AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

382-9606 STARTING MOTOR GP-AIR S/N PYA1-UP PART OF 399-0713 STARTING MOTOR GP-AIR AN ATTACHMENT 3516C


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP

INDUSTRIAL ENGINE 3516C INDUSTRIAL ENGINE PYA
 3516C Generator Set PYA00001-UP M0070670 3516C PYA   (2016)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
PLATE AS-BRUSH
3T-9525 PLATE AS-BRUSH
PLUG GP-MOTOR
439-8543 PLUG GP-MOTOR
STARTING MOTOR GP-AIR
382-9606 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
392-9042 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
399-0713 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
424-9805 STARTING MOTOR GP-AIR
 

#M00706700530
 

382-9606: STARTING MOTOR GP-AIR

382-9606 STARTING MOTOR GP-AIR
S/N PYA1-UP
PART OF 399-0713 STARTING MOTOR GP-AIR
AN ATTACHMENT
i04592176 M0070670
3829606 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 297-5479 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
2. 6K-1972 [4] ELBOW-FLARED  
3. 539-6084 [2] HOSE AS (AIR)  
4. 3M-7045 [1] PLUG (3/4-14 NPT-THD)  
   
    AVAILABLE REPAIR KIT(S):
  278-0513 [1] KIT-STARTER REPAIR  
    (INCLUDES STARTER DRIVE)
  385-1748 [1] KIT-ENGINE OVERHAUL  
    (INCLUDES 0-RINGS, BEARINGS, SCREWS, RING, SPACERS, SHIMS, ELEMENTS, SHAFTS, LOCTITE & WASHERS)
  465-8142 [1] KIT-SERVICE (CONTROLLER, O-RINGS, FASTENERS)  
    (INCLUDES LOCTITE)
  533-5902 [1] KIT-SERVICE  
    (INCLUDES RETAINER, RETAINER PLATE, SCREW, & SILENCER ELEMENT)
 

#M00706700531
 

392-9042: STARTING MOTOR GP-AIR

392-9042 STARTING MOTOR GP-AIR -RH
S/N PYA1-UP
FOR USE WITH "00" FLYWHEEL HOUSING, SINGLE POINT RETURN PRELUBRICATION AND INTEGRATED STARTER EXHAUST
AN ATTACHMENT
i04999503 M0070670
3929042 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2L-2811 [2] FITTING  
3. 4H-7869 [1] GASKET  
4. 4N-3411 J [1] VALVE GP-RELAY  
5. 4W-5107 Y [1] STARTING MOTOR GP-AIR  
6. 6N-3170 I [1] HOSE AS  
8. 8N-8446 [1] ELBOW  
9. 8N-8447 [1] ELBOW  
10. 8N-8449 [1] BRACKET  
11. 8N-8488 [1] SILENCER-AIR STARTING  
12. 119-6284 Y [1] LUBRICATOR GP-AIR MOTOR  
13. 9X-6380 [3] BOLT (5/8-11X1.5-IN)  
14. 1B-2886 [2] BOLT (1/2-13X3.75-IN)  
15. 1D-4566 [4] BOLT (1/2-13X3.5-IN)  
16. 1D-4569 [2] BOLT (1/2-13X4.25-IN)  
17. 3L-8993 [1] FITTING  
18. 4M-5317 [1] BUSHING-REDUCER  
20. 5B-7666 [1] ELBOW  
21. 5L-2534 [1] U-BOLT  
22. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
23. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 6B-3685 [1] ELBOW  
25. 6K-1972 [1] ELBOW-FLARED  
26. 8N-8451 [1] GASKET  
27. 8N-8452 [1] GASKET  
28. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
29. 3K-6060 [2] LOCKNUT (3/8-16-THD)  
   
    AVAILABLE REPAIR KIT(S):
  7C-5105 [1] KIT-VALVE SEAL (AIR STARTING)  
    (INCLUDES SEALS, RETAINER & BUMPER)
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Y   SEPARATE ILLUSTRATION
 

#M00706700532
 

399-0713: STARTING MOTOR GP-AIR

399-0713 STARTING MOTOR GP-AIR -RH
S/N PYA1-UP
AN ATTACHMENT
i04994800 M0070670
3990713 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6089 [1] GASKET  
2. 382-9606 Y [1] STARTING MOTOR GP-AIR  
3. 7J-8902 [3] BOLT-12 POINT HEAD (5/8-11X1.5-IN)  
4. 5P-8247 [3] WASHER-HARD (17X32X3.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#M00706700533
 

