ELECTRICAL AND STARTING SYSTEM
HARNESS GPELECTRICAL AND STARTING SYSTEM
HARNESS GP#M00707620350
491-4004: HARNESS AS-PANEL
491-4004 HARNESS AS-PANEL -INTERCONNECT
S/N NWD1-UP
VOLTAGE REGULATOR
PART OF 491-4000 WIRING GP-GENERATOR
AN ATTACHMENT
S/N NWD1-UP
VOLTAGE REGULATOR
PART OF 491-4000 WIRING GP-GENERATOR
AN ATTACHMENT
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 112-7497 | [3] | END-WIRE (14-GA) | ||
| 110-8714 | [6] | END-WIRE (18-GA) | ||
| 109-3038 | [22] | END-WIRE (16-GA) | ||
| 421-7234 E | SLEEVE (36-CM) | |||
| 3S-2093 B | [30] | STRAP-CABLE | ||
| 2L-8077 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(10-CM) | |||
| 5P-6001 D | TUBE-HEAT SHRINK (4.75-MM DIA)(0.3-M) | |||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#M00707620351
532-6163: HARNESS AS-PANEL
532-6163 HARNESS AS-PANEL
S/N NWD1-UP
EMCP 4.3, EMCP 4.4
PART OF 540-3832 PANEL GP-ELECTRONIC
AN ATTACHMENT
S/N NWD1-UP
EMCP 4.3, EMCP 4.4
PART OF 540-3832 PANEL GP-ELECTRONIC
AN ATTACHMENT
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [5] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 109-3038 | [85] | END-WIRE (16-GA) | ||
| 110-8714 | [60] | END-WIRE (18-GA) | ||
| 112-7497 | [1] | END-WIRE (14-GA) | ||
| 8T-8737 | [60] | PLUG-SEAL | ||
| 103-0213 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 9W-1951 | [2] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 134-2540 | [2] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 9X-3402 | [96] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [96] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [77] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [77] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | ||
| 288-7324 | [1] | SEAL-CONNECTOR | ||
| 421-7234 E | SLEEVE (35-CM) | |||
| 3S-2093 | [70] | STRAP-CABLE | ||
| 5P-2321 | [9] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 2L-8077 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 5P-6001 D | TUBE-HEAT SHRINK (4.75-MM DIA)(2-M) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(24-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(125-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(260-CM) | |||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#M00707620352
542-9116: HARNESS AS-PANEL
542-9116 HARNESS AS-PANEL
S/N NWD1-UP
PART OF 522-1020 WIRING GP-GENERATOR
AN ATTACHMENT
S/N NWD1-UP
PART OF 522-1020 WIRING GP-GENERATOR
AN ATTACHMENT
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 5P-6001 D | TUBE-HEAT SHRINK (4.75-MM DIA)(0.2-M EACH) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(10-CM) | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#M00707620353
242-9752: HARNESS AS-POWER
242-9752 HARNESS AS-POWER -DIGITAL VOLTAGE REGULATOR
S/N A5A1-UP; 2SN1-UP; 9CN1-UP; AAR1-UP; A4X1-UP; A4Y1-UP; A4Z1-UP
PART OF 242-7961 WIRING GP-GENERATOR
AN ATTACHMENT
S/N A5A1-UP; 2SN1-UP; 9CN1-UP; AAR1-UP; A4X1-UP; A4Y1-UP; A4Z1-UP
PART OF 242-7961 WIRING GP-GENERATOR
AN ATTACHMENT
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS#M00707620354
365-4507: HARNESS AS-POWER
365-4507 HARNESS AS-POWER -VALVE MECHANISM
S/N NWD1-UP
PART OF 362-1366 VALVE MECHANISM GP
S/N NWD1-UP
PART OF 362-1366 VALVE MECHANISM GP
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS#M00707620355
418-6968: HARNESS AS-POWER
418-6968 HARNESS AS-POWER -IGNITION, LH
S/N NWD1-UP
PART OF 418-6967 IGNITION GP-GAS ENGINE
AN ATTACHMENT
S/N NWD1-UP
PART OF 418-6967 IGNITION GP-GAS ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7G-7917 | [13] | PLUG-SEAL | ||
| 5P-6009 D | TUBE-HEAT SHRINK (9.52-MM DIA)(0.4-M) | |||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 8N-1514 | [1] | PLUG AS-CONNECTOR (37-PIN) | ||
| 8N-1521 | [1] | BELL AS-END | ||
| 8T-8730 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-6857 | [24] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 124-0284 E | TUBE-HEAT SHRINK (3.2-MM DIA)(56-CM) | |||
| 1P-0810 B | [1] | TAPE-ELECTRICAL | ||
| 176-2943 | [8] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#M00707620356
418-6969: HARNESS AS-POWER
418-6969 HARNESS AS-POWER -IGNITION, RH
S/N NWD1-UP
PART OF 418-6967 IGNITION GP-GAS ENGINE
AN ATTACHMENT
S/N NWD1-UP
PART OF 418-6967 IGNITION GP-GAS ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5P-6009 D | [1] | TUBE-HEAT SHRINK (9.52-MM DIA)(0.4-M) | ||
| 7G-7917 | [13] | PLUG-SEAL | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 8N-1514 | [1] | PLUG AS-CONNECTOR (37-PIN) | ||
| 8N-1521 | [1] | BELL AS-END | ||
| 8T-8730 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-6857 | [24] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 124-0284 E | TUBE-HEAT SHRINK (3.2-MM DIA)(56-CM) | |||
| 1P-0810 B | [1] | TAPE-ELECTRICAL | ||
| 176-2943 | [8] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#M00707620357
211-2003: HARNESS AS-SENSOR
211-2003 HARNESS AS-SENSOR
S/N NWD1-UP
PART OF 418-6974 WIRING GP-ENGINE
AN ATTACHMENT
S/N NWD1-UP
PART OF 418-6974 WIRING GP-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-8729 | [24] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| (EACH INCLUDES) | ||||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3132 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 8T-8732 | [8] | RECEPTACLE-CONNECTOR (3-PIN) | ||
| 114-8843 E | SLEEVE-PLASTIC (160- CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (20-CM) | |||
| 8T-8730 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-6009 D | TUBE-HEAT SHRINK (9.52-MM DIA)(1-M) | |||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(56-CM) | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M00707620358
360-9144: HARNESS AS-SENSOR
360-9144 HARNESS AS-SENSOR
S/N NWD1-UP
PART OF 418-6971, 575-2914 WIRING GP-ENGINE
AN ATTACHMENT
S/N NWD1-UP
PART OF 418-6971, 575-2914 WIRING GP-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 250-3485 | [1] | BOOT | ||
| 8T-8729 | [24] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3132 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 8T-8732 | [8] | RECEPTACLE-CONNECTOR (3-PIN) | ||
| 8T-8730 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-6009 D | TUBE-HEAT SHRINK (9.52-MM DIA)(0.5-M) | |||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(24-CM) | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#M00707620359
388-6286: HARNESS AS-SWITCH
388-6286 HARNESS AS-SWITCH -RAISE, LOWER
S/N NWD1-UP
PART OF 449-8860 SWITCH GP-TOGGLE
AN ATTACHMENT
S/N NWD1-UP
PART OF 449-8860 SWITCH GP-TOGGLE
AN ATTACHMENT
For full view, you need register
Parts for your G3516C INDUSTRIAL ENGINE:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
HARNESS GP
Special Instruction
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
