK)(JUNCTION BLOCK)
	8T-9757	[1]	TERMINAL AS-BATTERY (NEGATIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
8.	238-2501	[1]	KNOB
9.	238-2528	[1]	ROD
11.	439-4128 C	[1]	BRACKET AS
12.	388-6760	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	6V-2722 D		TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)
	8N-0869	[1]	COVER-TERMINAL (RED)(STARTING MOTOR)
	9G-0004	[1]	COVER AS-TERMINAL (RED)(BATTERY POSITIVE)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	8C-5917	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
	159-8049 E		CABLE (00-GA, RED)(239-CM)
13.	091-9035	[1]	SPACER (11X25X20-MM THK)
14.	2G-8767	[3]	WASHER (10.5X60X3-MM THK)
15.	4K-8864	[1]	CLIP (LOOP)
16.	5C-7261 M	[1]	NUT (M8X1.25-THD)
17.	6G-2256	[2]	CLAMP
18.	6G-2263	[2]	SPACER (10.5X19X28.5-MM THK)
19.	6K-8178	[3]	CLIP (LOOP)
20.	8T-4186 CM	[2]	BOLT (M10X1.5X40-MM)
21.	8T-4121	[11]	WASHER-HARD (11X21X2.5-MM THK)
22.	8T-4133 M	[1]	NUT (M10X1.5-THD)
23.	8T-4136 CM	[2]	BOLT (M10X1.5X25-MM)
24.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
25.	8T-4185 CM	[1]	BOLT (M10X1.5X50-MM)
26.	8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
27.	8T-4226	[1]	WASHER-PLATED (10.5X45X3-MM THK)
28.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#M00697220073

426-4906: CONTROL & MTG GP-COMMUNICATION

CONTROL & MTG GP-COMMUNICATION

426-4906 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK CELLULAR
S/N YBK1-UP; ZBM1-UP
PART OF 478-1958 CONTROL AR-COMMUNICATION

i06661036 M0069722

4264906 CONTROL & MTG GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-9896	[8]	MOUNT (ISOLATION)
2.	376-6478 Y	[1]	CONTROL GP-COMMUNICATION (PRODUCT LINK CELLULAR)
3.	8C-5608	[4]	SPACER (6.5X9.5X25.4-MM THK)
4.	8C-8451 M	[4]	BOLT (M6X1X40-MM)
5.	9X-6165	[4]	WASHER (6.5X22X2.5-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#M00697220074

477-9413: CONTROL & MTG GP-COMMUNICATION

CONTROL & MTG GP-COMMUNICATION

477-9413 CONTROL & MTG GP-COMMUNICATION -PRODUCT LINK CELLULAR
S/N YBK1-UP; ZBM1-UP
PART OF 467-4498 INSTALLATION AR-COMMUNICATION

i06803889 M0069722

4779413 CONTROL & MTG GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	440-2105 Y	[1]	CONTROL GP-UNPROGRAMMED (PRODUCT LINK ELITE 641 CELLULAR)
2.	462-6495	[1]	PLUG AS
	8T-8737	[8]	PLUG-SEAL
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
3.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
4.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#M00697220075

472-7684: CONTROL & MTG GP-ELECTRONIC

CONTROL & MTG GP-ELECTRONIC

472-7684 CONTROL & MTG GP-ELECTRONIC
S/N YBK1-UP; ZBM1-UP
PART OF 506-4050 OPERATOR AR

i06660219 M0069722

4727684 CONTROL & MTG GP-ELECTRONIC Parts scheme

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	458-0526	[4]	WASHER-HARD (6.6X12X2-MM THK)
2.	472-7689 Y	[1]	CONTROL GP-ELECTRONIC
3.	5C-7883 M	[4]	BOLT-SOCKET HEAD (M6X1X16-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#M00697220076