424-9805: STARTING MOTOR GP-AIR

424-9805 STARTING MOTOR GP-AIR -RH
S/N PYA1-UP
VANE
AN ATTACHMENT
i05114525 M0070670
4249805 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2L-2811 [2] FITTING  
2. 204-0241 [1] FITTING  
3. 4H-7869 [1] GASKET  
4. 4N-3411 J [1] VALVE GP-RELAY  
5. 4W-5107 Y [1] STARTING MOTOR GP-AIR  
6. 6N-3170 I [1] HOSE AS  
7. 8N-8447 [1] ELBOW  
8. 8N-8449 [1] BRACKET  
9. 8N-8488 [1] SILENCER-AIR STARTING  
10. 119-6284 Y [1] LUBRICATOR GP-AIR MOTOR  
11. 9X-6380 [3] BOLT (5/8-11X1.5-IN)  
12. 1B-2886 [2] BOLT (1/2-13X3.75-IN)  
13. 1D-4569 [2] BOLT (1/2-13X4.25-IN)  
14. 3L-8993 [1] FITTING  
15. 4M-5317 [1] BUSHING-REDUCER  
17. 5B-7666 [1] ELBOW  
18. 5L-2534 [1] U-BOLT  
19. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
20. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 6B-3685 [2] ELBOW  
22. 6K-1972 [1] ELBOW-FLARED  
23. 8N-8451 [1] GASKET  
24. 8N-8452 [1] GASKET  
26. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
   
    AVAILABLE REPAIR KIT(S):
  7C-5105 J [1] KIT-VALVE SEAL (AIR STARTING)  
    (INCLUDES SEALS, RETAINER & BUMPER)
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Y   SEPARATE ILLUSTRATION
 

#M00706700534
 

494-0941: STARTING MOTOR GP-AIR

494-0941 STARTING MOTOR GP-AIR -RH
S/N PYA1-UP
VANE
AN ATTACHMENT
i06638569 M0070670
4940941 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2L-2811 [2] FITTING  
2. 4H-7869 [1] GASKET  
3. 4N-3411 [1] VALVE GP-RELAY  
  7C-5105 [1] KIT-VALVE SEAL (AIR STARTING)  
4. 7C-3372 Y [1] STARTING MOTOR GP-AIR  
5. 6N-3170 I [1] HOSE AS  
6. 8N-8446 [1] ELBOW  
7. 8N-8447 [1] ELBOW  
8. 8N-8449 [1] BRACKET  
9. 8N-8488 [1] SILENCER-AIR STARTING  
10. 119-6284 Y [1] LUBRICATOR GP-AIR MOTOR  
11. 204-0241 [1] FITTING  
12. 9X-6380 [3] BOLT (5/8-11X1.5-IN)  
13. 1B-2886 [2] BOLT (1/2-13X3.75-IN)  
14. 1D-4566 [4] BOLT (1/2-13X3.5-IN)  
15. 1D-4569 [2] BOLT (1/2-13X4.25-IN)  
16. 3K-6060 [2] LOCKNUT (3/8-16-THD)  
17. 3L-8993 [1] FITTING  
18. 4M-5317 [1] BUSHING-REDUCER  
19. 5B-7666 [1] ELBOW  
20. 5L-2534 [1] U-BOLT  
21. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
22. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 6B-3685 [2] ELBOW  
24. 6K-1972 [1] ELBOW-FLARED  
25. 8N-8451 [1] GASKET  
26. 8N-8452 [1] GASKET  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#M00706700535
 

