AVSPARE.COM
parts catalog

521-4916 MOUNTING GP-RECEIVER S/N PRG1-UP PART OF 519-1531 GRADE CONTROL AR 313F EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
CONTROL GP-GRADE
SENSOR GP
PANEL GP-CIRCUIT BREAKER
CIRCUIT BREAKER GP
OPERATOR STATION
CONSOLE GP
ELECTRICAL AND STARTING SYSTEM
CONTROL GP-GRADE


ELECTRICAL AND STARTING SYSTEM

CONTROL GP-GRADE
 

#M00705400290
 

521-4916: MOUNTING GP-RECEIVER

521-4916 MOUNTING GP-RECEIVER
S/N PRG1-UP
PART OF 519-1531 GRADE CONTROL AR
i06984798 M0070540
  For full view, you need register

Parts for your 313F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  252-9628 Y [2] MOUNTING GP-SENSOR (RECEIVER)  
  8T-4137 M [1] BOLT (M10X1.5X20-MM)  
  453-2837 M [8] BOLT (M16X2X55-MM)  
  527-1859 [1] CAP AS-CONNECTOR  
  4P-7581 [1] CLIP (LADDER)  
  286-3017 [2] HANDLE (RECEIVER)  
  292-0305 [2] HARNESS AS-WIRING (MAST)  
    (EACH INCLUDES)
  8T-8737 [5] PLUG-SEAL  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  126-1768 [3] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  230-4009 [1] PLUG AS-CONNECTOR (12-PIN)  
  455-0709 [1] SEAL-CONNECTOR  
  520-6041 [1] HARNESS AS-WIRING  
  370-4059 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  520-6049 [2] MAST AS (0.6-M)  
    (EACH INCLUDES)
  8C-6365 M [4] BOLT-SOCKET HEAD (M3X0.5X6-MM)  
  085-9310 [4] SPACER (16.6X32X26-MM THK)  
  391-1756 [4] WASHER (3.3X9.5X1.6-MM THK)  
  450-6212 [2] RECEIVER AS-SATELLITE  
    (EACH INCLUDES)
  528-4971 [1] SOFTWARE GP-MONITOR (SATELLITE RECEIVER)  
  204-1611 [2] STRAP (DUAL)  
  7K-1181 [6] STRAP-CABLE  
  3S-2093 [23] STRAP-CABLE  
  266-7379 [3] STRAP-CABLE  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00705400291
 

252-9628: MOUNTING GP-SENSOR

252-9628 MOUNTING GP-SENSOR
S/N PRG1-UP
PART OF 521-4916 MOUNTING GP-RECEIVER
FOR USE WITH SATELLITE RECEIVER OR LASER TARGET
i03700460 M0070540
  For full view, you need register

Parts for your 313F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9388 M [4] BOLT (M10X1.5X25-MM)  
2. 113-0693 [5] LOCKWASHER (10.2X18.1X2.2-MM THK)  
3. 8R-1803 [5] WASHER (10.5X18X1-MM THK)  
4. 289-8449 [1] HANDLE AS  
  M   METRIC PART
 

#M00705400292
 

426-1436: PANEL & MTG GP-CIRCUIT BREAKER

426-1436 PANEL & MTG GP-CIRCUIT BREAKER
S/N NLG1-UP; PRG1-UP
PART OF 426-1430, 502-1720 CONTROL & MONITOR GP-CAB
i06522386 M0070540
  For full view, you need register

Parts for your 313F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 350-8071 [1] BRACKET AS  
2. 396-1785 Y [1] PANEL GP-CIRCUIT BREAKER  
3. 396-1795 [1] PLATE AS  
4. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4137 M [12] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00705400293
 

396-1785: PANEL GP-CIRCUIT BREAKER

396-1785 PANEL GP-CIRCUIT BREAKER
S/N NLG1-UP; PRG1-UP
PART OF 426-1436 PANEL & MTG GP-CIRCUIT BREAKER
i06263435 M0070540
  For full view, you need register