478-1958: CONTROL AR-COMMUNICATION

CONTROL AR-COMMUNICATION

478-1958 CONTROL AR-COMMUNICATION
S/N YBK1-UP; ZBM1-UP

i06660994 M0069722

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
426-4906 Y	[1]	CONTROL & MTG GP-COMMUNICATION (PRODUCT LINK CELLULAR)
Y	[1]	FILM GP (PRODUCT LINK RADIO, U.S.)
366-8771 Y	[1]	FILM GP (PRODUCT LINK RADIO, INTL)
399-4217 Y	[1]	MOUNTING GP-ANTENNA (PRODUCT LINK)
473-9339 Y	[1]	WIRING GP-COMMUNICATION
Y		SEPARATE ILLUSTRATION

#M00697220077

376-6478: CONTROL GP-COMMUNICATION

CONTROL GP-COMMUNICATION

376-6478 CONTROL GP-COMMUNICATION -PRODUCT LINK CELLULAR
S/N YBK1-UP; ZBM1-UP
PART OF 426-4906 CONTROL & MTG GP-COMMUNICATION

i04925310 M0069722

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
351-8490 Y	[1]	CONTROL GP-UNPROGRAMMED (PRODUCT LINK 522)
476-1900	[1]	SOFTWARE GP-MONITOR (PRODUCT LINK 522)
Y		SEPARATE ILLUSTRATION

#M00697220078

472-7689: CONTROL GP-ELECTRONIC

CONTROL GP-ELECTRONIC

472-7689 CONTROL GP-ELECTRONIC
S/N YBK1-167; ZBM1-154
PART OF 472-7684 CONTROL & MTG GP-ELECTRONIC

i06660221 M0069722

4727689 CONTROL GP-ELECTRONIC Parts scheme

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	458-0526	[4]	WASHER-HARD (6.6X12X2-MM THK)
2.	9X-8256	[8]	WASHER (6.6X12X2-MM THK)
3.	472-7732	[1]	HARNESS AS-CONTROL
	8T-8729	[24]	PIN-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[1]	STRAP-CABLE
	8T-8737	[2]	PLUG-SEAL
	9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
	125-7874		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	9X-3401	[40]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[40]	PIN-CONNECTOR (14-GA TO 16-GA)
	202-5397	[4]	PLUG
	331-3575	[1]	RECEPTACLE AS-CONNECTOR (70-PIN)
	431-2103	[1]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	442-7945	[1]	PLUG AS-CONNECTOR (81-PIN)
	442-7946	[1]	PLUG AS-CONNECTOR (40-PIN)
	453-7871	[48]	PLUG-SEAL
4.	473-0040	[1]	BRACKET AS
5.	473-0044	[1]	COVER AS
	4I-3090	[6]	SEAL
6.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
7.	8T-2947 M	[4]	BOLT (M6X1X45-MM)
8.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
	M		METRIC PART

#M00697220079

351-8490: CONTROL GP-UNPROGRAMMED

CONTROL GP-UNPROGRAMMED

351-8490 CONTROL GP-UNPROGRAMMED -PRODUCT LINK 522
S/N YBK1-UP; ZBM1-UP
WITH SUBSCRIBER IDENTITY MODULE CARD
PART OF 376-6478 CONTROL GP-COMMUNICATION

i04864189 M0069722

3518490 CONTROL GP-UNPROGRAMMED Parts scheme

For full view, you need register

Parts for your 320D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	346-7763	[1]	COVER AS
2.	351-8488	[1]	CARD-MEMORY (SUBSCRIBER IDENTITY MODULE)
3.	7X-6315	[1]	STRAP AS-GROUND
	5P-6006 D		TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)
	2L-8078	[1]	TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)
	139-6911	[1]	RING-TERMINAL
4.	342-9022 M	[4]	SCREW-PAN HEAD (M2.5X0.45X8-MM)
5.	342-9290 M	[1]	SCREW-PAN HEAD (M4X0.7X10-MM)
6.	134-4126	[1]	WASHER (4.52X8.28X0.76-MM THK)

	476-9318 F	[1]	SOFTWARE GP-MONITOR
	D		ORDER BY THE METER
	F		NOT SHOWN
	M		METRIC PART