AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

330-5181 WIRING GP-AIR STARTING -RH AN ATTACHMENT C175-16 INDUSTRIAL ENGINE


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
BOX GP
WIRING GP

INDUSTRIAL ENGINE C175-16 INDUSTRIAL ENGINE P6R
 C175–16 Petroleum Engine P6R00001-UP M0070420 C175-16 P6R   (2016)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
352-9766 STARTING MOTOR GP-ELECTRIC
STRAINER GP-AIR LINES
355-1239 STRAINER GP-AIR LINES
WIRING GP-AIR STARTING
330-5181 WIRING GP-AIR STARTING
WIRING GP-AIR STARTING
346-6828 WIRING GP-AIR STARTING
WIRING GP-AIR STARTING
422-9065 WIRING GP-AIR STARTING
WIRING GP-AIR STARTING
525-2508 WIRING GP-AIR STARTING
 

#M00704200600
 

330-5181: WIRING GP-AIR STARTING

330-5181 WIRING GP-AIR STARTING -RH
AN ATTACHMENT
i03623757 M0070420
3305181 WIRING GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your C175-16 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 330-5182 Y [1] HARNESS AS-SOLENOID (AIR START)  
2. 4D-9517 [1] CLIP (SLOT)  
3. 4P-7582 [1] CLIP (LADDER)  
4. 4P-8134 [2] CLIP (LADDER)  
5. 7K-1181 [9] STRAP-CABLE  
  Y   SEPARATE ILLUSTRATION
 

#M00704200601
 

346-6828: WIRING GP-AIR STARTING

346-6828 WIRING GP-AIR STARTING -LH
AN ATTACHMENT
i03725856 M0070420
3466828 WIRING GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your C175-16 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [2] STRAP-CABLE  
2. 346-6827 [1] HARNESS AS-WIRING (AIR START)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  341-2380 [1] ADAPTER  
  232-0895 E CONDUIT-FLEXIBLE (9.6-MM ID)(102-CM)  
  166-7656 [1] CONNECTOR-SOCKET  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  8T-8737 [2] PLUG-SEAL  
  9X-3402 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  125-7876 [3] TUBE-HEAT SHRINK (17.78-MM DIA)  
  E   ORDER BY THE CENTIMETER
 

#M00704200602
 

422-9065: WIRING GP-AIR STARTING

422-9065 WIRING GP-AIR STARTING -RH
AN ATTACHMENT
i05395268 M0070420
4229065 WIRING GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your C175-16 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 422-9066 Y [1] HARNESS AS-SOLENOID (AIR START)  
2. 3W-1100 [1] SPACER (13.87X21.34X30-MM THK)  
3. 4P-7428 [2] CLIP (LADDER)  
4. 4P-7581 [2] CLIP (LADDER)  
5. 4P-8134 [1] CLIP (LADDER)  
6. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
7. 7K-1181 [9] STRAP-CABLE  
8. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00704200603
 

525-2508: WIRING GP-AIR STARTING

525-2508 WIRING GP-AIR STARTING
AN ATTACHMENT
i07419594 M0070420
5252508 WIRING GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your C175-16 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 096-9986 M [1] BOLT (M12X1.75X55-MM)  
2. 3W-1100 [1] SPACER (13.87X21.34X30-MM THK)  
3. 4D-9517 [1] CLIP (SLOT)  
4. 4P-7428 [1] CLIP (LADDER)  
5. 4P-7429 [1] CLIP (LADDER)  
6. 4P-7581 [2] CLIP (LADDER)  
7. 525-2509 Y [1] HARNESS AS-SENSOR  
8. 542-2340 [10] STRAP-CABLE  
9. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00704200604
 

541-1556: WIRING GP-AIR STARTING

541-1556 WIRING GP-AIR STARTING
AN ATTACHMENT
i07349640 M0070420
5411556 WIRING GP-AIR STARTING Parts scheme
  For full view, you need register