Parts for your 313F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 399-3433 [1] GROMMET  
2. 399-3443 [1] BAR-BUS  
3. 171-2206 [1] CIRCUIT BREAKER AS (50-AMPERE)(GLOW PLUG)  
  1H-3244 [2] LOCKWASHER  
  4E-5724 [2] WASHER (7X12X1-MM THK)  
  8T-0122 [2] NUT-FULL (1/4-28-THD)  
4. 171-2211 [1] CIRCUIT BREAKER AS (90-AMPERE)(ALTERNATOR)  
  1H-3244 [2] LOCKWASHER  
  4E-5724 [2] WASHER (7X12X1-MM THK)  
  8T-0122 [2] NUT-FULL (1/4-28-THD)  
5. 171-2212 [1] CIRCUIT BREAKER AS (105-AMPERE)(MAIN)  
  1H-3244 [2] LOCKWASHER  
  4E-5724 [2] WASHER (7X12X1-MM THK)  
  8T-0122 [2] NUT-FULL (1/4-28-THD)  
6. 213-0772 [1] SWITCH AS-MAGNETIC (24-VOLT)  
7. 399-3431 [1] BRACKET AS  
8. 399-3434 [1] BLOCK AS-TERMINAL  
  3B-4504 [8] LOCKWASHER  
  8T-4171 M [4] BOLT (M6X1X12-MM)  
  8T-6411 M [4] SCREW-MACHINE (M6X1X12-MM)  
  9X-8256 [8] WASHER (6.6X12X2-MM THK)  
9. 399-3435 Y [1] BLOCK GP-JUNCTION  
10. 399-3438 [1] BAR-BUS  
11. 399-5257 [1] BAR-BUS  
12. 416-5612 [1] HARNESS AS-ALARM  
13. 416-5613 [1] BUS BAR-CIRCUIT BREAKER  
14. 416-5614 [1] BUS BAR-CIRCUIT BREAKER  
15. 418-6303 [1] CLIP  
16. 418-7433 [1] GROMMET  
17. 4B-2049 [2] NUT (10-32-THD)  
18. 8T-4127 M [6] SCREW-MACHINE (M5X0.8X20-MM)  
19. 6V-5645 [8] SCREW-MACHINE (10-32X0.87-IN)  
20. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
21. 5A-4631 [6] WASHER (5.5X12X0.8-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00705400294
 

431-4742: PANEL GP-FUSE

431-4742 PANEL GP-FUSE -RELAY
S/N NLG1-10000; PRG1-10000
PART OF 377-8176 WIRING GP-CAB
i05827124 M0070540
  For full view, you need register

Parts for your 313F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-8490 [16] FUSE (10-AMPERE)  
2. 113-8491 [7] FUSE (15-AMPERE)  
3. 113-8492 [4] FUSE (20-AMPERE)  
4. 113-8493 [3] FUSE (25-AMPERE)  
5. 124-3548 [3] FUSE (30-AMPERE)  
6. 141-2759 [9] FUSE (5-AMPERE)  
7. 161-3128 [1] RELAY (24-VOLT)(HYDRAULIC LOCKOUT)  
7A. 161-3128 [1] RELAY (24-VOLT)(NEUTRAL START)  
7B. 161-3128 [1] RELAY (24-VOLT)(CHASSIS LIGHT)  
7C. 161-3128 [1] RELAY (24-VOLT)(HORN)  
7D. 161-3128 [1] RELAY (24-VOLT)(ELECTRIC LIFT PUMP)  
7E. 161-3128 [1] RELAY (24-VOLT)(BOOM LIGHTS)  
7F. 161-3128 [1] RELAY (24-VOLT)(CAB LIGHT)  
7G. 161-3128 [1] RELAY (24-VOLT)(ELECTRIC PRIMING)  
7H. 161-3128 [1] RELAY (24-VOLT)(FUEL TRANSFER PUMP)  
8. 170-6888 [1] PULLER-FUSE  
9. 377-8061 [1] BLOCK AS-FUSE  
  9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
  M   METRIC PART
 

#M00705400295
 

494-7495: PANEL GP-FUSE

494-7495 PANEL GP-FUSE -RELAY
S/N NLG10001-UP; PRG10001-UP
PART OF 479-7794 WIRING GP-CAB
i06609252 M0070540
  For full view, you need register

Parts for your 313F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-8490 [16] FUSE (10-AMPERE)  
2. 113-8491 [7] FUSE (15-AMPERE)  
3. 113-8492 [4] FUSE (20-AMPERE)  
4. 113-8493 [3] FUSE (25-AMPERE)  
5. 124-3548 [3] FUSE (30-AMPERE)  
6. 141-2759 [9] FUSE (5-AMPERE)  
7. 161-3128 [1] RELAY (24-VOLT)(NEUTRAL START)  
7A. 161-3128 [1] RELAY (24-VOLT)(CHASSIS LIGHT)  
7B. 161-3128 [1] RELAY (24-VOLT)(HORN)  
7C. 161-3128 [1] RELAY (24-VOLT)(LIFTING)  
7D. 161-3128 [1] RELAY (24-VOLT)(BOOM LIGHT)  
7E. 161-3128 [1] RELAY (24-VOLT)(CAB LIGHT)  
7F. 161-3128 [1] RELAY (24-VOLT)(PRIMING PUMP)  
7G. 161-3128 [1] RELAY (24-VOLT)(CONTROL UNIT)  
8. 170-6888 [1] PULLER-FUSE  
9. 377-8061 [1] BLOCK AS-FUSE  
  9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  095-0742 M [2] SCREW-MACHINE (M6X1X16-MM)  
  M   METRIC PART
 

#M00705400296
 

324-5778: PANEL GP-SWITCH

324-5778 PANEL GP-SWITCH -ENGINE START
S/N NLG1-UP; PRG1-UP
CANNOT BE USED WITH @@@@@337-8363@@@@@
i04025373 M0070540
  For full view, you need register