4W-5107: STARTING MOTOR GP-AIR

4W-5107 STARTING MOTOR GP-AIR
S/N PYA1-UP
PART OF 392-9042, 424-9805 STARTING MOTOR GP-AIR
FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@
AN ATTACHMENT
i00109293 M0070670
4W5107 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6078 [1] PINION-DRIVE (12-TEETH)  
2. 2W-6082 [1] KIT-DRIVE (AIR STARTING MOTOR)  
    (INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT)
3. 3B-4505 [8] LOCKWASHER  
4. 5N-8363 [1] COVER AS  
  4D-3118 [3] PLUG-PIPE  
5. 5N-8364 [1] HOUSING-MOTOR  
6. 5N-8384 [1] SHAFT-DRIVE  
7. 5N-8387 [1] CASE-GEAR  
8. 5N-8403 M [1] SCREW-PINION (M12X1.25X70-MM)  
9. 5N-8425 [1] WASHER (12.2X41.5X4.5-MM THK)  
10. 6V-3959 [5] LOCKWASHER  
11. 5N-8427 M [4] BOLT-MOTOR (M10X1.5X180-MM)  
12. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
13. 1L-8497 [1] RING-SNAP (SMALL)  
14. 2W-6081 [1] GEAR AS-DRIVE (37-TEETH)  
15. 3J-7719 [1] RING-RETAINING (INNER)  
16. 5N-8365 [1] PLATE-FRONT END  
17. 5N-8367 [1] PLATE-REAR END  
18. 5N-8368 [1] PINION-ROTOR (17-TEETH)  
19. 5N-8372 [1] SPRING-RETURN  
20. 5N-8373 [1] PISTON  
21. 5N-8374 [1] SLEEVE-SPRING  
22. 5N-8375 [1] CUP-SPRING  
23. 5N-8377 [1] BEARING-DRIVE SHAFT  
24. 5N-8378 [1] NUT-ROTOR CLAMP (M5X0.8-THD)  
25. 5N-8379 [1] SEAT-SPRING  
26. 5N-8380 [1] SPRING-PINION  
27. 5N-8381 [1] SPRING-CLUTCH  
28. 5N-8383 [1] CYLINDER  
29. 5N-8388 [1] ROTOR  
30. 5N-8424 [1] BULKHEAD  
31. 5N-8428 [1] WASHER-GEAR (10.1X34X15.5-MM THK)  
32. 5N-9574 [1] JAW AS-CLUTCH  
33. 5P-9514 [1] BALL BEARING  
34. 6J-7855 [1] RING-RETAINING (LARGE)  
35. 6V-1394 [1] BALL BEARING  
36. 6V-3916 [1] BALL BEARING  
37. 6V-3935 [1] RING-RETAINING  
38. 096-4833 M [1] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
39. 6V-3938 M [1] BOLT (M10X1.5X20-MM)  
40. 6V-3939 M [1] BOLT (M12X1.75X60-MM)  
41. 6V-3971 [1] RING-RETAINING (OUTER)  
42. 7F-8671 [1] BALL BEARING  
43. 8B-7624 [1] BALL BEARING  
44. 039-4317 [2] WASHER-SPRING  
   
    AVAILABLE REPAIR KIT(S):
  5N-8390 [1] KIT-SEAL & VANE (AIR STARTING MOTOR)  
    (INCLUDES PINS, RINGS, SEALS & VANE)
  M   METRIC PART
 