Parts for your C175-16 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 525-2509 Y [1] HARNESS AS-SENSOR  
2. 542-2340 [11] STRAP-CABLE  
3. 096-9986 M [1] BOLT (M12X1.75X55-MM)  
4. 3W-1100 [1] SPACER (13.87X21.34X30-MM THK)  
5. 4D-9517 [1] CLIP (SLOT)  
6. 4P-7428 [1] CLIP (LADDER)  
7. 4P-7429 [1] CLIP (LADDER)  
8. 4P-7581 [2] CLIP (LADDER)  
9. 4P-7582 [1] CLIP (LADDER)(LADDER)  
10. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
11. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
12. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00704200605
 

263-6764: WIRING GP-BOX

263-6764 WIRING GP-BOX -STARTING MOTOR
AN ATTACHMENT
i03701981 M0070420
2636764 WIRING GP-BOX Parts scheme
  For full view, you need register

Parts for your C175-16 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-6087 [4] MOUNT-FLEXIBLE  
2. 7K-1181 [4] STRAP-CABLE  
3. 173-5413 [1] CLAMP  
4. 131-9140 [1] CIRCUIT BREAKER AS (40-AMPERE)  
5. 148-0757 Y [2] SWITCH GP-MAGNETIC (24-VOLT)(STARTING MOTOR)  
6. 263-6772 [1] CABLE AS  
  5P-5689 [1] WIRE (8-GA, BLACK)  
  119-1093 [1] END-WIRE (8-GA)  
  2L-8052 [1] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [1] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)  
7. 263-6773 [1] CABLE AS  
  5P-5689 [1] WIRE (8-GA, BLACK)  
  119-1093 [1] END-WIRE (8-GA)  
  2L-8050 [1] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
    -OR-
  2L-8058 [1] TERMINAL-RING (8-GA, 1/4-IN SCREW)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)  
8. 285-3917 [1] CABLE AS  
  5P-5689 [1] WIRE (8-GA, BLACK)  
  2L-8050 [1] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
    -OR-
  2L-8058 [1] TERMINAL-RING (8-GA, 1/4-IN SCREW)  
  119-3662 E [4] TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)  
9. 286-0322 [1] GASKET  
10. 307-8731 [1] HARNESS AS-BOX  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  197-7565 [1] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE & WEDGE)
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
11. 130-5300 [2] CLIP  
12. 151-4977 [8] WASHER (4.445X9.525X1.092-MM THK)  
13. 5C-2890 M [4] NUT (M6X1-THD)  
14. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
15. 8T-2659 M [4] LOCKNUT (M4X0.7-THD)  
16. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00704200606
 

536-6526: WIRING GP-BOX

536-6526 WIRING GP-BOX -AFTERTREATMENT
PART OF 529-6790 WIRING GP-ENGINE
AN ATTACHMENT
i07511015 M0070420
5366526 WIRING GP-BOX Parts scheme
  For full view, you need register

Parts for your C175-16 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-9771 [1] FILM-IDENTIFICATION (CONTROL PANEL)  
2. 153-4816 [4] WASHER-HARD (5.5X18X2-MM THK)  
3. 166-6155 B [1] DUCT-WIRE  
4. 314-9084 [48] BLOCK-TERMINAL (600-VOLT, 33-AMPERE)  
5. 314-9086 [4] BLOCK-TERMINAL (600-VOLT, 33-AMPERE)  
6. 314-9090 [2] COVER-TERMINAL  
7. 314-9101 [2] BRACKET-END  
8. 438-9639 [1] FILM-IDENTIFICATION (TERMINAL STRIP)  
9. 488-8170 [1] KIT-TERMINAL  
    (INCLUDES BAR, BOLTS, NUTS, & FEET)
10. 508-1949 [3] WIRE AS  
11. 524-7247 [1] MARKER-TERMINAL  
12. 536-6530 Y [1] ENCLOSURE AS  
13. 536-6533 Y [1] HARNESS AS-BOX  
14. 542-2340 [5] STRAP-CABLE  
15. 095-0736 M [4] SCREW-MACHINE (M5X0.8X10-MM)  
16. 129-3178 M [2] LOCKNUT (M6X1-THD)  
17. 1H-3338 [6] LOCKWASHER  
18. 4B-4863 [12] WASHER (4.7X11X1.2-MM THK)  
19. 5C-2890 M [2] NUT (M6X1-THD)  
20. 8T-0337 M [12] SCREW-MACHINE (M4X0.7X12-MM)  
21. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
22. 9B-7233 [12] LOCKWASHER  
23. 204-8659 P RAIL (4-DM)  
  B   USE AS REQUIRED
  M   METRIC PART
  P   ORDER BY THE DECIMETER
  Y   SEPARATE ILLUSTRATION
 