Parts for your 313F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 328-0246 Y [1] PANEL GP-SWITCH (ENGINE START)  
3. 353-1910 C [1] COVER  
4. 096-6166 C [2] WASHER-HARD (4.5X9X1-MM THK)  
5. 8C-7581 CM [2] SCREW-MACHINE (M4X0.7X8-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00705400297
 

328-0246: PANEL GP-SWITCH

328-0246 PANEL GP-SWITCH -ENGINE START
S/N NLG1-UP; PRG1-UP
PART OF 324-5778, 369-0145 PANEL GP-SWITCH
i04025989 M0070540
  For full view, you need register

Parts for your 313F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 255-2752 JY [1] SWITCH GP-START (IGNITION)  
2. 350-8461 C [1] PANEL-SWITCH  
  C   CHANGE FROM PREVIOUS TYPE
  J   REQUIRES CORPORATE KEY
  Y   SEPARATE ILLUSTRATION
 

#M00705400298
 

369-0145: PANEL GP-SWITCH

369-0145 PANEL GP-SWITCH -ENGINE SPEED, START
S/N NLG1-UP; PRG1-UP
PART OF 507-0042, 507-0043, 507-0044, 507-0045, 507-0046, 507-0047, 507-0048, 507-0049, 507-0050, 507-0051, 510-1045, 510-1046, 510-1047, 510-1048, 510-1049, 510-1050, 510-1051, 510-1052, 510-1053, 510-1054, 518-8360, 518-8361, 518-8362, 518-8363, 518-8364, 518-8365, 518-8366, 544-1291, 544-1292, 544-1293, 546-6180, 546-6181, 546-6183, 546-6184, 549-4619, 555-8086, 561-5594, 561-5595 DISTRIBUTION AR
CANNOT BE USED WITH @@@@@366-8683@@@@@
i04413925 M0070540
  For full view, you need register

Parts for your 313F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 328-0246 Y [1] PANEL GP-SWITCH (ENGINE START)  
3. 363-9619 [1] COVER  
4. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
5. 8C-7581 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#M00705400299
 

349-2167: RECEIVER GP-LASER

349-2167 RECEIVER GP-LASER -GRADE CONTROL
S/N NLG1-UP; PRG1-UP
PART OF 468-7594 STICK AR, 394-7646 STICK AR-HOE
i04264953 M0070540
  For full view, you need register

Parts for your 313F EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 203-8132 [4] SPACER  
2. 349-2172 [1] PLATE AS  
3. 312-0756 [1] RECEIVER AS-LASER (WITH ANGLE SENSOR)  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
6. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
7. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Safety Messages
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
General Information
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
Display Description
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
Flashing Messages
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
System Components
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
Grade Control Guidance Screen
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
Grade Control Configuration
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
Machine Monitoring System Configuration
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
Startup
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
Operator Controls
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
End User License Agreement
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
Glossary
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
Safety Messages
Cat Grade Control for 2D and 3D Excavators
General Information
Cat Grade Control for 2D and 3D Excavators
System Components
Cat Grade Control for 2D and 3D Excavators
Startup
Cat Grade Control for 2D and 3D Excavators
System Components Troubleshooting
Cat Grade Control for 2D and 3D Excavators
GNSS Systems Troubleshooting
Cat Grade Control for 2D and 3D Excavators
UTS Systems Troubleshooting
Cat Grade Control for 2D and 3D Excavators
2D Guidance Method
Cat Grade Control for 2D and 3D Excavators
Special Instruction
Machine Guidance Upgrades For Cat<SUP>&reg;</SUP> Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Procedure to Reimburse Software Enabled Attachment (SEA) {7220, 7490, 7601, 7603, 7610, 7620}
Procedure to Reimburse Software Enabled Attachment (SEA) {7220, 7490, 7601, 7603, 7610, 7620}
Technical Information Bulletin
SNM940 Radio CAN Connection to the Cat<SUP>&reg;</SUP> Grade Control or AccuGrade System Could Cause Communication Failure with GNSS System {7220, 733T}
SNM940 Radio CAN Connection to the Cat® Grade Control or AccuGrade System Could Cause Communication Failure with GNSS System {7220, 733T}
Systems Operation
General Information
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
System Components
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
Guidance Terms
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
Machine Dimensions
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
General Information
2D and 3D GRADE System for Hydraulic Excavators
System Components
2D and 3D GRADE System for Hydraulic Excavators
Display Firmware Upgrade
2D and 3D GRADE System for Hydraulic Excavators
Testing and Adjusting
Machine Dimensions - Configure
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
System - Set
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
System - Calibrate
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
System Accuracy - Test
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
System - Set
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
System Accuracy - Test
2D and 3D GRADE System for Hydraulic Excavators

Caterpillar Parts SIS Catalog 313F :

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.