#M00706700536
 

7C-3372: STARTING MOTOR GP-AIR

7C-3372 STARTING MOTOR GP-AIR
S/N PYA1-UP
PART OF 494-0941 STARTING MOTOR GP-AIR
FIELD REPLACEMENT FOR @@@@@ 4W-5107@@@@@
AN ATTACHMENT
i00091625 M0070670
7C3372 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 096-4833 M [1] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
2. 5N-8363 [1] COVER AS  
2A. 4D-3118 [3] PLUG-PIPE  
3. 039-4317 [2] WASHER-SPRING  
4. 5N-8383 [1] CYLINDER  
5. 6V-3916 [1] BALL BEARING  
6. 5N-8375 [1] CUP-SPRING  
7. 5N-8381 [1] SPRING-CLUTCH  
8. 2W-6081 [1] GEAR AS-DRIVE (37-TEETH)  
9. 5N-9574 [1] JAW AS-CLUTCH  
10. 5N-8387 [1] CASE-GEAR  
11. 5N-8424 [1] BULKHEAD  
12. 6V-3940 M [8] BOLT (M8X1.25X25-MM)  
13. 3J-7719 [1] RING-RETAINING (INNER)  
14. 7F-8671 [1] BALL BEARING  
15. 5N-8428 [1] WASHER-GEAR (10.1X34X15.5-MM THK)  
16. 5N-8427 M [4] BOLT-MOTOR (M10X1.5X180-MM)  
17. 7X-0796 [5] LOCKWASHER (10.2X18.4X2.5-MM THK)  
18. 5N-8403 M [1] SCREW-PINION (M12X1.25X70-MM)  
19. 2W-6078 [1] PINION-DRIVE (12-TEETH)  
20. 5N-8380 [1] SPRING-PINION  
21. 2W-6082 [1] KIT-DRIVE (AIR STARTING MOTOR)  
    (INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT)
22. 8B-7624 [1] BALL BEARING  
23. 5N-8379 [1] SEAT-SPRING  
24. 5N-8372 [1] SPRING-RETURN  
25. 5N-8384 [1] SHAFT-DRIVE  
26. 6V-3938 M [1] BOLT (M10X1.5X20-MM)  
27. 5P-9514 [1] BALL BEARING  
28. 5N-8377 [1] BEARING-DRIVE SHAFT  
29. 5N-8373 [1] PISTON  
30. 6V-3939 M [1] BOLT (M12X1.75X60-MM)  
31. 5N-8368 [1] PINION-ROTOR (17-TEETH)  
32. 6V-1394 [1] BALL BEARING  
33. 5N-8365 [1] PLATE-FRONT END  
34. 111-4399 [1] HOUSING-MOTOR  
35. 5N-8388 [1] ROTOR  
36. 5N-8367 [1] PLATE-REAR END  
37. 5N-8378 [1] NUT-ROTOR CLAMP (M5X0.8-THD)  
38. 1L-8497 [1] RING-SNAP  
39. 6J-7855 [1] RING-RETAINING  
40. 6V-3935 [1] RING-RETAINING  
41. 3B-4505 [8] LOCKWASHER  
42. 5N-8425 [1] WASHER (12.2X41.5X4.5-MM THK)  
43. 6V-3971 [1] RING-RETAINING (OUTER)  
44. 5N-8374 [1] SLEEVE-SPRING  
   
    AVAILABLE REPAIR KIT(S):
  5N-8390 [1] KIT-SEAL & VANE (AIR STARTING MOTOR)  
    (INCLUDES PINS, O-RINGS, SEALS, VANE, RETAINER & PISTON BUMPERS)
  M   METRIC PART
 

#M00706700537
 

207-1562: STARTING MOTOR GP-ELECTRIC

207-1562 STARTING MOTOR GP-ELECTRIC
S/N PYA1-UP
24-VOLT
PART OF 380-7260 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i01592636 M0070670
2071562 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH (STARTING MOTOR)  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 283-1107 [1] KIT-CONNECTOR (STARTING MOTOR)  
    (INCLUDES CONNECTORS, BOLT & TERMINAL-STARTER)
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 3E-7775 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 0S-1597 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 548-9596 [1] KIT-SOLENOID (24-VOLT)(INSULATED)  
    (INCLUDES BOLT, NUT AS, NUT, & CONNECTORS)
26. 6V-8378 [3] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
29. 9X-4824 [1] COVER-STARTING MOTOR  
30. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER ASSEMBLIES, SEALS, NUT, GASKET & RETAINER)
31. 8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES BRUSHES, SPRINGS, SCREWS, SCREW ASSEMBLIES, & SEAL)
32. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
   
    AVAILABLE REPAIR KIT(S):
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW ASSEMBLIES, WASHERS, SPACER & NUT)
 

#M00706700538
 

335-4149: STARTING MOTOR GP-ELECTRIC

335-4149 STARTING MOTOR GP-ELECTRIC -LH
S/N PYA1-UP
24-VOLT
AN ATTACHMENT
i05069217 M0070670
3354149 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 352-9766 CY [2] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
2. 9Y-6089 [2] GASKET  
3. 7J-8902 [6] BOLT-12 POINT HEAD (5/8-11X1.5-IN)  
4. 7L-5887 [1] CABLE AS (0000-GA)  
  3L-7634 [2] TERMINAL-RING (0000-GA, 1/2-IN SCREW)  
5. 294-2318 C [2] COVER-TERMINAL (RED)  
6. 4L-6155 [1] CABLE AS (0000-GA)  
  3L-7634 [2] TERMINAL-RING (0000-GA, 1/2-IN SCREW)  
7. 3L-6836 [1] SPACER (0.5X0.75X0.56-IN THK)  
8. 294-2319 C [2] COVER-TERMINAL (BLACK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#M00706700539
 