#M00704200607
 

536-6527: WIRING GP-BOX

536-6527 WIRING GP-BOX -AFTERTREATMENT
PART OF 529-6790 WIRING GP-ENGINE
AN ATTACHMENT
i07531287 M0070420
5366527 WIRING GP-BOX Parts scheme
  For full view, you need register

Parts for your C175-16 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-9771 [1] FILM-IDENTIFICATION (CONTROL PANEL)  
2. 153-4816 [4] WASHER-HARD (5.5X18X2-MM THK)  
3. 166-6155 [1] DUCT-WIRE  
4. 314-9084 [16] BLOCK-TERMINAL (600-VOLT, 33-AMPERE)  
5. 314-9089 [2] COVER-TERMINAL  
6. 314-9101 [2] BRACKET-END  
7. 438-9665 [1] FILM-IDENTIFICATION (TERMINAL STRIP)  
8. 524-9744 [1] MARKER-TERMINAL  
9. 528-5878 [2] WIRE AS  
10. Y [1] ENCLOSURE AS  
11. 536-6534 Y [1] HARNESS AS-SENSOR  
12. 542-2340 [4] STRAP-CABLE  
13. 546-4819 [1] BLOCK-TERMINAL  
14. 095-0736 M [4] SCREW-MACHINE (M5X0.8X10-MM)  
15. 129-3178 M [2] LOCKNUT (M6X1-THD)  
16. 1H-3338 [6] LOCKWASHER  
17. 4B-4863 [8] WASHER (4.7X11X1.2-MM THK)  
18. 8T-0337 M [8] SCREW-MACHINE (M4X0.7X12-MM)  
19. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 9B-7233 [8] LOCKWASHER  
21. 204-8659 H RAIL (2-DM)  
  H   ORDER BY THE DECIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00704200608
 

536-6528: WIRING GP-BOX

536-6528 WIRING GP-BOX -AFTERTREATMENT
AN ATTACHMENT
i07642674 M0070420
5366528 WIRING GP-BOX Parts scheme
  For full view, you need register

Parts for your C175-16 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-9771 [1] FILM-IDENTIFICATION (CONTROL PANEL)  
2. 153-4816 [4] WASHER-HARD (5.5X18X2-MM THK)  
3. 314-9084 [16] BLOCK-TERMINAL (600-VOLT, 33-AMPERE)  
4. 314-9089 [2] COVER-TERMINAL  
5. 314-9101 [2] BRACKET-END  
6. 438-9665 [1] FILM-IDENTIFICATION (TERMINAL STRIP)  
7. 524-9744 [1] MARKER-TERMINAL  
8. 528-5878 [2] WIRE AS  
9. Y [1] ENCLOSURE AS  
10. 536-6535 Y [1] HARNESS AS-BOX  
11. 542-2340 [4] STRAP-CABLE  
12. 546-4819 [1] BLOCK-TERMINAL  
13. 095-0736 M [4] SCREW-MACHINE (M5X0.8X10-MM)  
14. 129-3178 M [2] LOCKNUT (M6X1-THD)  
15. 1H-3338 [6] LOCKWASHER  
16. 4B-4863 [8] WASHER (4.7X11X1.2-MM THK)  
17. 8T-0337 M [8] SCREW-MACHINE (M4X0.7X12-MM)  
18. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 9B-7233 [8] LOCKWASHER  
20. 166-6155 [1] DUCT-WIRE  
21. 204-8659 J RAIL (2-DM)  
  J   ORDER BY THE DECIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00704200609
 

346-6783: WIRING GP-ELECTRONIC CONTROL

346-6783 WIRING GP-ELECTRONIC CONTROL -CONTROL HEAD
10-M LENGTH
Type 1
AN ATTACHMENT
i04435491 M0070420
3466783 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your C175-16 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [4] STRAP-CABLE  
2. 334-5928 Y [1] HARNESS AS-CONTROL (CONTROL HEAD, 10-M)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Air Tank Moisture and Sediment - Drain
C175-16 Petroleum Generator Set Engines
Starting Motor - Inspect
C175-16 Petroleum Generator Set Engines
Starting the Engine
C175-16 Petroleum Generator Set Engines
Air Starting Motor Lines Screen - Clean
C175-16 Petroleum Generator Set Engines
Cold Weather Starting
C175-16 Petroleum Generator Set Engines
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starting Motor
C175-16 Petroleum Engines
Systems Operation
Starting System
C175-16 Petroleum Engines
Reference Information
Large Engine Control Panel II (LECP II)
Reference Information
Large Engine Control Panel III (LECP III)
Testing and Adjusting
Electric Starting System
C175-16 Petroleum Engines
Pinion Clearance Adjustment
C175-16 Petroleum Engines
General Information (Air/Electric Starting System)
C175-16 Petroleum Engines
Disassembly and Assembly
Air Starting Motor - Remove and Install
C175-16 PETROLEUM ENGINES

Caterpillar Parts SIS Catalog C175-16 :

VALVE GP-SOLENOID
318-3164 VALVE GP-SOLENOID
TRAY GP-CABLE
263-6599 TRAY GP-CABLE
TRAY GP-CABLE
263-6598 TRAY GP-CABLE
THERMOCOUPLE GP
542-1255 THERMOCOUPLE GP
THERMOCOUPLE GP
377-9429 THERMOCOUPLE GP
THERMOCOUPLE GP
325-7847 THERMOCOUPLE GP
THERMOCOUPLE GP
285-3909 THERMOCOUPLE GP
SWITCH GP-TOGGLE
7N-8001 SWITCH GP-TOGGLE
WIRING GP-AIR STARTING
346-6828 WIRING GP-AIR STARTING
WIRING GP-AIR STARTING
422-9065 WIRING GP-AIR STARTING
WIRING GP-AIR STARTING
525-2508 WIRING GP-AIR STARTING
WIRING GP-AIR STARTING
541-1556 WIRING GP-AIR STARTING
WIRING GP-BOX
263-6764 WIRING GP-BOX
WIRING GP-BOX
536-6526 WIRING GP-BOX
WIRING GP-BOX
536-6527 WIRING GP-BOX
WIRING GP-BOX
536-6528 WIRING GP-BOX

Truck sale:

Caterpillar C175-16, Construction
625,000 USD 
Caterpillar C175-16, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
2010 CAT C175-16
USD $399,000 
2010 CAT C175-16

React Power Solutions
Houston, Texas
CATERPILLAR C175-16 2007
 
CATERPILLAR C175-16 2007
- STATIONARY GENERATOR SETS
ZEPPELIN POWER SYSTEMS
>
CATERPILLAR C175-16 2010
 
CATERPILLAR C175-16 2010
- STATIONARY GENERATOR SETS
ZEPPELIN POWER SYSTEMS
>
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.