352-9766: STARTING MOTOR GP-ELECTRIC

352-9766 STARTING MOTOR GP-ELECTRIC
S/N PYA1-UP
24-VOLT
PART OF 335-4149 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT
i04040907 M0070670
3529766 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3516C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 Y [1] PLATE AS-BRUSH (STARTING MOTOR)  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG (FELT)  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 8C-3089 [1] SEAL-O-RING  
17. 4M-1853 [1] LEVER AS-SHIFT  
18. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
19. 7L-2894 [4] GASKET  
20. 4M-1831 [4] PLUG-LEVER HOUSING  
21. 4M-1854 [1] SHAFT-LEVER  
22. 1H-1023 [1] SEAL-O-RING  
23. 2D-6392 [1] SEAL-O-RING  
24. 528-6787 [1] HOUSING AS-DRIVE  
25. 6N-3826 [1] DRIVE AS-MOTOR  
26. 2H-3429 [1] RING-RETAINING  
27. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 6N-3279 [1] INSULATOR  
30. 0S-1597 [13] BOLT (1/4-28X1-IN)  
31. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
32. 1H-2629 [3] STRIP-INSULATION  
33. 7M-0324 [1] COIL AS-FIELD  
34. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
35. 7F-3488 [6] SHOE-POLE  
36. 7M-8651 [1] ARMATURE AS  
37. 7M-0325 [1] INSULATOR  
38. 3T-9524 [6] BRUSH AS  
39. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
40. 338-3453 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
41. 3R-8801 [1] CLAMP  
42. 8F-1434 [2] LOCKWASHER  
43. 6V-8188 [6] NUT (1/2-13-THD)  
44. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
45. 4B-2049 [6] NUT (10-32-THD)  
46. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
47. 3T-9494 [6] SPRING  
48. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
49. 9G-4101 [1] BUSHING-END  
50. 3T-3424 [3] PLUG-FELT  
51. 3T-3423 [3] CUP  
52. 1M-9968 [1] BUSHING  
53. 2F-6678 [1] SEAL-LIP TYPE  
54. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
55. 4M-1896 [1] BUSHING-TERMINAL  
56. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
57. 351-8955 [1] SEAL-O-RING  
58. 125-6535 [1] COVER-STARTING MOTOR  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Starting Motor - Inspect
3500 Petroleum Engines and Petroleum Generator Sets
Starting the Engine
3500 Petroleum Engines and Petroleum Generator Sets
Cold Weather Starting
3500 Petroleum Engines and Petroleum Generator Sets
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Systems Operation
Starting System
3500 Engines
Hydraulic Starting System
3500 Engines
Reference Information
Large Engine Control Panel II (LECP II)
Reference Information
Large Engine Control Panel III (LECP III)
Testing and Adjusting
Electric Starting System
3500 Engines
Pinion Clearance Adjustment
3500 Engines
General Information (Air/Electric Starting System)
3500 Engines
Troubleshooting
Air Starting Motor
3512C and 3516C Engines
Disassembly and Assembly
Air Starting Motor - Assemble
3500 Engines
Air Starting Motor - Disassemble
3500 Engines
Air Starting Motor - Install
3500 Engines
Air Starting Motor - Remove
3500 Engines
Electric Starting Motor - Remove and Install
3500 Engines
Air Starting Motor - Assemble
3500 Engines
Air Starting Motor - Disassemble
3500 Engines

Caterpillar Parts SIS Catalog 3516C :

SENSOR GP-TEMPERATURE
212-3423 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
195-2150 SENSOR GP-TEMPERATURE
SENSOR GP-SPEED
9X-5392 SENSOR GP-SPEED
SENSOR GP-SPEED
522-1644 SENSOR GP-SPEED
SENSOR GP-SPEED
295-4636 SENSOR GP-SPEED
SENSOR GP-SPEED
265-9034 SENSOR GP-SPEED
SENSOR GP-SPEED
265-9033 SENSOR GP-SPEED
SENSOR GP-SPEED
212-3426 SENSOR GP-SPEED
STARTING MOTOR GP-AIR
392-9042 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
399-0713 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
424-9805 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
494-0941 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
4W-5107 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
7C-3372 STARTING MOTOR GP-AIR
STARTING MOTOR GP-ELECTRIC
207-1562 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
335-4149 STARTING MOTOR GP-ELECTRIC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.